Article Index - Advances in Tribology

All Advances in Tribology Articles

Filters

1-20 of 166 results

Relevance

Export Citation(s)Download PDF(s)

Review Article
Open Access

oa

Tribological Performance of Laser-Based Surface Textured Nonconformal Contacts
Anand P., Ramkumar P., Lijesh K. P., Vimal Edachery,

First published: 30 September 2024
Research Article
Open Access

oa

On the Use of Taguchi Method in the Analysis of the Dynamic Response of Variable Bearing Design under Impact Load
Hazim U. Jamali, M. N. Mohammed, Muhsin Jaber Jweeg, E. Mahdi, H. S. S. Aljibori, Oday I. Abdullah, Alessandro Ruggiero, M. Alfiras, Josef Schlattmann,

First published: 20 July 2024
Research Article
Open Access

oa

Experimental Comparison of the Effect of Using Synthetic, Semi-Synthetic, and Mineral Engine Oil on Gasoline Engine Parts Wear
Mohammad Maher Kallas, Mohammad Saed Al Sabek, Younes Saoud,

First published: 12 April 2024
Review Article
Open Access

oa

A Review on the Impact of Bio-Additives on Tribological Behavior of Diesel Fuels
Hailegebrel Zewdie, Getachew Shunki Tibba, Dinku Seyoum Zeleke, Varatharaju Perumal, Pedro Dionisio Remedios Castañeiras,

First published: 12 March 2024
Research Article
Open Access

oa

Optimizing the Dry Sliding Wear Behavior of Stir-Casted Al6061/Nano-Al₂O₃/Quartz Hybrid Metal Matrix Composite Using Taguchi Method
Dagim Tirfe, Abraham Debebe Woldeyohannes, Bonsa Regassa Hunde, Temesgen Batu, Eaba Geleta,

First published: 29 February 2024
Research Article
Open Access

oa

Experimental and Numerical Investigation of Cavitation Assessment for Runner Blades in a Francis Turbine
Adnan Aslam Noon, Aamer Sharif, Melkamu Tadesse Getachew, Riaz Muhammad,

First published: 29 February 2024
Research Article
Open Access

oa

Mathematical Modeling of the Bearing Ratio Curve Rmr (50% Rz), through Investigation of the Effect of Process Parameters in Hard Turning of Steel C55 (DIN) with Mixed Ceramics MC2 (Al₂O₃ + TiC)
Mevludin Shabani, Mite Tomov,

First published: 20 February 2024
Research Article
Open Access

oa

Tribological and Mechanical Properties of Gradient Coating on Al₂O₃-Based Coating Produced by Detonation Spraying Methods
B. K. Rakhadilov, D. N. Kakimzhanov, D. B. Buitkenov, R. S. Kozhanova, L. G. Zhurerova, Zh. B. Sagdoldina,

First published: 28 November 2023
Research Article
Open Access

oa

Investigation on the Cutting Force and Surface Quality in Harmonically Vibrated Broaching (HVB)
Amirreza Mohammadian, Mahdi Sadeqi Bajestani,

First published: 25 May 2023
Research Article
Open Access

oa

Influence of Spraying Parameters on the Structure and Tribological Properties of Cr₃C₂-NiCr Detonation Coatings
Bauyrzhan Rakhadilov, Dauir Kakimzhanov, Merkhat Dautbekov, Zhuldyz Sagdoldina, Meruyert Adylkanova, Riza Abylkalykova,

First published: 31 March 2023
Research Article
Open Access

oa

Assessment of the Conventional Acid-Clay Method in Reclaiming Waste Crankcase Lubricating Oil
Patrick Opoku-Mensah, James Nana Gyamfi, Adjei Domfeh, Emmanuel Awarikabey, Emmanuela Kwao-Boateng,

First published: 02 March 2023
Research Article
Open Access

oa

Dynamic Processes of Self-Organization in Nonstationary Conditions of Friction
Tareq M. A. Al-Quraan, Olha Ilina, Mukola Kulyk, Rudolf Mnatsakanov, Oksana Mikosianchyk, Volodumur Melnyk,

First published: 27 February 2023
Research Article
Open Access

oa

Tribological Behavior of Mild Steel under Canola Biolubricant Conditions
A. Shalwan, B. F. Yousif, F. H. Alajmi, M. Alajmi,

First published: 16 October 2021
Research Article
Open Access

oa

Tribological Behavior of Ni-Based WC-Co Coatings Deposited via Spray and Fuse Technique Varying the Oxygen Flow
H. Jiménez, J. J. Olaya, J. E. Alfonso,

