• Issue

    Journal of Applied Polymer Science: Volume 133, Issue 48

    December 20, 2016
Previous Issue|Next Issue
Export Citation(s)Download PDF(s)

Cover Image

Free Access

Cover Image, Volume 133, Issue 48

  • First Published: 20 September 2016
Cover Image, Volume 133, Issue 48

Bingyao Deng and co-workers prepared biodegradable organic-inorganic polymer hybrids based on poly(ε-caprolactone) and polyhedral oligomeric silsesquioxane via open-ring polymerization. Both segments crystallized into two well-separated phases. Hybrids with high polyhedral oligomeric silsesquioxane content formed snowflake-shaped crystals, while those with low polyhedral oligomeric silsesquioxane content formed classic spherulites. (DOI: 10.1002/app.44113)

Issue Information

Free Access

Editorial Board, Aims % Scope, Table of Contents

  • First Published: 20 September 2016

Articles

Poly(ɛ-caprolactone)/polyhedral oligomeric silsesquioxane hybrids: Crystallization behavior and thermal degradation

Sainan Xia,  Qingsheng Liu,  Ying Shen,  Pengfei Yao,  Bingyao Deng, 
  • First Published: 23 August 2016
Poly(ɛ-caprolactone)/polyhedral oligomeric silsesquioxane hybrids: Crystallization behavior and thermal degradation

Preparation of biphenyl-bridged, crosslinked polyalkoxysilanes: Determination of oil/organic solvent absorption features

Soner Kizil,  Hayal Bulbul Sonmez, 
  • First Published: 19 August 2016
Preparation of biphenyl-bridged, crosslinked polyalkoxysilanes: Determination of oil/organic solvent absorption features

Cracking energy density calculation of hyperelastic constitutive model and its application in rubber fatigue life estimations

Yanhua Peng,  Guixiong Liu,  Yanming Quan,  Qilin Zeng, 
  • First Published: 17 August 2016
Cracking energy density calculation of hyperelastic constitutive model and its application in rubber fatigue life estimations

Layer thickness impact on the capacity of poly(urethaneimide) for sorbing toxic gases

Iliyan Kolev,  Gergana Alexieva,  Vesselin Strashilov,  Ismail Ben Youssef,  Frederic Sarry,  Halima Alem, 
  • First Published: 26 August 2016
Layer thickness impact on the capacity of poly(urethaneimide) for sorbing toxic gases

Application of the dry-spinning method to produce poly(ε-caprolactone) fibers containing bovine serum albumin laden gelatin nanoparticles

Bahareh Azimi,  Parviz Nourpanah,  Mohammad Rabiee,  Shahram Arbab,  Maria Grazia Cascone,  Andrea Baldassare,  Luigi Lazzeri, 
  • First Published: 17 August 2016
Application of the dry-spinning method to produce poly(ε-caprolactone) fibers containing bovine serum albumin laden gelatin nanoparticles

Morphology modulation of gas-foamed, micrometric, hollow polystyrene particles

Vincenzo Contaldi,  Luigi Imperato,  Silvia Orsi,  Ernesto Di Maio,  Paolo Antonio Netti,  Salvatore Iannace, 
  • First Published: 19 August 2016
Morphology modulation of gas-foamed, micrometric, hollow polystyrene particles

Application of polymeric high-internal-phase-emulsion-coated stationary-phase columns in open-tubular capillary electrochromatography

Sidratul Choudhury,  Damian Connolly,  Blánaid White, 
  • First Published: 19 August 2016
Application of polymeric high-internal-phase-emulsion-coated stationary-phase columns in open-tubular capillary electrochromatography

Bleached extruder chemi-mechanical pulp fiber-PLA composites: Comparison of mechanical, thermal, and rheological properties with those of wood flour-PLA bio-composites

Zhaozhe Yang,  Xinhao Feng,  Yongbao Bi,  Zhifang Zhou,  Jinquan Yue,  Min Xu, 
  • First Published: 22 August 2016
Bleached extruder chemi-mechanical pulp fiber-PLA composites: Comparison of mechanical, thermal, and rheological properties with those of wood flour-PLA bio-composites

Poly[6-(2,6-bis(1′-methylbenzimidazolyl)pyridin-4-yloxy)hexyl acrylate] (PBIP) and its terbium (III) complex (PBIP-Tb3+): Homopolymerization, optical, and magnetic performance

Dizheng Liu,  Weilin Sun,  Rong Ren,  Yanhua Wang,  Zhiquan Shen, 
  • First Published: 22 August 2016
Poly[6-(2,6-bis(1′-methylbenzimidazolyl)pyridin-4-yloxy)hexyl acrylate] (PBIP) and its terbium (III) complex (PBIP-Tb3+): Homopolymerization, optical, and magnetic performance

Controlling micro- and nanofibrillar morphology of polymer blends in low-speed melt spinning process. Part III: Fibrillation mechanism of PLA/PVA blends along the spinline

Nguyen Hoai An Tran,  Harald Brünig,  Maria Auf der Landwehr,  Gert Heinrich, 
  • First Published: 26 August 2016
Controlling micro- and nanofibrillar morphology of polymer blends in low-speed melt spinning process. Part III: Fibrillation mechanism of PLA/PVA blends along the spinline

In situ AFM study of near-surface crystallization in PET and PEN

Kei Shinotsuka,  Hazel Assender, 
  • First Published: 22 August 2016
In situ AFM study of near-surface crystallization in PET and PEN

Effects of polymerization conditions on particle size distribution in styrene-graphite suspension polymerization process

