• Issue

    Journal of Applied Polymer Science: Volume 120, Issue 1

    1-622
    5 April 2011
Previous Issue|Next Issue
Export Citation(s)Download PDF(s)

Cellular compatibility of copolymer hydrogels based on site-selectively-modified chitosan with poly(N-isopropyl acrylamide)

Trong-Ming Don,  Shu-Chung Chou,  Liao-Ping Cheng,  Hung-Yin Tai, 
  • Pages: 1-12
  • First Published: 06 October 2010

Effect of recrystallization on the molecular mobility of a copolymer of vinylidene fluoride and hexafluoropropylene

Valentin V. Kochervinskij,  Inna A. Malyshkina,  Natalia P. Bessonova,  Sergey N. Suljanov,  Kirill A. Dembo, 
  • Pages: 13-20
  • First Published: 06 October 2010

Structure, properties, and phase transitions of melt-spun poly(vinylidene fluoride) fibers

W. Steinmann,  S. Walter,  G. Seide,  T. Gries,  G. Roth,  M. Schubnell, 
  • Pages: 21-35
  • First Published: 06 October 2010

MgCl2-supported catalyst containing mixed internal donors for propylene polymerization

Futang Gao,  Xianzhi Xia,  Bingquan Mao, 
  • Pages: 36-42
  • First Published: 11 October 2010

Architecture of colloidal crystals constructed by silica hybrid nanoparticles

Koji Ishizu,  Yoko Tokuno,  Dong Hoon Lee,  Satoshi Uchida,  Masaaki Ozawa, 
  • Pages: 43-49
  • First Published: 11 October 2010

Influence of the reactive processing of recycled poly(ethylene terephthalate)/poly(ethylene-co-glycidyl methacrylate) blends

Noriaki Kunimune,  Kazushi Yamada,  Yew Wei Leong,  Supaphorn Thumsorn,  Hiroyuki Hamada, 
  • Pages: 50-55
  • First Published: 11 October 2010

Synthesis and curing properties of a novel curing agent based on N-(4-hydroxyphenyl) maleimide and dicyclopentadiene moieties

Jia Liu,  Xiao-Liang Zeng,  Xu-Yong Zhang,  Xin-Nian Xia, 
  • Pages: 56-61
  • First Published: 11 October 2010

Cure kinetics of a glass/epoxy prepreg by dynamic differential scanning calorimetry

Mehran Hayaty,  Mohammad Hosain Beheshty,  Masoud Esfandeh, 
  • Pages: 62-69
  • First Published: 11 October 2010

Impact of injection-molding processing parameters on the electrical, mechanical, and thermal properties of thermoplastic/carbon nanotube nanocomposites

P. F. Rios,  A. Ophir,  S. Kenig,  R. Efrati,  L. Zonder,  R. Popovitz-Biro, 
  • Pages: 70-78
  • First Published: 11 October 2010

Ionic salt permeability through phase-separated membranes composed of amphoteric polymers

Eri Ito,  Masahiro Higuchi,  Katsuhiro Yamamoto,  Kenji Nagata,  Takatoshi Kinoshita, 
  • Pages: 79-85
  • First Published: 11 October 2010

Effect of repetitive processing on the mechanical properties and fracture toughness of dynamically vulcanized iPP/EPDM blends

Wei-Kang Wang,  Wei Yang,  Rui-Ying Bao,  Bang-Hu Xie,  Ming-Bo Yang, 
  • Pages: 86-94
  • First Published: 11 October 2010

Effect of the viscosity and processing parameters on the surface resistivity of polypropylene/multiwalled carbon nanotube and ethylene–propylene–diene/multiwalled carbon nanotube nanocomposites

Kyoung-Tae Min,  Gue-Hyun Kim, 
  • Pages: 95-100
  • First Published: 11 October 2010

Control of molecular weight distribution for polypropylene obtained by a commercial Ziegler–Natta catalyst: Effect of a cocatalyst and hydrogen

He-Xin Zhang,  Young-Joo Lee,  Joon-Ryeo Park,  Dong-Ho Lee,  Keun-Byoung Yoon, 
  • Pages: 101-108
  • First Published: 11 October 2010

