Evolution of Microstructures and Properties of Ti-44Al-6V-3Nb-0.3Y Alloy after Forging and Rolling
Yuyong Chen,
Hongzhi Niu,
Shulong Xiao,
Ping Sun, Changjiang Zhang,
Yuyong Chen
Search for more papers by this authorHongzhi Niu
Search for more papers by this authorShulong Xiao
Search for more papers by this authorChangjiang Zhang
Search for more papers by this authorYuyong Chen,
Hongzhi Niu,
Shulong Xiao,
Ping Sun, Changjiang Zhang,
Yuyong Chen
Search for more papers by this authorHongzhi Niu
Search for more papers by this authorShulong Xiao
Search for more papers by this authorChangjiang Zhang
Search for more papers by this authorBook Editor(s): TMS,
First published: 17 March 2012
Summary
This chapter contains sections titled:
-
Introduction
-
Experimental procedure
-
Results and Discussion
-
Conclusions
References
-
Y.W. Kim,
“Effects of microstructure on the deformation and fracture of γ-TiAl alloys,”
Mater Sci Eng A,
192/193
(1995),
519–533.
10.1016/0921-5093(94)03271-8 Google Scholar
- X.H. Wu, “Review of alloy and process development of TiAl alloys,” Intermetallics, 14 (2006), 1114–1122.
- Y.W. Kim, “Gamma titanium aluminides: their status and future,” JOM, 47 (1995), 39–41.
- Y.W. Kim, “Wrought TiAl alloy design,” Trans Nonferrous Met Soc China, 9 (suppl.1) (1999), 298–308.
- R.W. Imayev, V.W. Imayev, M. Oehring, F. Appel, “Alloy design concepts for refined gamma titanium aluminide based alloys,” Intermetallics, 15 (2007), 451–460.
- H. Clemens, A. Bartels, S. Bystrzanowski, H. Chladil, H. Leitner. “Grain refinement in γ-TiAl-based alloys by solid state phase transformations,” Intermetallics, 14 (2006), 1380–1385.
- T. Tetsui, K. Shindo, S. Kobayashi, M. Takeyama, “Strengthening a high-strength TiAl alloy by hot-forging,” Intermetallics, 11 (2003), 299–306.
- T. Tetsui, K. Shindo, S. Kaji, S. Kobayashi and M. Takeyama, “Fabrication of TiAl components by means of hot forging and machining,” Intermetallics, 13 (2005), 971–978.
- S.L. Draper, D. Krause, B. Lerch, I.E. Locci, B. Doehnert, “Development and evaluation of TiAl sheet structures for hypersonic applications,” Mater Sci Eng A, 464 (2007), 330–342.
- T. Carneiro, Y.W. Kim, “Evaluation of ingots and alpha-extrusions of gamma alloys based on Ti-45Al-6Nb,” Intermetallics, 13 (2005), 1000–1007.
- G. Das, H. Kestler, H. Clemens, P.A. Bartolotta, “Sheet gamma TiAl: Status and opportunities,” JOM, 56 (2004), 42–45.
- H. Lemens, H. Kestler, “Processing and applications of intermetallic γ-TiAl-based alloys,” Adv Eng Mater, 2 (2000), 551–570.
- H. Clemens, H. Kestler, N. Eberhardt and W. Knabl. In: YW Kim, D Dimiduk, M Loretto, editors. Gamma titanium aluminides. Warrendale, PA, USA: TMS; 1999. p. 209–223.
- M. Takeyama, S. Kobayashi, “Physical metallurgy for wrought gamma titanium aluminides: Microstructure control through phase transformations,” Intermetallics, 13 (2005), 993–999.
- R. Kainuma, Y. Fujita, H. Mitsui, I. Ohnuma, K. Ishida, “Phase equilibria among α (hep), β (bcc) and γ (L10) phases in Ti-Al base ternary alloys,” Intermetallics, 8 (2000), 855–867.
- S.L. Semiatin, B.W. Shanahan, F. Meisenkothen, “Hot rolling of gamma titanium aluminide foil,” Acta Mater, 58 (2010), 4446–4457.
- X.J. Xu, J.P. Lin, Y.L. Wang, J.F. Gao, L. Lin and G.L. Chen, “Effect of forging on microstructure and tensile properties of Ti-45Al-(8-9)Nb-(W, B, Y) alloy,” J Alloys Compd, 414 (2006), 175–180.
- C.T. Liu, J.H. Schneibel, P.J. Maziasz, J.L. Wright, D.S. Easton, “Tensile properties and fracture toughness of TiAl alloys with controlled microstructures,” Intermetallics, 4 (1996), 429–440.
- G.X. Cao, L.F. Fu, J.G. Lin, “Relationships of microstructure and properties of a fully lamellar TiAl alloy,” Intermetallics, 8 (2000), 647–653.
- J.G. Wang, T.G. Nieh, “Creep of a beta phase-containing TiAl alloy,” Intermetallics, 8 (2000), 737–748.
- F.R.N. Nabarro, Dislocations in Solids (Elsevier, Amsterdam, 1996), vol. 10.
- B.A. Grinberg, M.A. Ivanov, “Intermetallic compounds Ni3Al and TiAl: Microstructure and Deformation Behavior,” Ural Division of the Russian Academy of Sciences, Yekaterinburg, 2002(in Russian).
- R.T. Zheng, Y.G. Zhang, C.Q. Chen, G.A. Cheng, “The ambient temperature tensile behavior of duplex γ-TiAl-based alloys,” Mater Sci Eng A, 362 (2003), 192–199.
- F. Appel, R. Wagner, “Microstructure and deformation of two-phase γ-titanium aluminides,” Mater Sci Eng R, 22 (1998), 187–268.
