Supplemental Proceedings

Book
TOC

Actions

Share

About this book

Contains papers relating to materials processing and interfaces presented at various symposia at the 2012 TMS Annual Meeting.

Author Bios

Headquartered in the United States but international in both its membership and activities, The Minerals, Metals & Materials Society (TMS) is a rare professional organization that encompasses the entire range of materials and engineering, from minerals processing and primary metals production to basic research and the advanced applications of materials.

Free Access

Front Matter (Pages: i-xix)

Structural Coatings in Aluminum Alloy Microtruss Materials (Pages: 1-10)

Bosco Yu, Glenn D. Hibbard,

Laser Cladding of High-Performance CPM Tool Steels on Hardened HI 3 Hot-Work Tool Steel for Automotive Tooling Applications (Pages: 11-18)

Jianyin Chen, Lijue Xue,

Electron Beam Deposited Multilayer Optical Interference Coatings Using Oxide Composites (Pages: 19-26)

Ankush N Nayak, N K Sahoo, R B Tokas, Arup Biswas, Nitin M Kamble,

Microstructure and Wear Properties of Laser In-situ Formation of TiBx and TiC Titanium Composite Coatings (Pages: 27-34)

Jing Liang, Changsheng Liu, Suiyuan Chen, Cuixia Ren,

Creep Behavior of Plasma Sprayed Y-PSZ Coated 6063-T6 Aluminum Alloy (Pages: 35-39)

Eray Erzi, Cem Kahruman, Suat Yilmaz,

Contribution of Ti Addition to the Electronic Structure and Adhesion at the Fe₂Al₅/Fe Interface in 55%A1-Zn Coating (Pages: 41-48)

Guangxin Wu, Yuling Ren, Jieyu Zhang, Kuochih Chou,

The Roles of Diffusion Factors in Electrochemical Corrosion of TiN and CrN (CrSiCN) Coated Mild Steel and Stainless Steel (Pages: 49-56)

Feng Cai, Q. Yang, X. Huang,

Effect of Electroplating Parameters on “HER” Current Density in Ni-MoS₂ Composite Plating (Pages: 57-64)

Ebru Saraloglu Guler, Ishak Karakaya, Erkan Konca,

Production of Ceramic Layers on Aluminum Alloys by Plasma Electrolytic Oxidation in Alkaline Silicate Electrolytes (Pages: 65-71)

Alex Lugovskoy, Aleksey Kossenko, Barbara Kazanski, Michael Zinigrad,

Abrasive Wear Properties of Plasma Sprayed Y-PSZ Coated 6063-T6 Aluminum Alloy (Pages: 73-77)

Eray Erzi, Selim Yildirim, Suat Yilmaz,

The Electrochemical Behavior of Surgical Grade 316L S S with and without HA Coatings in Simulated Body Fluid (Pages: 79-86)

Tejinder Pal Singh, Harjinder singh, Hazoor Singh, Harpreet Singh Saheet,

Modification Research on the Influence on Corrosion Film Properties of Pb-Ca-Sn Alloys of with Addition of Bi, Ag and Zn (Pages: 87-94)

Lei Xu, Lijun Liu, Peixian Zhu,

Evaluation of Residual Stress in Fe₂B Coating on Ductile Cast Iron (Pages: 95-100)

M. A. Dofiu-Ruiz, N. Lopez Perrusquia, V. Jorge Cortez Suarez, D. Sanchez Huitron,

Influence of Heat Treatment on the Corrosion of Steels in CCS Environment (Pages: 101-110)

A. Pfennig, S. Schulz, T. Werlitz, E. Billow, S. Wetzlich, J. Tietböhl, C. Frieslich, A. Kranzmann,

Microstructure and Property Modifications in Mould Steels Treated by Pulsed Electron Beam (Pages: 111-118)

Kemin Zhang,

Potential Fiberboard Material from Cow Manure and Disposable Water Bottle (Pages: 119-123)

Boon-Chai Ng, Craig Bradfield, Roy Pritish, Marlene Murray,

Influence of Process and Thermo-physical Parameters on. the Heat Transfer at Electron Beam Melting of Cu and Ta (Pages: 125-132)

Katia Vutova, Veliko Donchev, Vania Vassileva, Georgi Mladenov,

Industrial Use of a New Ultrasound Spray for Cooling and Wet Gas Treatment in the Pyrometallurgical Processes (Pages: 133-140)

