Delamination Characterization of Bonded Interface Using Surface Based Cohesive Model

ABAQUS, ABAQUS Version 6.9-1 Documentation, ABAQUS, Inc, 2009.
Google Scholar
X-P Xu, A. Needleman, “Void nucleation by inclusion debonding in a crystal matrix,” Modeling and Simulation in Materials Science and Engineering, 1 (1993), 111–132.
10.1088/0965-0393/1/2/001
Web of Science® Google Scholar
G. Alfano, “On the influence of the shape of the interface law on the application of cohesive-zone models,” Composites science and technology, 66 (2006), 723–730.
10.1016/j.compscitech.2004.12.024
Web of Science® Google Scholar
K. Song, C.G. Davila, C.A. Rose, “Guidelines and parameter selection for the simulation of progressive delamination,” (Paper presented at the ABAQUS Users’ Conference, Newport, RI, 2008).
Google Scholar
M.J. Van den Bosch, P.J.G. Schreurs, M.G.D. Geers, “On the prediction of delamination during deep-drawing of polymer coated metal sheet,” Journal of Materials Processing Technology, 209 (2009), 297–302.
10.1016/j.jmatprotec.2008.02.024
CAS Web of Science® Google Scholar
G. Alfano, M.A. Crisfield, “Finite element interface models for the delamination analysis of laminated composites: mechanical and computational issues,” Intl Journal for Numerical Methods in Engineering, 50 (2001), 1701–1736.
10.1002/nme.93
Web of Science® Google Scholar
A. Turon, C.G. Davila, P.P. Camanho, and J. Coasta, “An engineering solution for mesh size effects in the simulation of delamination using cohesive zone models,” Engineering Fracture Mechanics, 74 (2007), 1665–1682.
10.1016/j.engfracmech.2006.08.025
Web of Science® Google Scholar
J.G. Williams, H. Hadavinia, A.J. Kinloch, “Cohesive zone models in the characterization of toughness,” (Paper presented at the 11th International Conference on Fracture ICF11, Turin, Italy, March, 2005).
Google Scholar
V. Gupta, A.S. Argon, D.M. Parks, J.A. Cornie, “Measurement of interface strength by laser spallation technique,” Journal of the Mechanics and Plastics of Solids, 40 (1992), 141–180.
10.1016/0022-5096(92)90296-E
CAS Web of Science® Google Scholar
T. Diehl, “On using a penalty-based cohesive-zone finite element approach, Part I: Elastic solution benchmarks,” International Journal of Adhesion & Adhesives, 28 (2008), 237–255.
10.1016/j.ijadhadh.2007.06.003
CAS Web of Science® Google Scholar
T. Diehl, “On using a penalty-based cohesive-zone finite element approach, Part II: Inelastic peeling of an epoxy-bonded aluminum strip,” International Journal of Adhesion & Adhesives, 28 (2008), 256–265.
10.1016/j.ijadhadh.2007.06.004
CAS Web of Science® Google Scholar
I. Georgiou, H. Hadavinia, A. Ivankovic, A.J. Kinloch, V. Trospa, J.G. Williams, “Cohesive zone models and the plastically deforming peel test” The Journal of Adhesion, 79 (2003), 239–265.
10.1080/00218460309555
CAS Web of Science® Google Scholar
D.R. Moore, J.G. Williams, “A protocol for determination of the adhesive fracture toughness of flexible laminates by peel testing: fixed arm and t-peel methods,” (An ESIS Protocol, Revised June 2007, Nov 2010, http://www3.imperial.ac.uk/meadhesion/testprotocols/).
Google Scholar
A.J. Kinloch, C.C. Lau, and J.G. Williams, ICPeel 2006, “G_c Analysis for peel testing of Adhesives,” (Excel computer program, Imperial college, London, http://www.imperial.ac.uk/me/).
Google Scholar
H.F. Zhao, Wei, Yueguang, “Determination of interface properties between micron-thick metal film and ceramic substrate using peel test,” International Journal of Fracture, 144 (2007), 103–112.
10.1007/s10704-007-9083-4
CAS Web of Science® Google Scholar
H.F Zhao, M. Chen, Y. Jin, “Determination of interfacial properties between metal film and ceramic substrate with an adhesive layer,” Materials and Design, 30 (2009), 154–159.
10.1016/j.matdes.2008.04.035
CAS Web of Science® Google Scholar
O. Van der Sluis, P.H.M. Timmermans, E.J.L. Van der Zanden, J.P.M. Hoefnagels, “Analysis of the three-dimensional delamination behavior of stretchable electronics applications,” Key Engineering Materials, 417-418 (2010), 9–12.
10.4028/www.scientific.net/KEM.417-418.9
Web of Science® Google Scholar
Laura De Lorenzis, Giorgio Zavarise, “Modeling of mixed-mode debonding in the peel test applied to superficial reinforcements,” International Journal of Solids and Structures, 45 (2008), 5419–5436.
10.1016/j.ijsolstr.2008.05.024
Web of Science® Google Scholar
M.J. Van den Bosch, P.J.G. Schreurs, M.G.D. Geers, “Identification and characterization of delamination in polymer coated metal sheet,” Journal of the Mechanics and Physics of Solids, 56 (2008), 3259–3276.
10.1016/j.jmps.2008.07.006
CAS Web of Science® Google Scholar
ASTM E8/E8M - 09, “Standard test methods for tension testing of metallic materials,” ASTM International, West Conshohocken, PA, United states, 2009.
Google Scholar
ASTM D-882:2009, “Standard test method for tensile properties of thin plastic sheeting,” ASTM International, West Conshohocken, PA, United states, 2009.
Google Scholar
ISO 8510-1, “Adhesives - Peel test for a flexible-bonded-to-rigid test specimen assembly -Part 1: 90 degree peel”.
Google Scholar

Citing Literature

Supplemental Proceedings: Materials Processing and Interfaces, Volume 1

Delamination Characterization of Bonded Interface Using Surface Based Cohesive Model

Summary

References

Citing Literature

References

Information

About Wiley Online Library

Help & Support

Opportunities

Connect with Wiley

Delamination Characterization of Bonded Interface Using Surface Based Cohesive Model

Summary

References

Citing Literature

References

Related

Information