First published: 20 May 2021
Review Article
Open Access

oa

Computer Simulation/Prediction of Wear in Mechanical Components
Saad M. S. Mukras,

First published: 08 December 2020
Research Article
Open Access

oa

Experimental and Numerical Investigation about Small Clearance Journal Bearings under Static Load Conditions
Carlo Alberto Niccolini Marmont Du Haut Champ, Fabrizio Stefani, Paolo Silvestri,

First published: 04 December 2020
Research Article
Open Access

oa

Experimental and Molecular Level Analysis of the Tribological and Oxidative Properties of Chaulmoogra Oil
S. Salaji, N. H. Jayadas,

First published: 17 October 2020
Research Article
Open Access

oa

Experimental Investigation of the Diagnosis of Angular Contact Ball Bearings Using Acoustic Emission Method and Empirical Mode Decomposition
Ramtin Tabatabaei, Aref Aasi, Seyed Mohammad Jafari,

First published: 30 September 2020
Research Article
Open Access

oa

Tribological Behavior of Tool Steel Substrate and Solid Films against 304 BA Austenitic Stainless Steel under Dry Sliding
Natchanun Angsuseranee, Bhadpiroon Watcharasresomroeng, Pracha Bunyawanichkul, Siradej Chartniyom,

First published: 04 September 2020
Research Article
Open Access

oa

Estimation of the Oxidative Deterioration of Turbine Oil Using Membrane Patch Color
Tomohiko Kon, Tomomi Honda, Akira Sasaki,

First published: 07 February 2020

Tools

Follow journal

Advances in Tribology

Filters

All Advances in Tribology Articles

oa

Tribological Performance of Laser-Based Surface Textured Nonconformal Contacts

oa

On the Use of Taguchi Method in the Analysis of the Dynamic Response of Variable Bearing Design under Impact Load

oa

Experimental Comparison of the Effect of Using Synthetic, Semi-Synthetic, and Mineral Engine Oil on Gasoline Engine Parts Wear

oa

A Review on the Impact of Bio-Additives on Tribological Behavior of Diesel Fuels

oa

Optimizing the Dry Sliding Wear Behavior of Stir-Casted Al6061/Nano-Al₂O₃/Quartz Hybrid Metal Matrix Composite Using Taguchi Method

oa

Experimental and Numerical Investigation of Cavitation Assessment for Runner Blades in a Francis Turbine

oa

Mathematical Modeling of the Bearing Ratio Curve Rmr (50% Rz), through Investigation of the Effect of Process Parameters in Hard Turning of Steel C55 (DIN) with Mixed Ceramics MC2 (Al₂O₃ + TiC)

oa

Tribological and Mechanical Properties of Gradient Coating on Al₂O₃-Based Coating Produced by Detonation Spraying Methods

oa

Investigation on the Cutting Force and Surface Quality in Harmonically Vibrated Broaching (HVB)

oa

Influence of Spraying Parameters on the Structure and Tribological Properties of Cr₃C₂-NiCr Detonation Coatings

oa

Assessment of the Conventional Acid-Clay Method in Reclaiming Waste Crankcase Lubricating Oil

oa

Dynamic Processes of Self-Organization in Nonstationary Conditions of Friction

oa

Tribological Behavior of Mild Steel under Canola Biolubricant Conditions

oa

Tribological Behavior of Ni-Based WC-Co Coatings Deposited via Spray and Fuse Technique Varying the Oxygen Flow

oa

Computer Simulation/Prediction of Wear in Mechanical Components

oa

Experimental and Numerical Investigation about Small Clearance Journal Bearings under Static Load Conditions

oa

Experimental and Molecular Level Analysis of the Tribological and Oxidative Properties of Chaulmoogra Oil

oa

Experimental Investigation of the Diagnosis of Angular Contact Ball Bearings Using Acoustic Emission Method and Empirical Mode Decomposition

oa

Tribological Behavior of Tool Steel Substrate and Solid Films against 304 BA Austenitic Stainless Steel under Dry Sliding

oa

Estimation of the Oxidative Deterioration of Turbine Oil Using Membrane Patch Color