Milorad Ćirković, Vlastimir Trujić, Željko Kamberović,

Development of 3D Porous Nickel Electrodes for Hydrogen Production (Pages: 141-148)

Valentin Pérez-Herranz, Isaac Herrãiz-Cardona, Emma Ortega, José Garcia-Anton,

Electrochemical Recovery of Zinc Present in the Spent Pickling Baths Coming from Hot Dip Galvanizing Processes (Pages: 149-156)

Valentin Pérez-Herranz, Jordi Carrillo-Abad, Montserrat Garcia-Gabaldon, Emma Ortega,

Laboratory Testing Results of Kinetics and Processing Technology of the Polymetallic Sulphide Concentrate Blagojev Kamen - Serbia (Pages: 157-164)

Milorad Ćirković, Željko Kamberović, Vlastimir Trujić,

Hidrotalcite with Gentamicine, of the Type Mg_0.68Al_0.32(OH)₂ (NO₃)_0.32*0.1H₂O, Formed by Chemical Coprecipitation in Controlled Atmosphere (Pages: 165-172)

H. H. Rodriguez, O. Martinez-Alvarez,

Effect of Thiodiglycolamide Addition to Di-n-hexyl Sulfide on the Pd(II) Extraction Rate (Pages: 173-177)

Hirokazu Narita, Mikiya Tanaka, Shinji Ueno,

Synthesis and Characterization of Metallic Oxides (Pages: 179-186)

Eduardo Brocchi, Marina Doneda, Rogério Navarro, Ana Cristina Wimmer, Rodrigo Souza, José Campos,

Fabrication of Lotus-Type Porous Copper by Centrifugal Casting Technique (Pages: 187-189)

Yun-Soo Lee, Hyeong-Tae Kim, Myoung-Gyun Kim, Soong-Keun Hyun,

Effects of Pulsed Magnetic Annealing on the Grain Boundary of Primary Recrystallized Microstructure in the Grain-Oriented Silicon Steel (Pages: 191-198)

Junjun Huang, Lihua Liu, Xin Xia, Xiang Jiang, Lijuan Li, Qijie Zhai,

Relationship between Heat Input and Microstructure and Mechanical Properties of Laser Beam Welded Superalloy Inconel 718 (Pages: 199-205)

Akin Odabaşi, Necip Ünlü, Gültekin Göller, M. Niyazi Eruslu, E. Sabri Kayali,

Experimental Study on the Behavior of Slag Entrapment and Inclusion Removal in 441 Ladle with Argon Blowing (Pages: 207-213)

Shu-guo Zheng, Miao-yong Zhu, Zhong-fu Cheng,

The Effect of High Superheat on the Solidification Structure and Carbon Segregation of Ferrite-Based Alloy (Pages: 215-221)

Honggang Zhong, Yi Tan, Huigai Li, Xinping Mao, Qijie Zhai,

Refinement of Ligaments of Nanoporous Ag Ribbons by Controlling the Surface Diffusion of Ag (Pages: 223-230)

Tingting Song, Yulai Gao1, Zhonghua Zhang, Qijie Zhai,

Thermal Analysis of the Composition of Poly(Acrylic AcidyCarboxymethylstarch Used as a Polymeric Binder (Pages: 231-238)

Beata Grabowska, Mariusz Holtzer, Sonja Eichholz, Krzysztof Hodor, Ewa Olejnik,

Interfacial Strength of Al/Zr/DU-10%wtMo Subject to Different Loading Modes (Pages: 239-248)

C. Liu, ML. Lovato, W.R. Blumenthal,

Uniaxial Tension of Friction-Welded 304-Stainless Steel and 6061 Aluminum (Pages: 249-256)

C. Liu, M.L. Lovato, W.R. Blumenthal,

Ultra Fast Grain Boundary Segregation In Hot Deformed Nickel (Pages: 257-264)

Marion Allart, Frederic Christien, René Le Gall,

Quantitative NanoSIMS Analysis of Grain Boundary Segregation in Bulk Samples (Pages: 265-271)

F. Christien, C. Downing, K.L. Moore, C.R.M. Grovenor,

The Periodic Unit of Doubly-diffracted Reflections from Periodic Grain Boundaries in Cubic Crystals and Its Relationship with Coincident Site Lattice (Pages: 273-280)

M Shamsuzzoha,

The In-situ Intrinsic Stress Measurements of Cu and Al Thin Films (Pages: 281-288)

Jun Young Yu, Youngman Kim,

Delamination Characterization of Bonded Interface Using Surface Based Cohesive Model (Pages: 289-296)

