Article Index - International Journal of Rotating Machinery

All International Journal of Rotating Machinery Articles

Filters

41-60 of 788 results

Date

Export Citation(s)Download PDF(s)

Research Article
Open Access

oa

Numerical Analysis of Flow Field in Generator End-Winding Region
Wei Tong,

First published: 21 April 2008
Research Article
Open Access

oa

On the Flow Behavior in Rotor-Stator System with Superposed Flow
Roger Debuchy, Fadi Abdel Nour, Gérard Bois,

First published: 25 December 2008
Research Article
Open Access

oa

Observation and Analysis of Affinity Law Deviations through Tested Performance of Liquefied Gas Reaction Turbines
Sarah D. Alison-Youel,

First published: 24 November 2008
Research Article
Open Access

oa

Free Vibration Analysis of a Rotating Composite Shaft Using the p-Version of the Finite Element Method
A. Boukhalfa, A. Hadjoui, S. M. Hamza Cherif,

First published: 22 June 2008
Research Article
Open Access

oa

Effects of Centrifugal Buoyancy and Reynolds Number on Turbulent Heat Transfer in a Two-Pass Angled-RIB-Roughened Channel with Sharp 180^∘ Turns Investigated by Using Large Eddy Simulation
Akira Murata, Sadanari Mochizuki,

First published: 04 December 2008
Research Article
Open Access

oa

The Fisher Information Matrix as a Relevant Tool for Sensor Selection in Engine Health Monitoring
S. Borguet, O. Léonard,

First published: 22 October 2008
Research Article
Open Access

oa

Predicting the Onset of Cavitation in Automotive Torque Converters—Part I: Designs with Geometric Similitude
D. L. Robinette, J. M. Schweitzer, D. G. Maddock, C. L. Anderson, J. R. Blough, M. A. Johnson,

First published: 20 July 2008
Research Article
Open Access

oa

A Two-Disk Extended Jeffcott Rotor Model Distinguishing a Shaft Crack from Other Rotating Asymmetries
Xi Wu, Jim Meagher,

First published: 13 March 2008
Research Article
Open Access

oa

Influences of Tip Cooling Injection on Tip Clearance Control at Design and Off-Design Incidences
Maosheng Niu, Shusheng Zang,

First published: 08 October 2009
Research Article
Open Access

oa

Performance Improvement of Axial Compressors and Fans with Plasma Actuation
Sebastien Lemire, Huu Duc Vo, Michael W. Benner,

First published: 21 March 2010
Research Article
Open Access

oa

Multiresolution Wavelet Analysis of the Dynamics of a Cracked Rotor
Jerzy T. Sawicki, Asok K. Sen, Grzegorz Litak,

First published: 06 September 2009
Research Article
Open Access

oa

CFD Analysis on the Effect of Radial Gap on Impeller-Diffuser Flow Interaction as well as on the Flow Characteristics of a Centrifugal Fan
K. Vasudeva Karanth, N. Yagnesh Sharma,

First published: 27 April 2009
Research Article
Open Access

oa

A Modal-Based Substructure Method Applied to Nonlinear Rotordynamic Systems
Helmut J. Holl,

First published: 15 December 2009
Research Article
Open Access

oa

Numerical Estimation of Torsional Dynamic Coefficients of a Hydraulic Turbine
Martin Karlsson, Håkan Nilsson, Jan-Olov Aidanpää,

First published: 22 June 2009
Research Article
Open Access

oa

Comparison of Periodic Flow Fields in a Radial Pump among CFD, PIV, and LDV Results
Jianjun Feng, F.-K. Benra, H. J. Dohmen,

First published: 01 November 2009
Research Article
Open Access

oa

H-Darrieus Wind Turbine with Blade Pitch Control
I. Paraschivoiu, O. Trifu, F. Saeed,

