7th International Symposium on High‐Temperature Metallurgical Processing
Editor(s):
Jiann-Yang Hwang, Tao Jiang, P. Chris Pistorius, Gerardo R.F. Alvear F., Onuralp Yücel, Liyuan Cai, Baojun Zhao, Dean Gregurek, Varadarajan Seshadri,
First published:3 February 2016
Print ISBN:9781119225751 |Online ISBN:9781119274643 |DOI:10.1002/9781119274643
Copyright © 2016 by The Minerals, Metals & Materials Society. All rights reserved
About this book
The technology, operation, energy, environmental, analysis, and future development of the metallurgical industries utilizing high temperature processes are covered in the book. The innovations on the extraction and production of ferrous and nonferrous metals, alloys, and refractory and ceramic materials, the heating approaches and energy management, and the treatment and utilizations of the wastes and by-products are the topics of special interests.
This book focuses on the following issues:
- High Efficiency New Metallurgical Process and Technology
Fundamental Research of Metallurgical Process - Alloys and Materials Preparation
- Direct Reduction and Smelting Reduction
- Coking, New Energy and Environment
- Utilization of Solid Slag/Wastes and Complex Ores
- Characterization of High Temperature Metallurgical Process
Author Bios
Jiann-Yang Hwang, Michigan Technological University
Tao Jiang, Central South University
Petrus Christiaan Pistorius, Carnegie Mellon University
Gerardo Alvear, Xstratatech
Onuralp Yucel, Istanbul Technical University
Liyuan Cai, Central South University
Baojun Zhao, The University of Queensland
Dean Gregurek, RHI AG Technology Center
Varadarajan Seshadri, Universidade Federal de Minas Gerais
Table of Contents
Export Citations
Part I : Energy Efficient Clean Metallurgical Technology
Part II : Extraction and Recovery of Metals
CHAPTER 9
no
Separation of Rhenium and Molybdenum from Molybdenite Concentrate by Microwave-Assisted Roasting (Pages: 67-76)
CHAPTER 11
no
Research on Enrichment of MFe and RO Phase from Converter Steel Slag by Super Gravity (Pages: 85-92)
CHAPTER 12
no
Volatilization Of Rhenium From Molybdenite Concentrate by Oxidative Roasting (Pages: 93-100)
CHAPTER 15
no
An Investigation on Antimony Production by Using Niederschlag Process (Pages: 117-121)
CHAPTER 16
no
Oxygen-Rich Side Blow Bath Smelting Technology ‒ New Developments in China (Pages: 123-130)
Part III : Alloys and Materials Preparation
CHAPTER 20
no
Preliminary Study on Preparation of Al-Sc Master Alloy in Na3AlF6-K3AlF6-AlF3 Melt (Pages: 157-163)
CHAPTER 21
no
Effect of The Reductants on The Production of Iron Based Alloys From Mill Scale by Metallothermic Process (Pages: 165-171)
CHAPTER 24
no
Thermodynamic Analysis and Experiments on Vacuum Separation of Sn-Sb Alloy (Pages: 189-196)
Part IV : Fundamental Research of Metallurgical Process
CHAPTER 29
no
So3 Formation in Copper Smelting Process: Thermodynamic Consideration (Pages: 229-236)
CHAPTER 30
no
Effect of Oxidation on Wetting Behavior Between Silicon and Silicon Carbide (Pages: 237-242)
CHAPTER 31
no
Effect of CaO/SiO2 and P2O5 on The Viscosity of FeO-SiO2-V2O3-CaO-P2O5 Slags (Pages: 243-249)
CHAPTER 34
no
Origin and Evolution of Non-Metallic Inclusions For Al-Killed Steel During Eaf-Lf-Vd-Cc Process (Pages: 271-278)
Part V : Direct Reduction and Smelting Reduction
CHAPTER 37
no
Experiment Research on Direct Reduction of Celestine by Rotary Hearth Furnace Proces (Pages: 295-302)
CHAPTER 41
no
Influence of Operation Parameters on Mass Fraction of Sulfur in The Hot Metal in Corex Process (Pages: 327-334)
CHAPTER 42
no
Influence of Operation Parameters on Sticking Behavior of Pellets in Corex Shaft Furnace (Pages: 335-342)
Part VI : Sintering and Pelletizing of Iron Ores
Part VII : Utilization of Complex Ores
CHAPTER 48
no
Characterization of Sulfidation Roasting of an Iron-Rich Manganese Oxide Ore With Elemental Sulfur (Pages: 385-394)
CHAPTER 50
no
A Study on the Characterization of Nickel Laterites of Central Anatolia (Pages: 403-410)
CHAPTER 54
no
Research on Leaching of Zinc Sulfide Ores Through Synergistic Coordination (Pages: 435-441)
CHAPTER 55
no
Effect of Compound Additives on Synthetic Magnesium Aluminate Spinel Under Low Temperature (Pages: 443-451)
Part VIII : Characterization and Simulation of High Temperature Process
CHAPTER 59
no
Characterization of Iron-Bearing Dust Pellet in Composite Agglomeration Process(Cap) (Pages: 479-486)
CHAPTER 60
no
Evaluation of Heat Flow and Thermal Stratification in A Steelmaking Ladle Through Mathematical Modelling (Pages: 487-494)
CHAPTER 61
no
Viscous and Crystallization Characteristics of CaO-SiO2-MgO-Al2O3-FetO-P2O5-(CaF2) Steelmaking Slags (Pages: 495-500)
CHAPTER 62
no
Chemical, Physical and Morphological Changes of Sintering Dust by Mechanical Activation (Pages: 501-509)
CHAPTER 63
no
Dynamic Thermal Simulation Study of Copper Slag Dilution Under Direct Current Field (Pages: 511-518)
Part IX : Treatment and Recycling of Solid Slag/Wastes
CHAPTER 67
no
Removal of Iron Impurity from Zinc Calcine After Magnetization Roasting (Pages: 543-550)
CHAPTER 70
no
Preparation of TiC from Titanium Bearing Blast Furnace Slag by Carbothermal Reduction in Vacuum (Pages: 567-573)
CHAPTER 71
no
Study on Preparation of Activated Carbon from Hawaii Nut Shell via Steam Physical Activation (Pages: 575-582)
CHAPTER 72
no
Composition Modification of ZnO Containing Fayalite Slag from Secondary Source Copper Smelting (Pages: 583-589)
CHAPTER 74
no
Research on the Melting Characteristics During the Recycling Process of Q345B Steel LF Refining Waste Slag (Pages: 591-595)
Part X : Poster Session
CHAPTER 77
no
Central Segregation of High-carbon Steel Billet and Its Heredity to the Hotrolled Wire Rods (Pages: 625-633)
CHAPTER 78
no
Transformation of Sodium Jarosite to Hematite in Hydrothermal Iron Precipitation Process (Pages: 635-642)
CHAPTER 79
no
Effect of Different Cooling System on the Solidification of the Sinters (Pages: 643-650)
CHAPTER 80
no
Filtration Property of Pure Willemite Acid Leaching Sludge Under Pressure (Pages: 651-658)
CHAPTER 82
no
Indirect Experimental Study on the Oxidation of Hot Metal Bearing Vanadium and Chromium (Pages: 667-674)
CHAPTER 83
no
Influence of CaO on Non-isothermal Crystallization Kinetics of Spinels in Vanadium Slag (Pages: 675-682)
CHAPTER 84
no
Recovery of Nickel and Copper from Polymetallic Sulfide Concentrate Through Salt Roasting Using Nh4Cl (Pages: 683-690)
CHAPTER 85
no