Compressive Strength of Epoxy- Graphite Nanoplatelets Composites
H. A. Colorado1,
A. Wong,
J. M. Yang,
H. A. Colorado1
Materials Science and Engineering, University of California, Los Angeles.
Universidad de Antioquia, Mechanical Engineering Department. Medellin-Colombia.
Search for more papers by this authorA. Wong
Materials Science and Engineering, University of California, Los Angeles.
Search for more papers by this authorJ. M. Yang
Materials Science and Engineering, University of California, Los Angeles.
Search for more papers by this authorH. A. Colorado1,
A. Wong,
J. M. Yang,
H. A. Colorado1
Materials Science and Engineering, University of California, Los Angeles.
Universidad de Antioquia, Mechanical Engineering Department. Medellin-Colombia.
Search for more papers by this authorA. Wong
Materials Science and Engineering, University of California, Los Angeles.
Search for more papers by this authorJ. M. Yang
Materials Science and Engineering, University of California, Los Angeles.
Search for more papers by this authorBook Editor(s): TMS,
First published: 17 March 2012
Summary
This chapter contains sections titled:
-
Introduction
-
Experimental
-
Analysis and Results
-
Summary
-
Acknowledgments
References
- Nishar Hameed, P.A. Sreekumar, Bejoy Francis, Weimin Yang, and Sabu Thomas, “Morphology, dynamic mechanical and thermal studies on poly(styrene-co-acrylonitrile) modified epoxy resin/glass fibre composites,” Composites: Part A, 38 (2007), 2422–2432.
- S. Alessi, D. Conduruta, G. Pitarresi, C. Dispenza, and G. Spadaro, “Hydrothermal ageing of radiation cured epoxy resin-polyether sulfone blends as matrices for structural composites,” Polymer Degradation and Stability, 95 (2010), 677–683.
- B. Neffgen, “Epoxy resins in the building industry-25 years of experience,” The International Journal of Cement Composites and Lightweight Concrete, 7 (4).
- Pascal Boinard, William M. Banks, and Richard A. Pethrick, “Changes in the dielectric relaxations of water in epoxy resin as a function of the extent of water ingress in carbon fibre composites,” Polymer, 46 (2005) 2218–2229.
- Q.M. Jia, J.B. Li, L.F. Wang, J.W. Zhu, and M. Zheng, “Electrically conductive epoxy resin composites containing polyaniline with different morphologies,” Materials Science and Engineering A, 448 (2007), 356–360.
- A. Toldy, B. Szolnoki, and Gy. Marosi, “Flame retardancy of fibre-reinforced epoxy resin composites for aerospace applications,” Polymer Degradation and Stability, 96 (2011), 371–376.
- B. Perret, B. Schartel, K. Stöß, M. Ciesielski, J. Diederichs, M. Döling, J. Kramer, and V. Altstädt, “Novel DOPO-based flame retardants in high-performance carbon fibre epoxy composites for aviation,” European Polymer Journal, 47 (2011), 1081–1089.
- J.T. Carter, G.T. Emmerson, C. Lo Faro, P.T. McGrail, and D.R. Moore, “The development of a low temperature cure modified epoxy resin system for aerospace composites,” Composites: Part A,, 80 (2003), 83–91.
- L. Mascia and J. Zhang, “Mechanical properties and thermal ageing of a perfluoroether-modified epoxy resin in castings and glass fibre composites,” Composites, 26 (1995), 379–385.
- Biqin Chen, Dongliang Jiang, Jingxian Zhang, Manjiang Dong, and Qingling Lin, “Gel-casting of ß-TCP using epoxy resin as a gelling agent,” Journal of the European Ceramic Society, 28 (2008), 2889–2894.
- A.H. Rezaifard, K.A. Hodd, D.A. Tod and J.M. Barton, “Toughening epoxy resins with poly(methyl methacrylate)-gr tednatural rubber and its use in adhesive formulations,” Int. J. Adhesion and Adhesives, 14 (2) (1994), 153–159.
- C. Gouri, R. Ramaswamy, and K.N. Ninan, “Studies on the adhesive properties of solid elastomer-modified novolac epoxy resin,” International Journal of Adhesion & Adhesives, 20 (2000), 305–314.
- Günter Wuzella, Andreas Kandelbauer, Arunjunai Raj Mahendran, and Alfred Teischinger, “Thermochemical and isoconversional kinetic analysis of a polyester-epoxy hybrid powder coating resin for wood based panel finishing,” Progress in Organic Coatings, 70 (2011), 186–191.
- Veena Choudhary, Nimisha Agarwal, and Indra K. Varma, “Evaluation of bisacrylate terminated epoxy resins as coatings,” Progress in Organic Coatings, 57 (2006), 223–228.
- S. W. Zhang, State-of-the-art of polymer Tribology, Tribology International Vol. 31, Nos 1–3, pp. 49–60, 1998.
- T.H. Hsieh, A.J. Kinloch, K. Masania, A.C. Taylor, and S. Sprenger, “The mechanisms and mechanics of the toughening of epoxy polymers modified with silica nanoparticles,” Polymer, 51 (2010), 6284–6294.
- Sandi G. Miller, Jonathan L. Bauer, Michael J. Maryanski, Paula J. Heimann, Jeremy P. Barlow, Jan-Michael Gosau, and Ronald E. Allred, “Characterization of epoxy functionalized graphite nanoparticles and the physical properties of epoxy matrix nanocomposites,” Composites Science and Technology, 70 (2010), 1120–1125.