First published: 27 May 2009
Research Article
Open Access

oa

Effects of Different Blade Angle Distributions on Centrifugal Compressor Performance
Pekka Röyttä, Aki Grönman, Ahti Jaatinen, Teemu Turunen-Saaresti, Jari Backman,

First published: 14 March 2010
Research Article
Open Access

oa

Experimental and Numerical Investigations of Air Cooling for a Large-Scale Motor
Chih-Chung Chang, Chiao-Hung Cheng, Ming-Tsun Ke, Sih-Li Chen,

First published: 01 July 2009
Research Article
Open Access

oa

Experimental Investigation of the Effect of Radial Gap and Impeller Blade Exit on Flow-Induced Vibration at the Blade-Passing Frequency in a Centrifugal Pump
A. Al-Qutub, A. Khalifa, Y. Khulief,

First published: 21 February 2010
Research Article
Open Access

oa

Some Considerations about the Rotating Cell Structure
Franco Nurzia, Chiara Palomba, Pierpaolo Puddu,

First published: 05 November 2009

Tools

Follow journal

International Journal of Rotating Machinery

Filters

All International Journal of Rotating Machinery Articles

oa

Numerical Analysis of Flow Field in Generator End-Winding Region

oa

On the Flow Behavior in Rotor-Stator System with Superposed Flow

oa

Observation and Analysis of Affinity Law Deviations through Tested Performance of Liquefied Gas Reaction Turbines

oa

Free Vibration Analysis of a Rotating Composite Shaft Using the p-Version of the Finite Element Method

oa

Effects of Centrifugal Buoyancy and Reynolds Number on Turbulent Heat Transfer in a Two-Pass Angled-RIB-Roughened Channel with Sharp 180^∘ Turns Investigated by Using Large Eddy Simulation

oa

The Fisher Information Matrix as a Relevant Tool for Sensor Selection in Engine Health Monitoring

oa

Predicting the Onset of Cavitation in Automotive Torque Converters—Part I: Designs with Geometric Similitude

oa

A Two-Disk Extended Jeffcott Rotor Model Distinguishing a Shaft Crack from Other Rotating Asymmetries

oa

Influences of Tip Cooling Injection on Tip Clearance Control at Design and Off-Design Incidences

oa

Performance Improvement of Axial Compressors and Fans with Plasma Actuation

oa

Multiresolution Wavelet Analysis of the Dynamics of a Cracked Rotor

oa

CFD Analysis on the Effect of Radial Gap on Impeller-Diffuser Flow Interaction as well as on the Flow Characteristics of a Centrifugal Fan

oa

A Modal-Based Substructure Method Applied to Nonlinear Rotordynamic Systems

oa

Numerical Estimation of Torsional Dynamic Coefficients of a Hydraulic Turbine

oa

Comparison of Periodic Flow Fields in a Radial Pump among CFD, PIV, and LDV Results

oa

H-Darrieus Wind Turbine with Blade Pitch Control

oa

Effects of Different Blade Angle Distributions on Centrifugal Compressor Performance

oa

Experimental and Numerical Investigations of Air Cooling for a Large-Scale Motor

oa

Experimental Investigation of the Effect of Radial Gap and Impeller Blade Exit on Flow-Induced Vibration at the Blade-Passing Frequency in a Centrifugal Pump

oa

Some Considerations about the Rotating Cell Structure

About Wiley Online Library

Help & Support

Opportunities

Connect with Wiley

Tools

Follow journal

International Journal of Rotating Machinery

Filters

Filter by Keyword

Publication Date

ACCESS STATUS

Author

All International Journal of Rotating Machinery Articles

Download PDFs

oa Numerical Analysis of Flow Field in Generator End-Winding Region

oa On the Flow Behavior in Rotor-Stator System with Superposed Flow

oa Observation and Analysis of Affinity Law Deviations through Tested Performance of Liquefied Gas Reaction Turbines

oa Free Vibration Analysis of a Rotating Composite Shaft Using the p-Version of the Finite Element Method

