Microstructure and Wear Properties of Laser In‐situ Formation of TiBx and TiC Titanium Composite Coatings - Supplemental Proceedings - Wiley Online Library

B. J. Kooi, Y. T. Pei, and J Th M. Hosson, “The Evolution of microstructure in a laser clad TiB-Ti composite coating”. Acta Materialia, 2003, 51: 831–845.
10.1016/S1359-6454(02)00475-5
CAS Web of Science® Google Scholar
Y. T. Pei, V. Ocelik, and J Th M. Hosson, “SiCp/Ti6Al4v functionally graded materials produced by laser melt injection”. Acta Materialia, 2000, 50: 2035–2051.
10.1016/S1359-6454(02)00049-6
Web of Science® Google Scholar
J. A. Vreeling et al., “Ti-6Al-4V strengthened by laser melt injection of WC_p”. Acta Materrialia, 2002, 50: 4913–4924.
10.1016/S1359-6454(02)00366-X
CAS Web of Science® Google Scholar
V. Ocelik, D. Matthews, and J Th M. Hosson, “Sliding wear resistance of metal matrix composite layer prepared by high power laser”. Surface and Coating Technology, 2005, 197 (2–3): 303–315.
10.1016/j.surfcoat.2004.09.003
CAS Web of Science® Google Scholar
R. Banerjee et al., “Direct laser deposition of in situ Ti-6Al-4V-TiB composites”. Material Science Engineering, 2003, A358: 343–349.
10.1016/S0921-5093(03)00299-5
CAS Web of Science® Google Scholar
F. Wang, J. Mei, and X. Wu, “Direct laser fabrication of Ti6Al4V/TiB”. Materials Processing Technology. 2008, 195: 321–326.
10.1016/j.jmatprotec.2007.05.024
CAS Web of Science® Google Scholar
F. Wang et al., “Laser fabrication of Ti6Al4V/TiC composites using simultaneous powder and wire feed”. Material Science Engineering 2007, A445–446: 461–466.
10.1016/j.msea.2006.09.093
CAS Web of Science® Google Scholar
D Liu, S.Q. Zhang, A. Li, H.M. Wang. Alloy Compound 2009, Vol. 485: 156–162.
10.1016/j.jallcom.2009.05.112
CAS Web of Science® Google Scholar
D Liu, S.Q. Zhang, A. Li, H.M. Wang. Materials and Design, 2010, Vol. 31: 3127–3133.
10.1016/j.matdes.2009.12.036
CAS Web of Science® Google Scholar
H. Tian et al., “Microstructure of laser cladding B₄C and B₄C+Ti coatings on TC4 alloys”. Rare Metal Materials and Engineering, 2007, 36 (3): 420–423.
CAS Web of Science® Google Scholar
Y. J. Liang et al., “Laser cladding deposition on in-situ formation of titanium composite materials”. Nonferrous Metals, 2008, 60: 25–28.
CAS Google Scholar
X.T. Yu and H. M. Wang, “Microstructure of laser melting deposited (TiB+TiC)/TAl5 titanium matrix composite bar”. Aerospace material and technology, 2007, 6: 116–119 (in Chinese).
Google Scholar
X.T. Yu and H. M. Wang, “Microstructure and mechanical properties of laser melting deposited (TiB+TiC)/TAl5 in situ titanium matrix composites”. Acta Materiae Compositae Sinica, 2008, 25: 113–118 (in Chinese).
CAS Web of Science® Google Scholar
W. J. Lu et al., “Solidification paths and reinforcement morphologies in melt-processed (TiB+TiC)/Ti in situ composites”. Metall. Mater. Trans A, 2002, 33: 3055–3066.
10.1007/s11661-002-0290-3
Web of Science® Google Scholar

Supplemental Proceedings: Materials Processing and Interfaces, Volume 1

Microstructure and Wear Properties of Laser In-situ Formation of TiBx and TiC Titanium Composite Coatings

Summary

References

References

Information

About Wiley Online Library

Help & Support

Opportunities

Connect with Wiley

Microstructure and Wear Properties of Laser In-situ Formation of TiBx and TiC Titanium Composite Coatings

Summary

References

References

Related

Information