Manivannan Ramamurthi, Young Suk Kim,

Compressive Strength of Epoxy- Graphite Nanoplatelets Composites (Pages: 297-306)

H. A. Colorado1, A. Wong, J. M. Yang,

Micromechanical Analysis of Influences of Agglomerated Nanotube Interphase on Effective Material Properties of a Three Phase Piezoelectric Nanocomposite (Pages: 307-312)

Tian Tang, Mark F Horstemeyer, Paul Wang,

Effect of Nano-Paper Coating on Flexural Properties of a Fire-Treated Glass Fiber-Reinforced Polyester Composite (Pages: 313-320)

Jamie Skovron, Jinfeng Zhuge, Ali P. Gordon, Jayanta Kapat, Jihua Gou,

Finite Element Modeling of the Nanoscratching of Polymer Surfaces (Pages: 321-328)

William M. Chirdon, Joshua T. Rozas,

Manufacturing and Characterization of an Auxetic Composite (Pages: 329-336)

Fu-pen Chiang Ph.D.,

Microtruss Cellular Nanocomposites (Pages: 337-344)

Khaled Abu Samk, Guojie Huang, Milan Skocic, Hatem S. Zurob, D. Embury, Olivier Bouaziz, Glenn D. Hibbard,

Synthesis of Tailored Core-Shell Magnetic Microparticles for Intravascular Embolization (Pages: 345-352)

Gabriella R. Ferreira, Alexandre P. Umpierre, Fabricio Machado,

Dramatic Expansion of Luminescence Region in GaP/Polymer Nanocomposites (Pages: 353-359)

Sergei L. Pyshkin, John Ballato,

Positron Lifetime Analysis of Polyurea-Nanoclay Composites (Pages: 361-365)

Naidu V. Seetala, Gabriel Burks, Danny Hubbard, Alex Trochez, Valéry N. Khabashesku,

Rheological Properties of Suspensions of Nanopowders Yttrium Oxide (Y₂O₃) and Magnesium-Aluminum Spinel (MgAl₂O₄) (Pages: 367-374)

G. Zyla, M. Cholewa, A. Witek, J.P. Plog, V. Lehmann, T. Oerther, D. Gross,

Thermal Properties of Hemp-High Density Polyethylene Composites: Effect of Two Different Chemical Treatments (Pages: 375-382)

Na Lu, Shubhashini Oza,

Discarded Ultrafine Particulate Carbonaceous Materials Used as Reinforcers of Rubber Vulcanized Products (Pages: 383-388)

Guillermo R. Martin-Cortés, Fabio J. Esper, Luiz Sãlvio Galvão Dantas, Wildor T. Hennies, Francisco R. Valenzuela-Diaz,

Properties of Additional Reinforcers Materials Used to Complement NAOB - A Rubber/Organoclay Nanocomposite Material (Pages: 389-394)

Fabio J. Esper, Guillermo R. Martin-Cortés, Luiz S. G. Dantas, Adriana Cutrim, Wildor T. Hennies, Francisco R. Valenzuela-Diaz,

Thermal Properties of Carbon Nano Tubes Reinforced Mg-Matrix Nanocomposites (Pages: 395-402)

Sardar S. Iqball, Aydin Mustafa, Saikat Talapatra, Peter Filipl,

Designing Layered Double Hydroxides for Targeted Applications (Pages: 403-412)

Jeanne M. Hossenlopp, Stephen Majoni, Cleopas Machingauta,

Electrochemical Synthesis of Layer Double Hydroxides, Its Characterization, and Performance Study for Removal of Nitrate and Arsenic (Pages: 413-420)

Md. Iftikher Haider, Jewel Andrew Gomes, Kevin Urbanczyk, David L. Cocke, Hylton McWhinney, George Irwin, Paul Bernazzani,

Removal of Direct Red and Orange II Azo Dye from Synthetic Textile Water Using Electrochemically Produced Fe-LDH (Pages: 421-428)

Sadia Jame, Jewel Andrew Gomes, David L. Cocke,

Removal of Arsenic Using Green Rust and Other Electrochemically Generated Floe (Pages: 429-436)

Md. Sanoar Rahman, Jewel Andrew Gomes, Kevin Urbanczyk, David L. Cocke,

Formation of Layered Double Hydroxides in Self-Purification of Polynary Metal Electroplating Wastewaters for Effective Removal of Anionic Dye (Pages: 437-444)

