The investigation was intended to produce the protein-enriched extruded snack by incorporation, comprising corn flour and defatted sesame flour. Experiment was executed using central composite rotatable design through four variables, feed moisture content (10–18%, w.b), defatted sesame flour (10%–40%), die head temperature (100–160°C), and screw speed (200–300 rpm). The quality of extrudates was evaluated by examining protein content, extrudate hardness, water solubility index, and water absorption index of the product as well as bulk density, expansion ratio, and sensory attribute. The results analysis revealed that defatted sesame flour significantly did utmost influence among tested variables followed by feed moisture content, die head temperature with screw speed. The admixture symmetry with standardized extrusion process amended nutritive class of corn flour-based extrudate in terms of protein content by 19.21 g/100 g.

Novelty impact statement

The defatted sesame flour (DSF) is residual; afterward, oil extraction was used for formulating novel protein-rich extrudate.
The impact of various operational and feed parameters has been investigated, standardized, and validated for formulating protein-augmented extrudate using response surface methodology.
The DSF can be utilized effectively in protein-rich corn-based extrudate development which has comparatively higher protein (19.21 g/100 g) content compare to the control.

CONFLICT OF INTEREST

The authors have no conflicts of interest to declare.

Open Research

DATA AVAILABILITY STATEMENT

The data that support the findings of this study are available from the corresponding author upon reasonable request.