About Wiley Online Library

Help & Support

Opportunities

Connect with Wiley

Tools

Follow journal

Advances in Tribology

Filters

Filter by Keyword

Publication Date

ACCESS STATUS

Author

All Advances in Tribology Articles

Download PDFs

oa Tribological Performance of Laser-Based Surface Textured Nonconformal Contacts

oa On the Use of Taguchi Method in the Analysis of the Dynamic Response of Variable Bearing Design under Impact Load

oa Experimental Comparison of the Effect of Using Synthetic, Semi-Synthetic, and Mineral Engine Oil on Gasoline Engine Parts Wear

oa A Review on the Impact of Bio-Additives on Tribological Behavior of Diesel Fuels

oa Optimizing the Dry Sliding Wear Behavior of Stir-Casted Al6061/Nano-Al2O3/Quartz Hybrid Metal Matrix Composite Using Taguchi Method

oa Experimental and Numerical Investigation of Cavitation Assessment for Runner Blades in a Francis Turbine

oa Mathematical Modeling of the Bearing Ratio Curve Rmr (50% Rz), through Investigation of the Effect of Process Parameters in Hard Turning of Steel C55 (DIN) with Mixed Ceramics MC2 (Al2O3 + TiC)

oa Tribological and Mechanical Properties of Gradient Coating on Al2O3-Based Coating Produced by Detonation Spraying Methods

oa Investigation on the Cutting Force and Surface Quality in Harmonically Vibrated Broaching (HVB)

oa Influence of Spraying Parameters on the Structure and Tribological Properties of Cr3C2-NiCr Detonation Coatings

oa Assessment of the Conventional Acid-Clay Method in Reclaiming Waste Crankcase Lubricating Oil

oa Dynamic Processes of Self-Organization in Nonstationary Conditions of Friction

oa Tribological Behavior of Mild Steel under Canola Biolubricant Conditions

oa Tribological Behavior of Ni-Based WC-Co Coatings Deposited via Spray and Fuse Technique Varying the Oxygen Flow

oa Computer Simulation/Prediction of Wear in Mechanical Components

oa Experimental and Numerical Investigation about Small Clearance Journal Bearings under Static Load Conditions

oa Experimental and Molecular Level Analysis of the Tribological and Oxidative Properties of Chaulmoogra Oil

oa Experimental Investigation of the Diagnosis of Angular Contact Ball Bearings Using Acoustic Emission Method and Empirical Mode Decomposition

oa Tribological Behavior of Tool Steel Substrate and Solid Films against 304 BA Austenitic Stainless Steel under Dry Sliding

oa Estimation of the Oxidative Deterioration of Turbine Oil Using Membrane Patch Color

oa

Tribological Performance of Laser-Based Surface Textured Nonconformal Contacts

oa

On the Use of Taguchi Method in the Analysis of the Dynamic Response of Variable Bearing Design under Impact Load

oa

Experimental Comparison of the Effect of Using Synthetic, Semi-Synthetic, and Mineral Engine Oil on Gasoline Engine Parts Wear

oa

A Review on the Impact of Bio-Additives on Tribological Behavior of Diesel Fuels

oa

Optimizing the Dry Sliding Wear Behavior of Stir-Casted Al6061/Nano-Al₂O₃/Quartz Hybrid Metal Matrix Composite Using Taguchi Method

oa

Experimental and Numerical Investigation of Cavitation Assessment for Runner Blades in a Francis Turbine

oa

Mathematical Modeling of the Bearing Ratio Curve Rmr (50% Rz), through Investigation of the Effect of Process Parameters in Hard Turning of Steel C55 (DIN) with Mixed Ceramics MC2 (Al₂O₃ + TiC)

oa

Tribological and Mechanical Properties of Gradient Coating on Al₂O₃-Based Coating Produced by Detonation Spraying Methods

oa

Investigation on the Cutting Force and Surface Quality in Harmonically Vibrated Broaching (HVB)

oa

Influence of Spraying Parameters on the Structure and Tribological Properties of Cr₃C₂-NiCr Detonation Coatings

oa

Assessment of the Conventional Acid-Clay Method in Reclaiming Waste Crankcase Lubricating Oil

oa

Dynamic Processes of Self-Organization in Nonstationary Conditions of Friction

oa

Tribological Behavior of Mild Steel under Canola Biolubricant Conditions

oa

Tribological Behavior of Ni-Based WC-Co Coatings Deposited via Spray and Fuse Technique Varying the Oxygen Flow

oa

Computer Simulation/Prediction of Wear in Mechanical Components

oa

Experimental and Numerical Investigation about Small Clearance Journal Bearings under Static Load Conditions

oa

Experimental and Molecular Level Analysis of the Tribological and Oxidative Properties of Chaulmoogra Oil

oa

Experimental Investigation of the Diagnosis of Angular Contact Ball Bearings Using Acoustic Emission Method and Empirical Mode Decomposition

oa

Tribological Behavior of Tool Steel Substrate and Solid Films against 304 BA Austenitic Stainless Steel under Dry Sliding

oa

Estimation of the Oxidative Deterioration of Turbine Oil Using Membrane Patch Color