Microstructure and Mechanical Properties of Ti‐6A1‐4V Fabricated by Selective Laser Melting - Supplemental Proceedings - Wiley Online Library

Ian Gibson, “Additive manufacturing technologies: Rapid prototyping to direct digital Manufacturing”, 2009.
Google Scholar
Yadroitsev I et al., “Strategy of manufacturing components with designed internal structure by selective laser melting of metallic powder”. Applied Surface Science 2007; 254: 980–983.
10.1016/j.apsusc.2007.08.046
CAS Web of Science® Google Scholar
Zhang L et al., “Manufacture by selective laser melting and mechanical behavior of a biomedical Ti-24Zr-4Nb-7.9 Sn alloy”. Scr Mater 2011.
Google Scholar
Abd Aziz I. “Microstructure and Mechanical Properties of Ti-6Al-4V Produced by Selective Laser Sintering of Pre-alloyed Powders”. 2010.
Google Scholar
Santos E et al., “Microstructure and mechanical properties of pure titanium models fabricated by selective laser melting”. Proc Inst Mech Eng Part C 2004; 218: 711–719.
10.1243/0954406041319545
CAS Web of Science® Google Scholar
Sercombe T et al., “Heat treatment of Ti-6Al-7Nb components produced by selective laser melting”. Rapid Prototyping Journal 2008; 14: 300–304.
10.1108/13552540810907974
Web of Science® Google Scholar
Chlebus E, et al., “Microstructure and mechanical behaviour of Ti-6Al-7Nb alloy produced by selective laser melting”. Mater Charact 2011.
Google Scholar
Thijs L, et al., “A study of the microstructural evolution during selective laser melting of Ti-6Al-4V”. Acta Materialia 2010; 58: 3303–3312.
10.1016/j.actamat.2010.02.004
CAS Web of Science® Google Scholar
Facchini L, et al., “Ductility of a Ti-6 Al-4 V alloy produced by selective laser melting of prealloyed powders”. Rapid Prototyping Journal 2010; 16: 450–459.
10.1108/13552541011083371
Web of Science® Google Scholar
Ahsan MN et al., “A comparative study of laser direct metal deposition characteristics using gas and plasma-atomized Ti-6Al-4 V powders”. Materials Science and Engineering: A 2011.
Google Scholar
Gu D, et al., “Balling phenomena in direct laser sintering of stainless steel powder: Metallurgical mechanisms and control methods”. Materials & Design 2009; 30: 2903–2910.
10.1016/j.matdes.2009.01.013
CAS Web of Science® Google Scholar
Mohandas T et al., “Microstructure and mechanical properties of friction welds of an [alpha] [beta] titanium alloy”. Materials Science and Engineering A 2000; 289: 70–82.
10.1016/S0921-5093(00)00914-X
Web of Science® Google Scholar
Wu X, et al., “Microstructures of laser-deposited Ti-6Al-4V”. Mater Des 2004; 25: 137–144.
10.1016/j.matdes.2003.09.009
CAS Web of Science® Google Scholar
Thijs L, et al., “A study of the microstructural evolution during selective laser melting of Ti-6Al-4V”. Acta Materialia 2010; 58: 3303–3312.
10.1016/j.actamat.2010.02.004
CAS Web of Science® Google Scholar
Baufeld B, et al., “Wire Based Additive Layer Manufacturing: Comparison of Microstructure and Mechanical Properties of Ti-6Al-4 V Components fabricated by Laser-beam Deposition and Shaped Metal Deposition”. J Mater Process Technol 2011.
Google Scholar
Ahmed T, et al., “Phase transformations during cooling in [alpha] [beta] titanium alloys”. Materials Science and Engineering A 1998; 243: 206–211.
10.1016/S0921-5093(97)00802-2
Web of Science® Google Scholar
Leyens C “Titanium and titanium alloys”.: Wiley Online Library, 2003.
10.1002/3527602119
Google Scholar
Qazi J, et al., “Phase transformations in Ti-6Al-4V-x H alloys”. Metallurgical and Materials Transactions A 2001; 32: 2453–2463.
10.1007/s11661-001-0035-8
Web of Science® Google Scholar

Citing Literature

Supplemental Proceedings: Materials Processing and Interfaces, Volume 1

Microstructure and Mechanical Properties of Ti-6A1-4V Fabricated by Selective Laser Melting

Summary

References

Citing Literature

References

Information

About Wiley Online Library

Help & Support

Opportunities

Connect with Wiley

Microstructure and Mechanical Properties of Ti-6A1-4V Fabricated by Selective Laser Melting

Summary

References

Citing Literature

References

Related

Information