Ji Zhi Zhou, Guangren Qian, Chong Liu, Yueying Wu, Xiuxiu Ruan, Yunfeng Xu, Jianyong Liu,

Characterization and Chemical Modification of Electrochemically Produced Layered Double Hydroxides as Nanomaterials (Pages: 445-452)

Md. Kamrul Islam, Jewel Andrew Gomes, Paul Bemazzani,

A Review on Alloying in Tungsten Heavy Alloys (Pages: 453-465)

Animesh Bose, Rajendra Sadangi, Randall M. German,

Low-Thermal Load Consolidation of Sm-Fe-N Flake Powder by Combination of Cyclic Compression and Current Sintering (Pages: 467-473)

Kenta Takagi, Hiroyuki Nakayama, Kimihiro Ozaki,

Fabrication of TiN/Fe-Al Cermet from Mixture of TiN, Fe and Al Powders (Pages: 475-479)

Hiroyuki Nakayama, Kimihiro Ozaki, Keizo Kobayshi,

Transparent Polycrystalline Alumina Obtained by SPS: Single and Double Doping Effect (Pages: 481-487)

Burcu Apak, Halide Esra Kanbur, Esra Ozkan Zayim, Gultekin Goller, Onuralp Yucel, Filiz Cinar Sahin,

Sintering of Nanocrystalline Tungsten Powder (Pages: 489-496)

William S. de Rosset,

Effect of Powder Synthesis and Processing on Luminescence Properties (Pages: 497-504)

J. McKittrick1, J.K. Han, J.I. Choi, JB. Talbot,

Effect of Rapid Solidification and Heat Treatment on D2 Tool Steel (Pages: 505-512)

Pooya Delshad Khatibi, Douglas G. Ivey, Hani Henein,

Development of Solid Freeform Fabrication for Metallic Parts Using Selective Inhibition of Sintering (Pages: 513-520)

M. Yoozbashizadeh, B. Khoshnevis,

Numerical Simulation of Cold Pressing of Armstrong CP-Ti Powders (Pages: 521-528)

Adrian S. Sabau, Sarma B. Gorti, William H. Peter, Wei Chen, Yukinori Yamamoto,

The Effect of Coke Particle Size on the Thermal Profile of the Sintering Process Product (Pages: 529-536)

N. Tahanpesaranedezfuly, A. Heidary Moghadam,

Powder Material Principles Applied to Additive Manufacturing (Pages: 537-544)

David L. Bourell, Joseph J. Beaman,

Processing Challenges of Dual-Matrix Carbon Nanotube Aluminum Composites (Pages: 545-552)

A.M.K. Esawi, K. Morsi, I. Salama, H. Saleeb,

Influence of High Pressure Torsion on the Consolidation Behavior and Mechanical Properties of AA6061-SiCp Composite Powders (Pages: 553-560)

H.G. Salem, W.H. El-Garaihy, El-sayed M.A. Rassoul,

LASER Powder Deposition of AlMgBi₄-TiB₂ Ultra-Hard Coatings on Titanium and Steel Substrates (Pages: 561-568)

J. Fuerst, M. Carter, J. Sears,

Mechanical Properties of Spark Plasma Sintered ZrC-SiC Composites (Pages: 569-575)

Sumbule Sagdic, Ipek Akin, Filiz Sahin, Onuralp Yücel, Gultekin Goller,

Intense Pulsed Light Sintering Technique for Nanomaterials (Pages: 577-584)

H. A. Colorado, S. R. Dhage, J. M. Yang, H. T. Hahn,

Dependence of Tribology of Carbide Derived Carbon Films on Humidity (Pages: 585-594)

TMS, Marcin Tlustochowicz,

Structural and Optical Properties of Silicon Carbonitride Thin Films Deposited by Reactive DC Magnetron Sputtering (Pages: 595-602)

Okan Agirseven, Tolga Tavsanoglu, Esra Ozkan Zayim, Onuralp YUCEL,

Influence of TIG Re-Melting and RE (La₂O₃) Addition on Microstructure, Hardness and Wear of Ni-WC Composite Coating (Pages: 603-608)

B.M. Dhakar, D.K. Dwivedi, Satpal Sharma,

Evaluation of Mechanical Properties of Ni-Ti Bi-Layer Thin Film (Pages: 609-616)

Maryam Mohri, Mahmoud Nili-Ahmadabadi,

Anodic TiO₂ Nanotubular Arrays with Pre-Synthesized Hydroxyapatite - A Promising Approach to Enhance the Biocompatibility of Titanium (Pages: 617-624)