Aerobic oxidative polymerization of 2,6-dimethylphenol in water with a highly efficient copper(II)– poly(N-vinylimidazole) complex catalyst

Wenli Zhang,  Huan Wang,  Baoqing Shentu,  Cheng Gu,  Zhixue Weng, 
  • Pages: 109-115
  • First Published: 11 October 2010

Polymerization of epoxidized soybean oil with maleinized polybutadiene

Cem Öztürk,  Selim H. Küsefoğlu, 
  • Pages: 116-123
  • First Published: 11 October 2010

New hybrid system: Poly(ethylene glycol) hydrogel with covalently bonded pegylated nanotubes

Virginia Saez-Martinez,  Ainara Garcia-Gallastegui,  Carolina Vera,  Beatriz Olalde,  Iratxe Madarieta,  Isabel Obieta,  Nerea Garagorri, 
  • Pages: 124-132
  • First Published: 11 October 2010

Improving tensile strength and toughness of melt processed polyamide 6/multiwalled carbon nanotube composites by in situ polymerization and filler surface functionalization

Hua Deng,  Emiliano Bilotti,  Rui Zhang,  Ke Wang,  Qin Zhang,  Ton Peijs,  Qiang Fu, 
  • Pages: 133-140
  • First Published: 11 October 2010

Relating scratch resistance to injection molding-induced morphology of polypropylene

Yutaka Kobayashi,  Yasuhiko Otsuki,  Hiroaki Kanno,  Yasuhiro Hanamoto,  Toshitaka Kanai, 
  • Pages: 141-147
  • First Published: 11 October 2010

Synthesis and properties of novel fluorinated epoxy resins

Z. Y. Ge,  Z. Q. Tao,  G. Li,  J. P. Ding,  L. Fan,  S. Y. Yang, 
  • Pages: 148-155
  • First Published: 13 October 2010

Surface microphase separation in PDMS-b-PMMA-b-PHFBMA triblock copolymer films

Ke-Jian Lian,  Chang-Qing Chen,  Hui Liu,  Ning-Xing Wang,  Hai-Jiang Yu,  Zheng-Hong Luo, 
  • Pages: 156-164
  • First Published: 13 October 2010

FTIR equivalent weight determination of perfluorosulfonate polymers

Stephen A. Perusich, 
  • Pages: 165-183
  • First Published: 13 October 2010

Functionalization of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) films via surface-initiated atom transfer radical polymerization: Comparison with the conventional free-radical grafting procedure

Hoi-Kuan Lao,  Estelle Renard,  Amani El Fagui,  Valérie Langlois,  Karine Vallée-Rehel,  Isabelle Linossier, 
  • Pages: 184-194
  • First Published: 13 October 2010

Evaluation of the availability of easy cationic dyeable copolyester fibers as electrostatic flocking piles

Lifang Liu,  Longdi Cheng,  Jianyong Yu,  Hao Xie, 
  • Pages: 195-201
  • First Published: 13 October 2010

Preparation and characterization of UV-curable organic/inorganic hybrid composites for NIR cutoff and antistatic coatings

Hsien-Tang Chiu,  Chi-Yung Chang,  Cheng-Lang Chen,  Tzong-Yiing Chiang,  Ming-Tai Guo, 
  • Pages: 202-211
  • First Published: 13 October 2010

Synthesis and properties of waterborne poly(urethane urea)s containing polydimethylsiloxane

Young-Hee Lee,  Eun-Ji Kim,  Han-Do Kim, 
  • Pages: 212-219
  • First Published: 13 October 2010

Novel whey protein-based aqueous polymer-isocyanate adhesive for glulam

Zhenhua Gao,  Wenbo Wang,  Zongyan Zhao,  Mingruo Guo, 
  • Pages: 220-225
  • First Published: 13 October 2010

Correlations between creep, shrinkage, and dynamic mechanical characteristics of magnetic tape materials

Brian L. Weick, 
  • Pages: 226-241
  • First Published: 13 October 2010

Studies on chitosan as an admixture for cement-based materials: Assessment of its viscosity enhancing effect and complexing ability for heavy metals

M. Lasheras-Zubiate,  I. Navarro-Blasco,  J. M. Fernández,  J. I. Alvarez, 
  • Pages: 242-252
  • First Published: 13 October 2010