REFERENCES

Agathian, G., Semwal, A. D., & Sharma, G. K. (2015). Optimization of barrel temperature and kidney bean flour percentage based on various physical properties of extruded snacks. Journal of Food Science and Technology, 52(7), 4113–4123. https://doi.org/10.1007/S13197-014-1483-7
10.1007/s13197-014-1483-7
CAS PubMed Google Scholar
Alam, D. M. S., & Pathania, D. S. (2012). Efficacy of extrusion process variables and its optimization for ready to eat defatted soy and carrot pomace incorporated wheat based snacks. International Journal of Scientific Research, 3(7), 225–227. https://doi.org/10.15373/22778179/JULY2014/70
10.15373/22778179/July2014/70
Google Scholar
Alam, M. S., Pathania, S., & Sharma, A. (2016). Optimization of the extrusion process for development of high fibre soybean-rice ready-to-eat snacks using carrot pomace and cauliflower trimmings. LWT - Food Science and Technology, 74, 135–144. https://doi.org/10.1016/J.LWT.2016.07.031
10.1016/j.lwt.2016.07.031
CAS Web of Science® Google Scholar
Awolu, O. O., Magoh, A. O., & Ojewumi, M. E. (2020). Development and evaluation of extruded ready-to-eat snack from optimized rice, kersting's groundnut and lemon pomace composite flours. Journal of Food Science and Technology, 57(1), 86–95. https://doi.org/10.1007/s13197-019-04033-9
10.1007/s13197-019-04033-9
CAS PubMed Google Scholar
Balasubramanian, S., Kaur, J., & Singh, D. (2014). Optimization of weaning mix based on malted and extruded pearl millet and barley. Journal of Food Science and Technology, 51(4), 682–690. https://doi.org/10.1007/s13197-011-0579-6
10.1007/s13197-011-0579-6
CAS PubMed Google Scholar
Banjac, V., Vukmirović, Đ., Pezo, L., Draganovic, V., Đuragić, O., & Čolović, R. (2021). Impact of variability in protein content of sunflower meal on the extrusion process and physical quality of the extruded salmonid feed. Journal of Food Process Engineering, 44(3). https://doi.org/10.1111/jfpe.13640
10.1111/jfpe.13640
Web of Science® Google Scholar
Chaiyakul, S., Jangchud, K., Jangchud, A., Wuttijumnong, P., & Winger, R. (2009). Effect of extrusion conditions on physical and chemical properties of high protein glutinous rice-based snack. LWT - Food Science and Technology, 42(3), 781–787. https://doi.org/10.1016/j.lwt.2008.09.011
10.1016/j.lwt.2008.09.011
CAS Web of Science® Google Scholar
Chanlat, N., Songsermpong, S., Charunuch, C., & Naivikul, O. (2011). Twin-screw extrusion of pre-germinated brown rice: Physicochemical properties and γ-aminobutyric acid content (GABA) of extruded snacks. International Journal of Food Engineering, 7(4), 1–18. https://doi.org/10.2202/1556-3758.2328
10.2202/1556-3758.2328
Google Scholar
Ganorkar, P. M., & Jain, R. K. (2015). Development of flaxseed fortified rice - corn flour blend based extruded product by response surface methodology. Journal of Food Science and Technology, 52(8), 5075–5083. https://doi.org/10.1007/s13197-014-1541-1
10.1007/s13197-014-1541-1
CAS PubMed Google Scholar
Ganorkar, P. M., Patel, J. M., Shah, V., & Rangrej, V. V. (2016). Defatted flaxseed meal incorporated corn-rice flour blend based extruded product by response surface methodology. Journal of Food Science and Technology, 53(4), 1867–1877. https://doi.org/10.1007/s13197-015-2134-3
10.1007/s13197-015-2134-3
CAS PubMed Google Scholar
Gojiya, D. (2020). Standardization of Technology for Preparation of Sani–A jaggery based crushed sesame. Scholarly Journal of Food and Nutrition, 3(2), 331–342. https://doi.org/10.32474/sjfn.2020.03.000157
10.32474/SJFN.2020.03.000157
Google Scholar
Gojiya, D., & Gohil, V. (2022). Design and development of low cost sesame dehuller and its process standardization. Journal of Food Science and Technology, 2022, 1–11. https://doi.org/10.1007/S13197-022-05524-Y
10.1007/S13197?022?05524?Y
Google Scholar
Gomez, M. H., & Aguilera, J. M. (1983). Changes in the starch fraction during extrusion-cooking of corn. Journal of Food Science, 48(2), 378–381. https://doi.org/10.1111/j.1365-2621.1983.tb10747.x
10.1111/j.1365-2621.1983.tb10747.x
Web of Science® Google Scholar
Guha, M., Zakiuddin Ali, S., & Bhattacharya, S. (1998). Effect of barrel temperature and screw speed on rapid viscoanalyser pasting behaviour of rice extrudate. International Journal of Food Science and Technology, 33(3), 259–266. https://doi.org/10.1046/J.1365-2621.1998.00189.X