oa Effects of Centrifugal Buoyancy and Reynolds Number on Turbulent Heat Transfer in a Two-Pass Angled-RIB-Roughened Channel with Sharp 180∘ Turns Investigated by Using Large Eddy Simulation

oa The Fisher Information Matrix as a Relevant Tool for Sensor Selection in Engine Health Monitoring

oa Predicting the Onset of Cavitation in Automotive Torque Converters—Part I: Designs with Geometric Similitude

oa A Two-Disk Extended Jeffcott Rotor Model Distinguishing a Shaft Crack from Other Rotating Asymmetries

oa Influences of Tip Cooling Injection on Tip Clearance Control at Design and Off-Design Incidences

oa Performance Improvement of Axial Compressors and Fans with Plasma Actuation

oa Multiresolution Wavelet Analysis of the Dynamics of a Cracked Rotor

oa CFD Analysis on the Effect of Radial Gap on Impeller-Diffuser Flow Interaction as well as on the Flow Characteristics of a Centrifugal Fan

oa A Modal-Based Substructure Method Applied to Nonlinear Rotordynamic Systems

oa Numerical Estimation of Torsional Dynamic Coefficients of a Hydraulic Turbine

oa Comparison of Periodic Flow Fields in a Radial Pump among CFD, PIV, and LDV Results

oa H-Darrieus Wind Turbine with Blade Pitch Control

oa Effects of Different Blade Angle Distributions on Centrifugal Compressor Performance

oa Experimental and Numerical Investigations of Air Cooling for a Large-Scale Motor

oa Experimental Investigation of the Effect of Radial Gap and Impeller Blade Exit on Flow-Induced Vibration at the Blade-Passing Frequency in a Centrifugal Pump

oa Some Considerations about the Rotating Cell Structure

oa

Numerical Analysis of Flow Field in Generator End-Winding Region

oa

On the Flow Behavior in Rotor-Stator System with Superposed Flow

oa

Observation and Analysis of Affinity Law Deviations through Tested Performance of Liquefied Gas Reaction Turbines

oa

Free Vibration Analysis of a Rotating Composite Shaft Using the p-Version of the Finite Element Method

oa

Effects of Centrifugal Buoyancy and Reynolds Number on Turbulent Heat Transfer in a Two-Pass Angled-RIB-Roughened Channel with Sharp 180^∘ Turns Investigated by Using Large Eddy Simulation

oa

The Fisher Information Matrix as a Relevant Tool for Sensor Selection in Engine Health Monitoring

oa

Predicting the Onset of Cavitation in Automotive Torque Converters—Part I: Designs with Geometric Similitude

oa

A Two-Disk Extended Jeffcott Rotor Model Distinguishing a Shaft Crack from Other Rotating Asymmetries

oa

Influences of Tip Cooling Injection on Tip Clearance Control at Design and Off-Design Incidences

oa

Performance Improvement of Axial Compressors and Fans with Plasma Actuation

oa

Multiresolution Wavelet Analysis of the Dynamics of a Cracked Rotor

oa

CFD Analysis on the Effect of Radial Gap on Impeller-Diffuser Flow Interaction as well as on the Flow Characteristics of a Centrifugal Fan

oa

A Modal-Based Substructure Method Applied to Nonlinear Rotordynamic Systems

oa

Numerical Estimation of Torsional Dynamic Coefficients of a Hydraulic Turbine

oa

Comparison of Periodic Flow Fields in a Radial Pump among CFD, PIV, and LDV Results

oa

H-Darrieus Wind Turbine with Blade Pitch Control

oa

Effects of Different Blade Angle Distributions on Centrifugal Compressor Performance

oa

Experimental and Numerical Investigations of Air Cooling for a Large-Scale Motor

oa

Experimental Investigation of the Effect of Radial Gap and Impeller Blade Exit on Flow-Induced Vibration at the Blade-Passing Frequency in a Centrifugal Pump

oa

Some Considerations about the Rotating Cell Structure