Cunwei Zhang,  Xiangmei Li,  Si Chen,  Rongjie Yang, 
  • First Published: 22 August 2016
Effects of polymerization conditions on particle size distribution in styrene-graphite suspension polymerization process

Effect of an alkalized-modified halloysite on PLA crystallization, morphology, mechanical, and thermal properties of PLA/halloysite nanocomposites

Jianhua Guo,  Junxia Qiao,  Xin Zhang, 
  • First Published: 19 August 2016
Effect of an alkalized-modified halloysite on PLA crystallization, morphology, mechanical, and thermal properties of PLA/halloysite nanocomposites

Rheology of polyacrylonitrile-based precursor polymers produced from controlled (RAFT) and conventional polymerization: Its role in solution spinning

J. Kaur,  K. Millington,  J.Y. Cai, 
  • First Published: 19 August 2016
Rheology of polyacrylonitrile-based precursor polymers produced from controlled (RAFT) and conventional polymerization: Its role in solution spinning

Preparation of epoxy-ended hyperbranched polymers with precisely controllable degree of branching by thiol-ene Michael addition

Daohong Zhang,  Yimei Wang,  Zhicai Xu,  Juan Cheng,  Sufang Chen,  Junheng Zhang,  Menghe Miao, 
  • First Published: 24 August 2016
Preparation of epoxy-ended hyperbranched polymers with precisely controllable degree of branching by thiol-ene Michael addition

Utilization of tall oil to enhance natural fibers for composite applications and production of a bioplastic

Michael George,  Paolo G. Mussone,  David C. Bressler, 
  • First Published: 19 August 2016
Utilization of tall oil to enhance natural fibers for composite applications and production of a bioplastic

Synthesis of Fe3O4@SiO2@MPS@P4VP nanoparticles for nitrate removal from aqueous solutions

Farzad Javaheri,  Shadi Hassanajili, 
  • First Published: 22 August 2016
Synthesis of Fe3O4@SiO2@MPS@P4VP nanoparticles for nitrate removal from aqueous solutions

BaTiO3 incorporation effect on the dielectric properties of polymer from aqueous emulsion: An enhanced dispersion technique

Adel Zyane,  Ahmed Belfkira,  François Brouillette,  Pascal Marchet,  Romain Lucas, 
  • First Published: 24 August 2016
BaTiO3 incorporation effect on the dielectric properties of polymer from aqueous emulsion: An enhanced dispersion technique

Photocatalytic properties of PMMA-TiO2 class I and class II hybrid nanofibers obtained by electrospinning

Federico Ohlmaier-Delgadillo,  Maria Monica Castillo-Ortega,  Rafael Ramírez-Bon,  Lorena Armenta-Villegas,  Dora Evelia Rodríguez-Félix,  Hisila Santacruz- Ortega,  Teresa del Castillo-Castro,  Irela Santos-Sauceda, 
  • First Published: 24 August 2016
Photocatalytic properties of PMMA-TiO2 class I and class II hybrid nanofibers obtained by electrospinning

Facile fabrication of double-walled polymeric hollow spheres with independent temperature and pH dual-responsiveness for synergetic drug delivery

Nan Cheng,  Yu Wang,  Feipeng Wu, 
  • First Published: 26 August 2016
Facile fabrication of double-walled polymeric hollow spheres with independent temperature and pH dual-responsiveness for synergetic drug delivery

Re-elucidation of the acid-catalyzed urea–formaldehyde reactions: A theoretical and 13C-NMR study

Taohong Li,  Jiankun Liang,  Ming Cao,  Xiaoshen Guo,  Xiaoguang Xie,  Guanben Du, 
  • First Published: 26 August 2016
Re-elucidation of the acid-catalyzed urea–formaldehyde reactions: A theoretical and 13C-NMR study

Effects of butyl acrylate modified polypropylene on structural and thermal properties of foamed polypropylene

Lifen Su,  Wei Zhang,  Ru Xia,  Jibin Miao,  Bin Yang,  Jiasheng Qian,  Fang Ruan,  Zhengzhi Zheng, 
  • First Published: 26 August 2016
Effects of butyl acrylate modified polypropylene on structural and thermal properties of foamed polypropylene

Effect of block composition on the morphology, hydration, and transport properties of sulfonated PS-b-PEGPEM-b-PS

Maritza Pérez-Pérez,  David Suleiman, 
  • First Published: 29 August 2016
Effect of block composition on the morphology, hydration, and transport properties of sulfonated PS-b-PEGPEM-b-PS

Influence of rubber content on mechanical, thermal, and morphological behavior of natural rubber toughened poly(lactic acid)–multiwalled carbon nanotube nanocomposites

Mohd Shaiful Zaidi Mat Desa,  Azman Hassan,  Agus Arsad,  Reza Arjmandi,  Nor Nisa Balqis Mohammad, 
  • First Published: 30 August 2016
Influence of rubber content on mechanical, thermal, and morphological behavior of natural rubber toughened poly(lactic acid)–multiwalled carbon nanotube nanocomposites

ESOA modified unsaturated polyester hybrid networks: A new perspective

Shivkumari Panda,  Priyabrata Mohanty,  Dibakar Behera,  Tapan Kumar Bastia, 
  • First Published: 06 September 2016
ESOA modified unsaturated polyester hybrid networks: A new perspective

Corrigendum

Free Access

Corrigendum: α-Thiophene end-capped styrene copolymer containing fullerene pendant moieties: Synthesis, characterization, and gas sensing properties

Erdem Şennik,  Büşra Şennik,  Onur Alev,  Necmettin Kılınç,  Faruk Yilmaz,  Zafer Ziya Öztürk, 
  • First Published: 19 August 2016