Lu-Ning Wang,

Preparation and Properties of Cu₂ZnSnS₄ Thin Films by Electrodeposition and Sulfurization (Pages: 625-632)

Chao An, Huimin Lu, Xi Chen,

Formation of Crystalline and Amorphous Phases During Deposition of Ni_xTi_1-x Thin Film on Si Substrate - Interpretation of Experimental Results Using Molecular Dynamics Simulations (Pages: 633-640)

S. Aich, B. Geetha Priyadarshini, M. Gupta, S. Ghosh, M. Chakraborty,

Doping and Co-Doping of Bandgap-Engineered ZnO Films for Solar Driven Hydrogen Production (Pages: 641-649)

Sudhakar Shet, Nuggehalli Ravindra, Yanfa Yan, Mowafak Al-Jassim,

Magnetic Field Assisted Heterogeneous Device Assembly (Pages: 651-661)

Vijay Kasisomayajula, Michael Booty, Anthony T. Fiory, Nuggehalli M. Ravindra,

Organic Thermal Mode Photoresists for Applications in Nano-Lithography (Pages: 663-668)

Hsiu-Wen Wu, Ming Chia Li, Chin-Tien Yang, Chung-Ta Cheng, Shuen-Chen Chen, Der-Ray Huang,

Nitrogen Doped ZnO (ZnO:N) Thin Films Deposited by Reactive RF Magnetron Sputtering for PEC Application (Pages: 669-676)

Sudhakar Shet, Kwang-Soon Ahn, Nuggehalli Ravindra, Yanfa Yan, Mowafak Al-Jassim,

Spin-Coated Erbium-Doped Silica Sol-Gel Films on Silicon (Pages: 677-684)

S. Abedrabbo, B. Lahlouh, S. Shet, A. T. Fiory, N. M. Ravindra,

Influence of Annealing on the Martensitic Transformation and Magnetocaloric Effect in Ni₄₉Mn₃₉Sn₁₂ Ribbons (Pages: 685-691)

Dianzhen Wu, Sichuang Xue, Wu Wang, Qijie Zhai, Hongxing Zheng,

Slow-Shot High Pressure Die-Casting (SS-HPDC) Process for AE44 Magnesium Single-Cylinder Engine Block with Short-Fiber Reinforcement in the Bore (Pages: 791-798)

Bin Hu, Pan Wang, Bob R. Powell, Xiaoqin Zeng,

Numerical Simulation of Pressure Infiltration Process for Making Metal Matrix Composites: Effect of Process Parameters (Pages: 823-830)

Bo Wang, Krishna M. Pillai,

Microstructural Evolution and Mechanical Properties of β-Titanium Ti-lOV-2Fe-3Al during Incremental Forming (Pages: 831-840)

S. Winter, S. Fritsch, M.F.-X. Wagner,

Study on Hot Deformation Behavior of TC4 Titanium Alloy (Pages: 841-848)

Yanling Lu, Sihai Jiao, Xinglai Zhou, Anping Dong,

Evolution of Microstructures and Properties of Ti-44Al-6V-3Nb-0.3Y Alloy after Forging and Rolling (Pages: 849-856)

Yuyong Chen, Hongzhi Niu, Shulong Xiao, Ping Sun, Changjiang Zhang,

Effect of Forging on Microstrutural Characteristic and Tensile Properties of In-Situ (TiB+TiC)/Ti Composite (Pages: 857-862)

Yuyong Chen, Changjiang Zhang, Shulong Xiao, Dezong Wu, Hongzhi Niu,

Microstructure and Mechanical Properties of Ti-6A1-4V Fabricated by Selective Laser Melting (Pages: 863-870)

Marco Simonelli, Yau Yau Tse, Christopher Tuck,

Computational Modeling of the Dissolution of Alloying Elements (Pages: 871-878)

Jun Ou, Aniruddha Chatterjee, Carl Reilly, Daan M. Maijer, Steve L. Cockcroft,

Cost Effective and Eco-Friendly Process for Preparation of Wrought Pure Ti Material via Direct Consolidation of TiH₂ Powders (Pages: 879-886)

Takanori Mimoto, Nozomi Nakanishi, Thotsaphon Threrujirapapong, Junko Umeda, Katsuyoshi Kondoh,

Effect of Dual-Laser Beam Welding on Microstructure Properties of Thin-Walled γ-TiAl Based Alloy Ti-45Al-5Nb-0.2C-0.2B (TNB) (Pages: 887-894)

