Production of Cast AZ91-CNT Nano-Composite by Addition of Ni-P-CNT Coated Magnesium Powder to the Melt
Mahan Firoozbakht,
Behzad Niroumand,
Sayed Mahmoud Monirvaghefi,
Mahan Firoozbakht
Search for more papers by this authorBehzad Niroumand
Search for more papers by this authorSayed Mahmoud Monirvaghefi
Search for more papers by this authorMahan Firoozbakht,
Behzad Niroumand,
Sayed Mahmoud Monirvaghefi,
Mahan Firoozbakht
Search for more papers by this authorBehzad Niroumand
Search for more papers by this authorSayed Mahmoud Monirvaghefi
Search for more papers by this authorBook Editor(s): TMS,
First published: 17 March 2012
Summary
This chapter contains sections titled:
-
Introduction
-
Experimental Procedure
-
Results and Discussion
-
Conclusions
References
- T. Honma, K. Nagai, A. Katou, K. Arai, M. Suganuma, S. Kamado, “Synthesis of high-strength magnesium alloy composites reinforced with Si-coated carbon nanofibers” Scripta Materialia, 60 (2009), 451–454.
- Z.H. Xiao, J.R. Luo, S.S. Wu, D.N. Li, Y.W. Mao, X.J. Song, “Study on a semi-solid rheo-diecasting process with AZ91D alloy slurry” Journal of Materials Engineering and Performance, 13 (2004), 60–63.
- C.S. Goh, J. Wei, L.C. Lee, M. Gupta, “Ductility improvement and fatigue studies in Mg-CNT nanocomposites” Composites Science and Technology, 68 (2008), 1432–1439.
- S.K. Thakur, T.S. Srivatsan, M. Gupta, “Synthesis and mechanical behavior of carbon nanotube-magnesium composites hybridized with nanoparticles of alumina” Materials Science and Engineering A, 466 (2007), 32–37.
- C.S. Goh, J. Wei, L.C. Lee, M. Gupta, “Simultaneous enhancement in strength and ductility by reinforceing magnesium with carbon nanotubes” Materials Science and Engineering A, 423 (2006), 153–156.
- C.S. Goh, J. Wei, L.C. Lee, M. Gupta, “Development of novel carbon nanotubes reinforced magnesium nanocomposites using powder metallurgy techniques” SIMTech technical reports, 9 (2008), 130–135.
- S.F. Hassan, M. Gupta, “Development of ductile magnesium composite materials using titanium as reinforcement” Journal of Alloys and Compounds, 345 (2002), 246–251.
- M.A. Thein, L. Lu, M.O. Lai, Effect of milling and reinforcement on mechanical properties of nanostructured magnesium composite”, Journal of Materials Processing Technology, 209 (2009), 4439–4443.
- Q. Li, A. Viereckl, C.A. Rottmair, R.F. Singer, “Improved processing of carbon nanotube/magnesium alloy compsoites” Composites Sience and Technology, 69 (2009), 1193–1199.
- X. Zeng, G. Zhou, Q. Xu, Y. Xiong, C. Luo, J. Wu, “A new technique for dispersion of carbon nanotubes in a metal melt” Materials Science and Engineering A, 527 (2010) 5335–5340.
- A. Esawi, K. Morsi, “Dispersion of carbon nanotubes (CNTs) in aluminum powder” Composites: Part A, 38 (2007), 646–650.
- I. Bright, V. Koutsos, Q. Li, R. Cheung, “Carbon nanotubes for integration into nanocomposite materials” Microelectronic Engineering, 83 (2006), 1542–1546.
- L. Shi-ying, G. Fei-peng, Z. Qiong-yuan, Z. Xue, L. Wen-Zhent, “Fabrication of carbon nanotubes reinforced AZ91D composites by ultrasonic processing” Transactions of Nonferrous Metals Society of China, 20 (2010), 1222–1227.
- K. Kondoh, H. Fukuda, J. Umeda, H. Imai, B. Fugetsu, M. Endo, “Microstructural and mechanical analysis of carbon nanotube reinforced magnesium alloy powder composites” Materials Science and Engineering A, 527 (2010), 4103–4108.
- H. Uozumi, K. Kobayashi, K. Nakanishi, T. Matsunaga, K. Shinozki, H. Sakamoto, T. Tsukada, C. Masuda, M. Yoshida, “Fabrication process of carbon nanotube/light metal matrix composites by squeeze casting” Materials Science and Engineering A, 495 (2005) 282–287.
- E. Carreño-Morelli, J. Yang, E. Couteau, K. Hernadi, J.W. Seo, C. Bonjour, L. Forró, R. Schaller, “Tiny tubes boost for metal matrix composites” Physica Status Solidi (a), 201 (2004), R53–R55.
- Y. Shimizu, S. Miki, T. Soga, I. Itoh, H. Todoroki, T. Hosono, K. Sakaki, T. Hayashi, Y.A. Kim, M. Endo, S. Morimoto, A. Koide, “Multi-walled carbon nanotube-reinforced magnesium alloy composites” Scripta Materialia, 58 (2008), 267–270.
- B. Abbasipour, B. Niroumand, S.M. Monir Vaghefi, “Compocasting of A356-CNT composite” Transaction Nonferrous Metals Society of China, 20 (2010), 1561–1566.
- Z. Yang, H. Xu, M.K. Li, Y.L. Shi, Y. Huang, H.L. Li, “Preparation and properties of Ni/P/single-walled carbon nanotubes composite coatings by means of electroless plating” Thin Solid Films, 466 (2004), 86–91.
- C.S. Chen, X.H. Chen, Z. Yang, W.H. Li, L.S. Xu, B. Yi, “Effect of multi-walled carbon nanotubes as reinforcement fibers on tribological behavior of Ni-P electroless coating” Diamond Related Materials, 15 (2006), 151–156.
- Y.T. Wu, L. Lei, B. Shen, W.B. Hu, “Investigation in electroless Ni-P-Cg(graphite)-SiC composite coating” Surface Coating Technology, 201 (2006), 441–445.
- M. Firoozbakht, S.M. Monirvaghefi, B. Niroumand, “Electroless composite coating of Ni-P-Carbon nanotubes on magnesium powder” Journal of Alloys and Compounds, 509S (2011), S496–S502.
- 18071 Electroless Nickel SLOTONIP 70 A.pdf, www.schloetter.de/en/processes/18-electroless-nickel/electroless-nickel/ (Last visited on 26.06.2010).
-
J. Topping,
Errors of Observation and their Treatment,
4th ed. (Chapman & Hall,
1972).
10.1007/978-94-011-6928-8 Google Scholar