10.1046/j.1365-2621.1998.00189.x
CAS Web of Science® Google Scholar
Gujral, H. S., Singh, N., & Singh, B. (2001). Extrusion behaviour of grits from flint and sweet corn. Food Chemistry, 74(3), 303–308. https://doi.org/10.1016/S0308-8146(01)00156-X
10.1016/S0308-8146(01)00156-X
CAS Web of Science® Google Scholar
Jozinović, A., Ačkar, D., Jokić, S., Babić, J., Balentić, J. P., Banožić, M., & Šubarić, D. (2017). Optimisation of extrusion variables for the production of corn snack products enriched with defatted hemp cake. Czech Journal of Food Sciences, 35(6), 507–516. doi:10.17221/83/2017-CJFS
10.17221/83/2017-CJFS
Web of Science® Google Scholar
Karun, G., Sukumar, A., Nagamaniammai, G., & Preetha, R. (2022). Development of multigrain ready-to-eat extruded snack and process parameter optimization using response surface methodology. Journal of Food Science and Technology. https://doi.org/10.1007/s13197-022-05390-8
10.1007/s13197?022?05390?8
PubMed Google Scholar
Kaur, A., Kaur, S., Singh, M., Singh, N., Shevkani, K., & Singh, B. (2015). Effect of banana flour, screw speed and temperature on extrusion behaviour of corn extrudates. Journal of Food Science and Technology, 52(7), 4276–4285. https://doi.org/10.1007/S13197-014-1524-2
10.1007/s13197-014-1524-2
CAS PubMed Google Scholar
Kaur, M., Singh, B., Kaur, A., & Singh, N. (2021). Proximate, mineral, amino acid composition, phenolic profile, antioxidant and functional properties of oilseed cakes. International Journal of Food Science & Technology, 56(12), 6732–6741. https://doi.org/10.1111/IJFS.15386
10.1111/ijfs.15386
CAS Web of Science® Google Scholar
Korkerd, S., Wanlapa, S., Puttanlek, C., Uttapap, D., & Rungsardthong, V. (2016). Expansion and functional properties of extruded snacks enriched with nutrition sources from food processing by-products. Journal of Food Science and Technology, 53(1), 561–570. https://doi.org/10.1007/S13197-015-2039-1
10.1007/s13197-015-2039-1
CAS PubMed Web of Science® Google Scholar
Koysuren, B., Oztop, M. H., & Mazi, B. G. (2021). Sesame seed as an alternative plant protein source: A comprehensive physicochemical characterisation study for alkaline, salt and enzyme-assisted extracted samples. International Journal of Food Science & Technology, 56(11), 5471–5484. https://doi.org/10.1111/IJFS.15229
10.1111/ijfs.15229
CAS Web of Science® Google Scholar
Kukadiya, V. D., Gojiya, D. K., Sojaliya, H. R., Moradiya, P. B. A., & Sharma, G. P. (2016). Optimization of infrared-convective drying process of ginger slices using response surface method (RSM). AGRES-An International e-Journal, 5, 39–51. www.arkgroup.co.in
Google Scholar
Kumar, N., Nath, N., & Arora, S. K. (2019). Process optimization and characterization of ‘sev’ (traditional Indian extruded snack) with the incorporation of mushroom powder. Journal of Food Science and Technology, 56(4), 1723–1731. https://doi.org/10.1007/s13197-019-03599-8
10.1007/s13197-019-03599-8
CAS PubMed Google Scholar
Maria Da Graça Costa Do Nascimento, E., Wanderlei, C., Carvalho, P., Takeiti, C. Y., De Grandi, D., Freitas, C., Luis, J., & Ascheri, R. (2012). Use of sesame oil cake (Sesamum indicum L.) on corn expanded extrudates. FRIN, 45, 434–443. https://doi.org/10.1016/j.foodres.2011.11.009
10.1016/j.foodres.2011.11.009
Web of Science® Google Scholar
Nikmaram, N., Garavand, F., Elhamirad, A., Beiraghi-Toosi, S., & Goli-Movahhed, G. (2015). Production of high quality expanded corn extrudates containing sesame seed using response surface methodology. Quality Assurance and Safety of Crops and Foods, 7(5), 713–720. https://doi.org/10.3920/QAS2014.0507
10.3920/QAS2014.0507
CAS Web of Science® Google Scholar
Niu, F., Li, M., Fan, J., Kou, M., Han, B., & Pan, W. (2020). Structural characteristics and digestibility of bovine skin protein and corn starch extruded blend complexes. Journal of Food Science and Technology, 57(3), 1041–1048. https://doi.org/10.1007/s13197-019-04137-2
10.1007/s13197-019-04137-2
PubMed Google Scholar
Omoba, O. (2013). Optimisation of plantain - Brewers' spent grain biscuit using response surface methodology. Journal of Scientific Research and Reports, 2(2), 665–681. https://doi.org/10.9734/JSRR/2013/4944
10.9734/JSRR/2013/4944
Google Scholar