Jie Liu, Volker Ventzke, Peter Staron, Heinz-Guenter Brokmeier, Michael Oehring, Nikolai Kashaev, Norbert Huber,

Residual Stress Relaxation Effects on the Cracking and Wear Processes of Shot Peened Ti-6A1-4V Titanium Alloy under Fretting-Fatigue Loading (Pages: 927-934)

R. Ferré, S. Fouvry, B. Berthel, R. Amargier, A. Ferré,

Interfacial Reactions in the Liquid/Solid and Liquid/Vapor Interfaces of Al-Si-Mg Alloys and B₁₂ (Bc₂) Substrates (Pages: 997-1004)

O.A. Herrera Romero, M. I. Pech Canul, Z. A. Chaudhury, G. Newaz,

Microstructure of α' Martensites in Ti-V-Al Alloys Studied by High-Resolution Transmission Electron Microscopy (Pages: 1005-1011)

K. Sato, H. Matsumoto, A. Chiba, T. J. Konno,

Free Access

Author Index (Pages: 1013-1017)

Free Access

Share

Supplemental Proceedings: Materials Processing and Interfaces

About this book

Author Bios

Table of Contents

Front Matter (Pages: i-xix)

Part I : Advances in Surface Engineering: Alloyed and Composite Coatings

Structural Coatings in Aluminum Alloy Microtruss Materials (Pages: 1-10)

Laser Cladding of High-Performance CPM Tool Steels on Hardened HI 3 Hot-Work Tool Steel for Automotive Tooling Applications (Pages: 11-18)

Electron Beam Deposited Multilayer Optical Interference Coatings Using Oxide Composites (Pages: 19-26)

Microstructure and Wear Properties of Laser In-situ Formation of TiBx and TiC Titanium Composite Coatings (Pages: 27-34)

Creep Behavior of Plasma Sprayed Y-PSZ Coated 6063-T6 Aluminum Alloy (Pages: 35-39)

Contribution of Ti Addition to the Electronic Structure and Adhesion at the Fe2Al5/Fe Interface in 55%A1-Zn Coating (Pages: 41-48)

The Roles of Diffusion Factors in Electrochemical Corrosion of TiN and CrN (CrSiCN) Coated Mild Steel and Stainless Steel (Pages: 49-56)

Effect of Electroplating Parameters on “HER” Current Density in Ni-MoS2 Composite Plating (Pages: 57-64)

Production of Ceramic Layers on Aluminum Alloys by Plasma Electrolytic Oxidation in Alkaline Silicate Electrolytes (Pages: 65-71)

Abrasive Wear Properties of Plasma Sprayed Y-PSZ Coated 6063-T6 Aluminum Alloy (Pages: 73-77)

The Electrochemical Behavior of Surgical Grade 316L S S with and without HA Coatings in Simulated Body Fluid (Pages: 79-86)

Modification Research on the Influence on Corrosion Film Properties of Pb-Ca-Sn Alloys of with Addition of Bi, Ag and Zn (Pages: 87-94)

Evaluation of Residual Stress in Fe2B Coating on Ductile Cast Iron (Pages: 95-100)

Part II : General Poster Session

Influence of Heat Treatment on the Corrosion of Steels in CCS Environment (Pages: 101-110)

Microstructure and Property Modifications in Mould Steels Treated by Pulsed Electron Beam (Pages: 111-118)

Potential Fiberboard Material from Cow Manure and Disposable Water Bottle (Pages: 119-123)

Influence of Process and Thermo-physical Parameters on. the Heat Transfer at Electron Beam Melting of Cu and Ta (Pages: 125-132)

Industrial Use of a New Ultrasound Spray for Cooling and Wet Gas Treatment in the Pyrometallurgical Processes (Pages: 133-140)

Development of 3D Porous Nickel Electrodes for Hydrogen Production (Pages: 141-148)

Electrochemical Recovery of Zinc Present in the Spent Pickling Baths Coming from Hot Dip Galvanizing Processes (Pages: 149-156)

Laboratory Testing Results of Kinetics and Processing Technology of the Polymetallic Sulphide Concentrate Blagojev Kamen - Serbia (Pages: 157-164)

Hidrotalcite with Gentamicine, of the Type Mg0.68Al0.32(OH)2 (NO3)0.32*0.1H2O, Formed by Chemical Coprecipitation in Controlled Atmosphere (Pages: 165-172)

