• Issue

    Polymers for Advanced Technologies: Volume 25, Issue 12

    1377-1632
    December 2014
Previous Issue|Next Issue
Export Citation(s)Download PDF(s)

Special issue: Research articles

Dynamic property and constitutive model of polyvinyl butaral material at high strain rates

Zhonggao Yang,  Mengyan Zang, 
  • Pages: 1377-1385
  • First Published: 30 June 2014

An experimental investigation on the low-velocity impact behavior of 3D five-directional braided composites

Shi Yan,  Jinyang Zhao,  Xiamei Lu,  Tao Zeng, 
  • Pages: 1386-1390
  • First Published: 09 July 2014

One-pot synthesis of polyaniline doped with transition metal ions using H2O2 as oxidant

Q. Huang,  G. Chen,  J. Liu, 
  • Pages: 1391-1395
  • First Published: 14 July 2014

Electrical–thermal aging characteristic research of polymer materials by infrared spectroscopy

Wei Wang,  Dongxin He,  Jiefeng Gu,  Jian Lu,  Jiazhen Du, 
  • Pages: 1396-1405
  • First Published: 06 August 2014

Effects of compatibility of poly(l-lactic-acid) and thermoplastic polyurethane on mechanical property of blend fiber

Dan-Ying Zuo,  Lei Zhang,  Chang-Hai Yi,  Han-Tao Zuo, 
  • Pages: 1406-1411
  • First Published: 16 September 2014

Research articles

Tuning gradient property and initiating gradient photopolymerization of acrylamide aqueous solution of a hydrosoluble photocleavage polysiloxane-based photoinitiator

Jiye Cheng,  Shengling Jiang,  Yanjing Gao,  Jiansheng Wang,  Fang Sun, 
  • Pages: 1412-1418
  • First Published: 22 September 2014

The application of transition metal molybdates (AMoO4, A = Co, Ni, Cu) as additives in acrylonitrile-butadiene-styrene with improved flame retardant and smoke suppression properties

Biao Wang,  Keqing Zhou,  Saihua Jiang,  Yuan Hu,  Z. Gui, 
  • Pages: 1419-1425
  • First Published: 25 August 2014

A review on the role of proton exchange membrane on the performance of microbial fuel cell

Mostafa Rahimnejad,  Gholamreza Bakeri,  Mostafa Ghasemi,  Alireza Zirepour, 
  • Pages: 1426-1432
  • First Published: 05 September 2014

Prediction of environmental stress cracking in polycarbonate by molecular modeling

David Alperstein,  Dafna Knani,  Nikolai Borchmann,  Marcel Spekowius,  Christian Hopmann, 
  • Pages: 1433-1438
  • First Published: 05 September 2014

Synthesis and characterization of electrically conducting polymers for regenerative engineering applications: sulfonated ionic membranes

Roshan James,  Rajaram K. Nagarale,  Vinay K. Sachan,  Christopher Badalucco,  Prashant K. Bhattacharya,  Sangamesh G. Kumbar, 
  • Pages: 1439-1445
  • First Published: 05 September 2014

Conductive elastomeric nanocomposites based on oxidation of aniline with silver nitrate via inverse emulsion polymerization

Irena Brook,  Alex Berner,  Roza Tchoudakov,  Ran Y. Suckeveriene,  Moshe Narkis, 
  • Pages: 1446-1453
  • First Published: 30 September 2014

Effect of Na-ionomer on dynamic rheological, dynamic mechanical and creep properties of acrylonitrile styrene acrylate (ASA)/Na+1 poly (ethylene-co-methacrylic acid) ionomer blend

Pulak Datta,  Chandan Guha,  Gautam Sarkhel, 
  • Pages: 1454-1463
  • First Published: 05 September 2014

Morphology and mechanical behavior of isotactic polypropylene with different stereo-defect distribution in injection molding

Hongmei Peng,  Bin Wang,  Jinggang Gai,  Jinyao Chen,  Feng Yang,  Ya Cao,  Huilin Li,  Jian Kang,  Ming Xiang, 
  • Pages: 1464-1470
  • First Published: 12 September 2014

Modeling and simulation of morphology variation during the solidification of polymer melts with amorphous and semi-crystalline phases

Yue Mu,  Guoqun Zhao,  Anbiao Chen,  Shuai Li, 
  • Pages: 1471-1483
  • First Published: 22 September 2014

Controlled migration of antifog additives from LLDPE compatibilized with LLDPE grafted maleic anhydride

Koranit Shlosman,  Ran Y. Suckeveriene,  Jasmine Rosen-Kligvasser,  Roza Tchoudakov,  Evgeni Zelikman,  Raphael Semiat,  Moshe Narkis, 
  • Pages: 1484-1491
  • First Published: 05 September 2014

Homogeneous poly(L-lactic acid)/chitosan blended films

C. S. Ferreira,  S. G. Caridade,  J. F. Mano,  N. M. Alves, 
  • Pages: 1492-1500
  • First Published: 12 September 2014

Synthesis of electro-active membranes by chemical vapor deposition (CVD) process

Tariq Bashir,  Jawad Naeem,  Mikael Skrifvars,  Nils-Krister Persson, 
  • Pages: 1501-1508
  • First Published: 22 September 2014