Silk grafting with methacrylamide: A near-infrared spectroscopy study

Marina Zoccola,  Alessandra Boschi,  Cristina Arosio,  Raffaella Mossotti,  Riccardo Innocenti,  Giuliano Freddi, 
  • Pages: 253-262
  • First Published: 13 October 2010

Application of lime kiln dust as a filler in the natural rubber industry

Wanvimon Arayapranee,  Garry L. Rempel, 
  • Pages: 263-272
  • First Published: 13 October 2010

Preparation and properties of biocomposites composed of epoxidized soybean oil, tannic acid, and microfibrillated cellulose

Mitsuhiro Shibata,  Naozumi Teramoto,  Kyohei Makino, 
  • Pages: 273-278
  • First Published: 13 October 2010

Copolymers of a new methacrylate monomer bearing oxime ester and ether with methyl methacrylate: Synthesis, characterization, monomer reactivity ratios, and biological activity

Ibrahim Erol,  Sait Kolu, 
  • Pages: 279-290
  • First Published: 13 October 2010

Thermal and morphological stability of polystyrene microcapsules containing phase-change materials

Luz Sánchez -Silva,  Juan F. Rodríguez,  Manuel Carmona,  Amaya Romero,  Paula Sánchez, 
  • Pages: 291-297
  • First Published: 13 October 2010

Styrene–butadiene rubber/graphite powder composites: Rheometrical, physicomechanical, and morphological properties

M. N. Ismail,  A. I. Khalaf, 
  • Pages: 298-304
  • First Published: 13 October 2010

Wicking properties of various polyamide nanofibrous structures with an optimized method

Bert De Schoenmaker,  Lien Van der Schueren,  Sander De Vrieze,  Philippe Westbroek,  Karen De Clerck, 
  • Pages: 305-310
  • First Published: 13 October 2010

Hydroxyalkyl derivatives of phenyldiamine as modifiers for unsaturated polyester resins, Part 1: Derivatives of phenyl-1,4-diamine

Jerzy Duliban, 
  • Pages: 311-321
  • First Published: 13 October 2010

The illumination intensity and applied bias voltage on dielectric properties of au/polyvinyl alcohol (Co, Zn-doped)/n-Si Schottky barrier diodes

Habibe Uslu,  Şemsettin Altındal,  Tuncay Tunç,  İbrahim Uslu,  Tofig S. Mammadov, 
  • Pages: 322-328
  • First Published: 13 October 2010

Effects of atomic oxygen and ultraviolet in low earth orbit on low surface energy polymer film

Xiaolong Wang,  Zhou Feng,  Weimin Liu, 
  • Pages: 329-334
  • First Published: 13 October 2010

A novel route for synthesis of temperature responsive nanoparticles

Priyanka Dey,  Virendra K. Rajora,  Manjeet Jassal,  Ashwini K. Agrawal, 
  • Pages: 335-344
  • First Published: 13 October 2010

Synthesis, characterization, and application of polyethersulfone bound-iminodiacetic acid

Xue L. Cao,  Chong Cheng,  Ze H. Yin,  Peng L. Bai,  Qiang Wei,  Bao H. Fang,  Chang S. Zhao, 
  • Pages: 345-350
  • First Published: 13 October 2010

SEBS/PPy.DBSA blends: Preparation and evaluation of electromechanical and dynamic mechanical properties

D. Muller,  M. Garcia,  G. V. Salmoria,  A. T. N. Pires,  R. Paniago,  G. M. O. Barra, 
  • Pages: 351-359
  • First Published: 13 October 2010

Preparation and properties of high-performance polysilsesquioxanes/bismaleimide-triazine hybrids

Jiang-Tao Hu,  Aijuan Gu,  Guozheng Liang,  Dongxian Zhuo,  Li Yuan, 
  • Pages: 360-367
  • First Published: 13 October 2010

Research on the related properties of EVM/Al(OH)3/SiO2 composites applied for halogen-free flame retardant cable insulation and jacket

Lichun Wang,  Genlin Wang,  Pingkai Jiang, 
  • Pages: 368-378
  • First Published: 13 October 2010

Mechanical aging behavior of styrene-butadiene rubbers evaluated by abrasion test