Effect of Thiodiglycolamide Addition to Di-n-hexyl Sulfide on the Pd(II) Extraction Rate (Pages: 173-177)

Synthesis and Characterization of Metallic Oxides (Pages: 179-186)

Fabrication of Lotus-Type Porous Copper by Centrifugal Casting Technique (Pages: 187-189)

Effects of Pulsed Magnetic Annealing on the Grain Boundary of Primary Recrystallized Microstructure in the Grain-Oriented Silicon Steel (Pages: 191-198)

Relationship between Heat Input and Microstructure and Mechanical Properties of Laser Beam Welded Superalloy Inconel 718 (Pages: 199-205)

Experimental Study on the Behavior of Slag Entrapment and Inclusion Removal in 441 Ladle with Argon Blowing (Pages: 207-213)

The Effect of High Superheat on the Solidification Structure and Carbon Segregation of Ferrite-Based Alloy (Pages: 215-221)

Refinement of Ligaments of Nanoporous Ag Ribbons by Controlling the Surface Diffusion of Ag (Pages: 223-230)

Thermal Analysis of the Composition of Poly(Acrylic AcidyCarboxymethylstarch Used as a Polymeric Binder (Pages: 231-238)

Part III : Mechanical Behavior Related to Interface Physics

Interfacial Strength of Al/Zr/DU-10%wtMo Subject to Different Loading Modes (Pages: 239-248)

Uniaxial Tension of Friction-Welded 304-Stainless Steel and 6061 Aluminum (Pages: 249-256)

Ultra Fast Grain Boundary Segregation In Hot Deformed Nickel (Pages: 257-264)

Quantitative NanoSIMS Analysis of Grain Boundary Segregation in Bulk Samples (Pages: 265-271)

The Periodic Unit of Doubly-diffracted Reflections from Periodic Grain Boundaries in Cubic Crystals and Its Relationship with Coincident Site Lattice (Pages: 273-280)

The In-situ Intrinsic Stress Measurements of Cu and Al Thin Films (Pages: 281-288)

Delamination Characterization of Bonded Interface Using Surface Based Cohesive Model (Pages: 289-296)

Part IV : Nanocomposites

Compressive Strength of Epoxy- Graphite Nanoplatelets Composites (Pages: 297-306)

Micromechanical Analysis of Influences of Agglomerated Nanotube Interphase on Effective Material Properties of a Three Phase Piezoelectric Nanocomposite (Pages: 307-312)

Effect of Nano-Paper Coating on Flexural Properties of a Fire-Treated Glass Fiber-Reinforced Polyester Composite (Pages: 313-320)

Finite Element Modeling of the Nanoscratching of Polymer Surfaces (Pages: 321-328)

Manufacturing and Characterization of an Auxetic Composite (Pages: 329-336)

Microtruss Cellular Nanocomposites (Pages: 337-344)

Synthesis of Tailored Core-Shell Magnetic Microparticles for Intravascular Embolization (Pages: 345-352)

Dramatic Expansion of Luminescence Region in GaP/Polymer Nanocomposites (Pages: 353-359)

Positron Lifetime Analysis of Polyurea-Nanoclay Composites (Pages: 361-365)

Rheological Properties of Suspensions of Nanopowders Yttrium Oxide (Y2O3) and Magnesium-Aluminum Spinel (MgAl2O4) (Pages: 367-374)

Thermal Properties of Hemp-High Density Polyethylene Composites: Effect of Two Different Chemical Treatments (Pages: 375-382)

Discarded Ultrafine Particulate Carbonaceous Materials Used as Reinforcers of Rubber Vulcanized Products (Pages: 383-388)

Properties of Additional Reinforcers Materials Used to Complement NAOB - A Rubber/Organoclay Nanocomposite Material (Pages: 389-394)

Thermal Properties of Carbon Nano Tubes Reinforced Mg-Matrix Nanocomposites (Pages: 395-402)

Part V : New Advances in Synthesis, Characterization, and Application of Layered Double Hydroxides

Designing Layered Double Hydroxides for Targeted Applications (Pages: 403-412)

Electrochemical Synthesis of Layer Double Hydroxides, Its Characterization, and Performance Study for Removal of Nitrate and Arsenic (Pages: 413-420)

Removal of Direct Red and Orange II Azo Dye from Synthetic Textile Water Using Electrochemically Produced Fe-LDH (Pages: 421-428)

