Uniform Dispersion of Nanoparticles in Metal Matrix Nanocomposites
L.Y. Chen, H. Choi, A. Fehrenbacher,
J.Q. Xu, C. Ma, X.C. Li,
A. Fehrenbacher
Search for more papers by this authorL.Y. Chen, H. Choi, A. Fehrenbacher,
J.Q. Xu, C. Ma, X.C. Li,
A. Fehrenbacher
Search for more papers by this authorBook Editor(s): TMS,
Summary
This chapter contains sections titled:
-
Introduction
-
Materials and Methods
-
Results and Discussion
-
Conclusions
-
Acknowledgments
References
- I.A. Ibrahim, F.A. Mohamed, and E.J. Lavernia, “Particulate Reinforced Metal Matrix Composites - A Review,” Journal of Materials Science, 26 (1991), 1137–1156.
- A. Kelly, “Composites in Context,” Composites Science and Technology, 23 (1985), 171–199.
- A. Mortensen and I. Jin, “Solidification Processing of Metal Matrix Composites,” International Materials Reviews, 37 (1992), 101–128.
- A. Mortensen and J. Llorca, “Metal Matrix Composites,” Annual Review of Materials Research, 40 (2010), 243–270.
- S.C. Tjong, “Novel nanoparticle-reinforced metal matrix composites with enhanced mechanical properties,” Advanced Engineering Materials, 9 (2007), 639–652.
- S.C. Tjong and Z.Y. Ma, “Microstructural and mechanical characteristics of in situ metal matrix composites,” Materials Science & Engineering R-Reports, 29 (2000), 49–113.
- D.J. Lloyd, “Particle-Reinforced Aluminum and Magnesium Matrix Composites,” International Materials Reviews, 39 (1994), 1–23.
- D.J. Lloyd, “Aspects of Fracture in Particulate Reinforced Metal Matrix Composites,” Acta Metallurgica Et Materialia, 39 (1991), 59–71.
- H.J. Gao, B.H. Ji, I.L. Jager, E. Arzt, and P. Fratzl, “Materials become insensitive to flaws at nanoscale: Lessons from nature,” Proceedings of the National Academy of Sciences of the United States of America, 100 (2003), 5597–5600.
- Z. Zhang and D.L. Chen, “Consideration of Orowan strengthening effect in particulate-reinforced metal matrix nanocomposites: A model for predicting their yield strength,” Scripta Materialia, 54 (2006), 1321–1326.
- K.S. Tun and M. Gupta, “Improving mechanical properties of magnesium using nano-yttria reinforcement and microwave assisted powder metallurgy method,” Composites Science and Technology, 67 (2007), 2657–2664.
- S. Valdez, B. Campillo, R. Perez, L. Martinez, and A. Garcia, “Synthesis and microstructural characterization of Al-Mg alloy-SiC particle composite,” Materials Letters, 62 (2008), 2623–2625.
- M. Goken and H.W. Hoppel, “Tailoring Nanostructured, Graded, and Particle-Reinforced Al Laminates by Accumulative Roll Bonding,” Advanced Materials, 23 (2011), 2663–2668.
- X.C. Li, Y. Yang, and X.D. Cheng, “Ultrasonic-assisted fabrication of metal matrix nanocomposites,” Journal of Materials Science, 39 (2004), 3211–3212.
- Y. Yang, J. Lan, and X.C. Li, “Study on bulk aluminum matrix nano-composite fabricated by ultrasonic dispersion of nano-sized SiC particles in molten aluminum alloy,” Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 380 (2004), 378–383.
- Y.M. Youssef, R.J. Dashwood, and P.D. Lee, “Effect of clustering on particle pushing and solidification behaviour in TiB2 reinforced aluminium PMMCs,” Composites Part A-Applied Science and Manufacturing, 36 (2005), 747–763.
- R.S. Mishra and Z.Y. Ma, “Friction stir welding and processing,” Materials Science & Engineering R-Reports, 50 (2005), 1–78.
- Z.Y. Ma, “Friction stir processing technology: A review,” Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science, 39A (2008), 642–658.
- R.S. Mishra, Z.Y. Ma, and I. Charit, “Friction stir processing: a novel technique for fabrication of surface composite,” Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing, 341 (2003), 307–310.
- Y. Morisada, H. Fujii, T. Nagaoka, and M. Fukusumi, “MWCNTs/AZ31 surface composites fabricated by friction stir processing,” Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 419 (2006), 344–348.
- H. Choi, M. Jones, H. Konishi, and X.C. Li, “Effect of combined addition of Cu and aluminum oxide nanoparticles on mechanical properties and microstructure of Al-7Si-0.3Mg alloy,” Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science, DOI: 10.1007/s11661-011-0905-7 (2011).