Takeo Nakazono,  Akikazu Matsumoto, 
  • Pages: 379-389
  • First Published: 13 October 2010

Electrical and dielectric characteristics of Al/polyindole Schottky barrier diodes. II. Frequency dependence

Seckin Altindal Yeriskin,  H. Ibrahim Unal,  Bekir Sari, 
  • Pages: 390-396
  • First Published: 14 October 2010

Polarizer effect and structure of iodinated before and after casting poly(vinyl alcohol) film

Eun Joo Shin,  Won Seok Lyoo,  Yang Hun Lee, 
  • Pages: 397-405
  • First Published: 14 October 2010

Preparation and properties of amperometric uric acid sensor based on poly(2-aminophenol)

Sezen Kurşun,  Bilge Z. Ekinci,  Aziz Paşahan,  Ergun Ekinci, 
  • Pages: 406-410
  • First Published: 14 October 2010

Rheological and adhesion properties of acrylic pressure-sensitive adhesives

S. Mojtaba Taghizadeh,  Diba Ghasemi, 
  • Pages: 411-418
  • First Published: 14 October 2010

The preparation and characterization of crosslinked polytriazoles with different network grids

Xiaofei Wang,  Liqiang Wan,  Yanpeng E,  Farong Huang,  Lei Du, 
  • Pages: 419-424
  • First Published: 14 October 2010

A facile approach to fabricate porous nylon 6 nanofibers using silica nanotemplate

Quan Shi,  Narendiran Vitchuli,  Liwen Ji,  Joshua Nowak,  Marian McCord,  Mohamed Bourham,  Xiangwu Zhang, 
  • Pages: 425-433
  • First Published: 14 October 2010

Phase separation and thermal aging behavior of styrene-butadiene rubber vulcanizates using liquid polymers as plasticizers studied by differential scanning calorimetry and dynamic mechanical spectroscopy

Takeo Nakazono,  Anri Ozaki,  Akikazu Matsumoto, 
  • Pages: 434-440
  • First Published: 14 October 2010

Swelling dynamics of IPN hydrogels including acrylamide-acrylic acid-chitosan and evaluation of their potential for controlled release of piperacillin-tazobactam

Mehlika Pulat,  Nur Tan,  Fatma Kaynak Onurdağ, 
  • Pages: 441-450
  • First Published: 14 October 2010

High-performance hyperbranched poly(phenylene oxide) modified bismaleimide resin with high thermal stability, low dielectric constant and loss

Pingzhen Huang,  Aijuan Gu,  Guozheng Liang,  Li Yuan, 
  • Pages: 451-457
  • First Published: 14 October 2010

Preparation, structure, and properties of montmorillonite/cellulose II/natural rubber nanocomposites

Roberta M. Mariano,  Paulo Henrique de S. Picciani,  Regina C. R. Nunes,  Leila L. Y. Visconte, 
  • Pages: 458-465
  • First Published: 14 October 2010

Degradation and initiation polymerization mechanism of α-methylstyrene-containing macroinitiators

Shan Jiang,  Jianping Deng,  Qiang Yu,  Wantai Yang, 
  • Pages: 466-473
  • First Published: 14 October 2010

Synthesis of s-triazine-based hyperbranched polyurethane for novel carbon-nanotube-dispersed nanocomposites

Sibdas Singha Mahapatra,  Sravendra Rana,  Jae Whan Cho, 
  • Pages: 474-483
  • First Published: 19 October 2010

Effect of microencapsulation on dyeing behaviors of disperse dyes without auxiliary solubilization

Luo Yan,  Zhong Yi,  Zhang Ben,  Du Juan,  Chen Shuilin, 
  • Pages: 484-491
  • First Published: 19 October 2010

Thermoresponsive shape memory characteristics of polyurethane electrospun web

Seung Eun Chung,  Chung Hee Park,  Woong-Ryeol Yu,  Tae Jin Kang, 
  • Pages: 492-500
  • First Published: 19 October 2010

Preparation of raspberry-like poly(methyl methacrylate) particles by seeded dispersion polymerization

Shan Shi,  Limin Zhou,  Tao Wang,  Lina Bian,  Yantao Tang,  Shin-ichi Kuroda, 
  • Pages: 501-508
  • First Published: 19 October 2010