Removal of Arsenic Using Green Rust and Other Electrochemically Generated Floe (Pages: 429-436)

Formation of Layered Double Hydroxides in Self-Purification of Polynary Metal Electroplating Wastewaters for Effective Removal of Anionic Dye (Pages: 437-444)

Characterization and Chemical Modification of Electrochemically Produced Layered Double Hydroxides as Nanomaterials (Pages: 445-452)

A Review on Alloying in Tungsten Heavy Alloys (Pages: 453-465)

Part VI : Randall M. German Honorary Symposium on Sintering and Powder-Based Materials

Low-Thermal Load Consolidation of Sm-Fe-N Flake Powder by Combination of Cyclic Compression and Current Sintering (Pages: 467-473)

Fabrication of TiN/Fe-Al Cermet from Mixture of TiN, Fe and Al Powders (Pages: 475-479)

Transparent Polycrystalline Alumina Obtained by SPS: Single and Double Doping Effect (Pages: 481-487)

Sintering of Nanocrystalline Tungsten Powder (Pages: 489-496)

Effect of Powder Synthesis and Processing on Luminescence Properties (Pages: 497-504)

Effect of Rapid Solidification and Heat Treatment on D2 Tool Steel (Pages: 505-512)

Development of Solid Freeform Fabrication for Metallic Parts Using Selective Inhibition of Sintering (Pages: 513-520)

Numerical Simulation of Cold Pressing of Armstrong CP-Ti Powders (Pages: 521-528)

The Effect of Coke Particle Size on the Thermal Profile of the Sintering Process Product (Pages: 529-536)

Contribution of Ti Addition to the Electronic Structure and Adhesion at the Fe₂Al₅/Fe Interface in 55%A1-Zn Coating (Pages: 41-48)

Effect of Electroplating Parameters on “HER” Current Density in Ni-MoS₂ Composite Plating (Pages: 57-64)

Evaluation of Residual Stress in Fe₂B Coating on Ductile Cast Iron (Pages: 95-100)

Hidrotalcite with Gentamicine, of the Type Mg_0.68Al_0.32(OH)₂ (NO₃)_0.32*0.1H₂O, Formed by Chemical Coprecipitation in Controlled Atmosphere (Pages: 165-172)

Rheological Properties of Suspensions of Nanopowders Yttrium Oxide (Y₂O₃) and Magnesium-Aluminum Spinel (MgAl₂O₄) (Pages: 367-374)

LASER Powder Deposition of AlMgBi₄-TiB₂ Ultra-Hard Coatings on Titanium and Steel Substrates (Pages: 561-568)

Influence of TIG Re-Melting and RE (La₂O₃) Addition on Microstructure, Hardness and Wear of Ni-WC Composite Coating (Pages: 603-608)

Anodic TiO₂ Nanotubular Arrays with Pre-Synthesized Hydroxyapatite - A Promising Approach to Enhance the Biocompatibility of Titanium (Pages: 617-624)

Preparation and Properties of Cu₂ZnSnS₄ Thin Films by Electrodeposition and Sulfurization (Pages: 625-632)

Formation of Crystalline and Amorphous Phases During Deposition of Ni_xTi_1-x Thin Film on Si Substrate - Interpretation of Experimental Results Using Molecular Dynamics Simulations (Pages: 633-640)

Influence of Annealing on the Martensitic Transformation and Magnetocaloric Effect in Ni₄₉Mn₃₉Sn₁₂ Ribbons (Pages: 685-691)

In Situ Composite of (Mg₂Si)/Al Fabricated by Squeeze Casting (Pages: 775-781)

Optimization of Tensile Strength of Friction Stir Welded Al-(10 tol4 wt.%) TiB₂ Metal Matrix Composites (Pages: 783-790)

Compressive Properties of Al-B₄C Composites over the Temperature Range of 25 - 500°C (Pages: 799-806)

Cost Effective and Eco-Friendly Process for Preparation of Wrought Pure Ti Material via Direct Consolidation of TiH₂ Powders (Pages: 879-886)

Deformation Mechanism in Nanoindentation of Ti_63.375Fe_34.125Sn_2.5 Alloy (Pages: 971-977)

Study on Wettability of Cu and 85Cu-15Ni Alloy on 18NiO-NiFe₂O₄ Composite Ceramics (Pages: 989-996)

Interfacial Reactions in the Liquid/Solid and Liquid/Vapor Interfaces of Al-Si-Mg Alloys and B₁₂ (Bc₂) Substrates (Pages: 997-1004)