Pyridine modified polyethylene copolymer compatibilizer for melt blended carbon nanotube composites: effects of chain structure and matrix viscosity

Eyal Cohen,  Amos Ophir,  Samuel Kenig,  Carol Barry,  Joey Mead, 
  • Pages: 1509-1514
  • First Published: 12 September 2014

In-situ thermal reduction and effective reinforcement of graphene nanosheet/poly (ethylene glycol)/poly (lactic acid) nanocomposites

Xiang Lu,  Jintao Huang,  Li Yang,  Ning Zhang,  Gang Jin,  Jinping Qu, 
  • Pages: 1515-1522
  • First Published: 13 October 2014

Synthesis and properties of thermally stable polyimides bearing pendent fluorene moieties

Zahra Rafiee,  Leila Golriz, 
  • Pages: 1523-1529
  • First Published: 12 September 2014

Flame retardant effects of organic inorganic hybrid intumescent flame retardant based on expandable graphite in silicone rubber composites

Xilei Chen,  Jinlong Zhuo,  Wenkui Song,  Chuanmei Jiao,  Yi Qian,  Shaoxiang Li, 
  • Pages: 1530-1537
  • First Published: 22 October 2014

Low dielectric materials from fluorinated polybenzoxazines

A. Shakila Parveen,  P. Thirukumaran,  M. Sarojadevi, 
  • Pages: 1538-1545
  • First Published: 30 September 2014

Thermally conductive cyanate ester nanocomposites filled with graphene nanosheets and multiwalled carbon nanotubes

Chunbao Zhao,  Suichun Xu,  Yufang Qin,  Hexiang Chen,  Wei Zhao,  Fengmei Sun,  Xianzhong Zhu, 
  • Pages: 1546-1551
  • First Published: 22 September 2014

Effects of melamine polyphosphate and halloysite nanotubes on the flammability and thermal behavior of polyamide 6

Jun Sun,  Xiaoyu Gu,  Mathieu Coquelle,  Serge Bourbigot,  Sophie Duquesne,  Mathilde Casetta,  Sheng Zhang, 
  • Pages: 1552-1559
  • First Published: 22 September 2014

Room temperature polymerization of poly(3,4-ethylenedioxythiophene) as transparent counter electrodes for dye-sensitized solar cells

Suwen Gao,  Zhang Lan,  Wanxia Wu,  Lanfang Que,  Jihuai Wu,  Jianming Lin, 
  • Pages: 1560-1564
  • First Published: 22 September 2014

“Experimentation and modeling for the apparent elongation viscosity of polymer melts with the White–Metzner model”

Gwo-Geng Lin,  Jin-Ton Chang,  Ting-Wei Kuo, 
  • Pages: 1565-1571
  • First Published: 30 September 2014

Enhancement on interlaminar shear strength and water-lubricated tribological performance of high-strength glass fabric/phenolic laminate by the incorporation of carbon nanotubes

Ning Liu,  Jianzhang Wang,  Jie Yang,  Gaofeng Han,  Fengyuan Yan, 
  • Pages: 1572-1579
  • First Published: 22 September 2014

Carboxymethyl chitosan-montmorillonite nanoparticles for controlled delivery of isoniazid: evaluation of the effect of the glutaraldehyde and montmorillonite

Nibedita Banik,  Anand Ramteke,  Tarun K. Maji, 
  • Pages: 1580-1589
  • First Published: 09 October 2014

Synthesis, characteristics and adsorption properties of polyphenylene sulfide based strong acid ion exchange fiber

Dengke Zhang,  Huajie Yao,  Dongju Zhou,  Libo Dai,  Jie Zhang,  Siguo Yuan, 
  • Pages: 1590-1595
  • First Published: 30 September 2014

Electrospun core–sheath fibers for integrating the biocompatibility of silk fibroin and the mechanical properties of PLCL

Guiyang Liu,  Qiang Tang,  Yanni Yu,  Jing Li,  Jingwan Luo,  Mingzhong Li, 
  • Pages: 1596-1603
  • First Published: 30 September 2014

Surface functionalized boehmite sheets filled epoxy composites with enhanced mechanical and thermal properties

Tao Sun,  Zhanjun Wu,  Qin Zhuo,  Xin Liu,  Zhi Wang,  Hongyu Fan, 
  • Pages: 1604-1609
  • First Published: 30 September 2014

Novel sulfonated polyimide/ZrO2 composite membrane as a separator of vanadium redox flow battery

Jinchao Li,  Yaping Zhang,  Shuai Zhang,  Xiaodong Huang,  Lei Wang, 
  • Pages: 1610-1615
  • First Published: 07 October 2014

Influence of heat treatment on electromagnetic properties of polyimide/carbon black composites

Hongyu Wang,  Dongmei Zhu,  Wancheng Zhou,  Fa Luo, 
  • Pages: 1616-1621
  • First Published: 27 October 2014

Use of maleic anhydride compatibilization to improve toughness and other properties of polylactide blended with thermoplastic elastomers

Cevdet Kaynak,  Yelda Meyva, 
  • Pages: 1622-1632
  • First Published: 27 October 2014