Degradation of poly(D,L-lactic acid)-b-poly(ethylene glycol) copolymer and poly(L-lactic acid) by electron beam irradiation

Peikai Miao,  Dimeng Wu,  Ke Zeng,  Chun'e Zhao,  Guoliang Xu,  Zhifu Huang,  Gang Yang, 
  • Pages: 509-517
  • First Published: 19 October 2010

Preparation of amphoteric polyacrylamide flocculant and its application in the treatment of tannery wastewater

Junfeng Zhu,  Guanghua Zhang,  Junguo Li, 
  • Pages: 518-523
  • First Published: 19 October 2010

One-step fabrication of fluoropolymer transparent films with superhydrophobicity by dry method

Jian-Ming Wang,  Li-Duo Wang,  Lin Feng, 
  • Pages: 524-529
  • First Published: 19 October 2010

Rigid polyurethane foam based on modified vegetable oil

Vinícius B. Veronese,  Rodrigo K. Menger,  Maria Madalena de C. Forte,  Cesar L. Petzhold, 
  • Pages: 530-537
  • First Published: 19 October 2010

Synthesis of azo chromophores by using a polymer-supported sodium nitrite

Mohammad Ali Karimi Zarchi,  Mohammad Karimi, 
  • Pages: 538-543
  • First Published: 19 October 2010

Poly(para-dioxanone)/poly(D,L-lactide) blends compatibilized with poly(D,L-lactide-co-para-dioxanone)

Wei Bai,  Qing Li,  Liu-Yun Jiang,  Zhi-Ping Zhang,  Shen-Lan Zhang,  Cheng-Dong Xiong, 
  • Pages: 544-551
  • First Published: 19 October 2010

Evaluation of high performance fabric under light irradiation

Xiaoyan Liu,  Weidong Yu,  Ning Pan, 
  • Pages: 552-556
  • First Published: 19 October 2010

Preparation of porous PVC membrane via a phase inversion method from PVC/DMAc/water/additives

Shuo Mei,  Changfa Xiao,  Xiaoyu Hu, 
  • Pages: 557-562
  • First Published: 19 October 2010

Water absorption and dimensional stability of short kenaf fiber-filled polypropylene composites treated with maleated polypropylene

T. T. Law,  Z. A. Mohd Ishak, 
  • Pages: 563-572
  • First Published: 19 October 2010

Effect of stereoregularity and molecular weight on the mechanical properties of poly(vinyl alcohol) hydrogel

Ryohei Fukae,  Miki Yoshimura,  Tohei Yamamoto,  Katsuyoshi Nishinari, 
  • Pages: 573-578
  • First Published: 19 October 2010

Preparation and properties of nonionic polyol dispersion from terpinene-maleic ester-type epoxy resin

Guo-Min Wu,  Zhen-Wu Kong,  Jian Chen,  Jian-Chun Jiang, 
  • Pages: 579-585
  • First Published: 19 October 2010

Metal ion removal properties of crosslinked poly(acrylamide-co-2-acrylamide-2-methyl-1-propane sulfonic acid)

Bernabé L. Rivas,  Carla Muñoz,  Lorena Leiton,  S. Amalia Pooley, 
  • Pages: 586-591
  • First Published: 19 October 2010

Effect of applied voltage on diameter and morphology of ultrafine fibers in bubble electrospinning

Yong Liu,  Liang Dong,  Jie Fan,  Rui Wang,  Jian-Yong Yu, 
  • Pages: 592-598
  • First Published: 19 October 2010

Ethylene polymerization with methylaluminoxane/(nBuCp)2ZrCl2 catalyst supported on silica and silica-alumina at different AlMAO/Zr molar ratios

A. Carrero,  R. van Grieken,  B. Paredes, 
  • Pages: 599-606
  • First Published: 19 October 2010

Effect of organo-modified layered silicates on flammability performance of high-density polyethylene/rice husk flour nanocomposite

Behzad Kord, 
  • Pages: 607-610
  • First Published: 19 October 2010

Regenerability of antibacterial activity of interpenetrating polymeric N-halamine and poly(ethylene terephthalate)

Nan Zhao,  George G. Zhanel,  Song Liu, 
  • Pages: 611-622
  • First Published: 20 October 2010