Fracture Behaviors of TiN and TiN/Ti Multilayer Coatings on Ti Substrate during Nanoindentation
Yong Sun
Faculty of Engineering, University of Wollongong, Northfields Avenue, Wollongong, NSW2522, Australia
Search for more papers by this authorCheng Lu
Faculty of Engineering, University of Wollongong, Northfields Avenue, Wollongong, NSW2522, Australia
Search for more papers by this authorA. Kiet Tieu
Faculty of Engineering, University of Wollongong, Northfields Avenue, Wollongong, NSW2522, Australia
Search for more papers by this authorYue Zhao
Faculty of Engineering, University of Wollongong, Northfields Avenue, Wollongong, NSW2522, Australia
Search for more papers by this authorHongtao Zhu
Faculty of Engineering, University of Wollongong, Northfields Avenue, Wollongong, NSW2522, Australia
Search for more papers by this authorKuiyu Cheng
Faculty of Engineering, University of Wollongong, Northfields Avenue, Wollongong, NSW2522, Australia
Search for more papers by this authorCharlie Kong
Electron Microscope Unit, The University of New South Wales, Sydney, NSW 2052, Australia
Search for more papers by this authorYong Sun
Faculty of Engineering, University of Wollongong, Northfields Avenue, Wollongong, NSW2522, Australia
Search for more papers by this authorCheng Lu
Faculty of Engineering, University of Wollongong, Northfields Avenue, Wollongong, NSW2522, Australia
Search for more papers by this authorA. Kiet Tieu
Faculty of Engineering, University of Wollongong, Northfields Avenue, Wollongong, NSW2522, Australia
Search for more papers by this authorYue Zhao
Faculty of Engineering, University of Wollongong, Northfields Avenue, Wollongong, NSW2522, Australia
Search for more papers by this authorHongtao Zhu
Faculty of Engineering, University of Wollongong, Northfields Avenue, Wollongong, NSW2522, Australia
Search for more papers by this authorKuiyu Cheng
Faculty of Engineering, University of Wollongong, Northfields Avenue, Wollongong, NSW2522, Australia
Search for more papers by this authorCharlie Kong
Electron Microscope Unit, The University of New South Wales, Sydney, NSW 2052, Australia
Search for more papers by this authorSummary
This chapter contains sections titled:
-
Introduction
-
Experimental procedures
-
Results and Discussion
-
Conclusions
References
- Stefano Piscanec et al., Bioactivity of TiN-coated titanium implants. Acta Materialia, 52 (2004) 1237–1245.
- N. J. M Carvalho, J. Th. M. De Hosson, Deformation mechanism in TiN/(Ti, Al)N multilayers under depth-sensing indentation. Acta Materialia, 54 (2006) 1897–1862.
- U. Wiklund et al., Experimental and theoretical studies on stainless steel transfer onto a TiN-coated cutting tool. Acta Materialia, 59 (2011) 68–74.
- Moucheng Li et al., Corrosion behavior of TiN coated type 316 stainless steel in simulated PEMFC environments. Corrosion Science, 46 (2004) 1369–1380.
- I. Garcia, J. J. De Damborenea, Corrosion properties of TiN prepared by laser gas alloying of Ti and Ti6Al4V. Corrosion Science, 40 (1998) 1411–1419.
- B.S. Yilbas et al., Laser treatment and PVD TiN coating of Ti-6Al-4V alloy. Surfacd Coating & Technology, 140 (2011) 244–250.
- A. Shenhar et al. adin, Titanium nitride coating on surgical titanium alloys produced by a powder immersion reaction assisted coating method: residual stresses and fretting behavior. Surfacd Coating & Technology, 126 (2000) 210–218.
- A. Wisbey et al., Application of PVD TiN coating to Co-Cr-Mo based surgical implants, Biomaterials 8 (1987) 477–480.
- D. Starosvetsky, I. Gotman, TiN coating improves the corrosion behaviour of superelastic NiTi surgical alloy. Surfacd Coating & Technology, 148 (2001) 268–276.
- V. Jayaram et al., Contact deformation of TiN coatings on metallic substrates. Materials Science & Engineering A, 423 (2006) 8–13.
- S. Bhowmick et al., Nature of contace deformation of TiN films on steel. Journal of Materials Research, 9 (2004) 2616–2624.
- Matthew T. Tilbrook, et al., Microstructural effects on indentation failure mechanisms in TiN coatings: Finite element simulations. Acta Materialia, 55 (2007) 2489–2501.
- L. W. Ma et al., Effect of coating thickness on the deformation mechanisms in PVD TiN-coated steel. Surfacd Coating & Technology, 204 (2010) 1764–1773.
- S. Bhowmick et al., Fracture mode transitions during indentation of columnar TiN coatings on metal. Philosophical Magazine, 85 (2005) 2927–2945.
- Z. H. Xie et al., Deformation mechanisms of TiN multilayer coatings alternated by ductile or stiff interlayers. Acta Materialia, 56 (2008) 852–961.
- Z. H. Xie et al., Microstructural response of TiN monolithic and multilayer coatings during microscratch testing. Journal of Materials Research, 9 (2007) 2312–2318.
- L. W. Ma et al., Three dimensional imaging of deformation modes in TiN-based thin film coatings. Thin solid films, 515 (2007) 3190–3195.
- L. W. Ma et al., Deformation and fracture of TiN and TiAlN coatings on a steel substrate during nanoindentation. Surfacd Coating & Technology, 200 (2006) 3518–3526.
- A. Satta et al., Initial growth mechanism of atomic layer deposited TiN. Applied physics letters, 84 (2004) 4571–4573.
- J. M. Cairney et al., Degradation of TiN coatings under cyclic loading. Acta Materialia, 52 (2004) 3229–3237.
- S. W. Huang et al., Tirbological behaviour and microstructure of TiCxN(l-x) coatings deposited by filtered arc. Wear, 252 (2002) 566–579.
- Q. Zhu et al., Three dimensional microstructure study of oxide scale formed on high-speed steel by means of SEM, FIB and TEM. Corrosion, Science 53 (2011) 3603–3611.
- S. Mahieu, D. Depla, Reactive sputter deposition of TiN layers: modelling the growth by characterization of particle fluxes towards the substrate. Journal of physics D, 42 (2009) 1–16.
- M. Oden, Characterization of the induced plastic zone in a single crystal TiN(001) film by nanoindentation and transmission electron microscopy. Journal of materials research, 12 (1997) 2134–2142.
- L. Zhang, T. Ohmura, K. Seikido, Direct observation of plastic deformation in iron - 3% silicon single crystal by in situ nanoindentation in transmission electron microscopy. Scripta materialia, 64 (2011) 919–922.