Pensamiento-Niño, C. A., Gómez-Aldapa, C. A., Hernández-Santos, B., Juárez-Barrientos, J. M., Herman-Lara, E., Martínez-Sánchez, C. E., Torruco-Uco, J. G., & Rodríguez-Miranda, J. (2018). Optimization and characterization of an extruded snack based on taro flour (Colocasia esculenta L.) enriched with mango pulp (Mangifera indica L.). Journal of Food Science and Technology, 55(10), 4244–4255. https://doi.org/10.1007/s13197-018-3363-z
10.1007/s13197-018-3363-z
CAS PubMed Google Scholar
Ranganna, S. (1986). Handbook of analysis and quality control for fruit and vegetable products. Tata McGraw-Hill Publishing Company. https://books.google.com/books/about/Handbook_of_Analysis_and_Quality_Control.html?id=jQN8Kpj0UOMC
Google Scholar
Ruiz-Armenta, X. A., Zazueta-Morales, J. D. J., Aguilar-Palazuelos, E., Delgado-Nieblas, C. I., López-Diaz, A., Camacho-Hernández, I. L., Gutiérrez-Dorado, R., & Martínez-Bustos, F. (2018). Efecto de la extrusión sobre el contenido de carotenoides, propiedades físicas y sensoriales de alimentos botana adicionados con bagazo del fruto de naranjita: optimización del proceso. CYTA - Journal of Food, 16(1), 172–180. https://doi.org/10.1080/19476337.2017.1368717
10.1080/19476337.2017.1368717
CAS Web of Science® Google Scholar
Sahu, C., & Patel, S. (2021). Optimization of maize-millet based soy fortified composite flour for preparation of RTE extruded products using D-optimal mixture design. Journal of Food Science and Technology, 58(7), 2651–2660. https://doi.org/10.1007/s13197-020-04771-1
10.1007/s13197-020-04771-1
CAS PubMed Google Scholar
Sukumar, A., & Athmaselvi, K. A. (2019). Optimization of process parameters for the development of finger millet based multigrain extruded snack food fortified with banana powder using RSM. Journal of Food Science and Technology, 56(2), 705–712. https://doi.org/10.1007/s13197-018-3527-x
10.1007/s13197-018-3527-x
CAS PubMed Google Scholar
Thakur, S., Singh, N., Kaur, A., & Singh, B. (2017). Effect of extrusion on physicochemical properties, digestibility, and phenolic profiles of grit fractions obtained from dry milling of Normal and waxy corn. Journal of Food Science, 82(5), 1101–1109. https://doi.org/10.1111/1750-3841.13692
10.1111/1750-3841.13692
CAS PubMed Web of Science® Google Scholar
Wang, L., Duan, W., Zhou, S., Qian, H., Zhang, H., & Qi, X. (2016). Effects of extrusion conditions on the extrusion responses and the quality of brown rice pasta. Food Chemistry, 204, 320–325. https://doi.org/10.1016/J.FOODCHEM.2016.02.053
10.1016/j.foodchem.2016.02.053
CAS PubMed Web of Science® Google Scholar
Wu, M., Sun, Y., Bi, C., Ji, F., Li, B., & Xing, J. (2018). Effects of extrusion conditions on the physicochemical properties of soy protein/gluten composite. International Journal of Agricultural and Biological Engineering, 11(4), 205–210. https://doi.org/10.25165/j.ijabe.20181104.4162
10.25165/j.ijabe.20181104.4162
Web of Science® Google Scholar
Yaǧci, S., & Göǧüş, F. (2008). Response surface methodology for evaluation of physical and functional properties of extruded snack foods developed from food-by-products. Journal of Food Engineering, 86(1), 122–132. https://doi.org/10.1016/J.JFOODENG.2007.09.018
10.1016/j.jfoodeng.2007.09.018
CAS Web of Science® Google Scholar
Şahin, S., & Elhussein, E. A. A. (2018). Assessment of sesame (Sesamum indicum L.) cake as a source of high-added value substances: From waste to health. Phytochemistry Reviews, 17(4), 691–700. https://doi.org/10.1007/s11101-018-9554-4
10.1007/s11101-018-9554-4
CAS Web of Science® Google Scholar

Citing Literature

All articles

Process standardization for formulating protein-augmented corn-based extrudates using defatted sesame flour (DSF): Sesame oil industry waste valorization

Abstract

Novelty impact statement

CONFLICT OF INTEREST

Open Research

DATA AVAILABILITY STATEMENT

REFERENCES

Citing Literature

References

Information

About Wiley Online Library

Help & Support

Opportunities

Connect with Wiley

Process standardization for formulating protein-augmented corn-based extrudates using defatted sesame flour (DSF): Sesame oil industry waste valorization

Abstract

Novelty impact statement

CONFLICT OF INTEREST

Open Research

DATA AVAILABILITY STATEMENT

REFERENCES

Citing Literature

References

Related

Information