Volume 46, Issue 12 e17141
ORIGINAL ARTICLE

Energy and exergy analysis of the temperature and relative humidity controlled infrared convective walnut drying

Gülşah Karaca Dolgun

Corresponding Author

Gülşah Karaca Dolgun

Gazi University, Natural and Applied Science Institute, Ankara, Turkey

Energy Systems Engineering, Technology Faculty, Muğla Sıtkı Koçman University, Muğla, Turkey

Correspondence

Gülşah Karaca Dolgun, Gazi University, Natural and Applied Science Institute, Ankara, Turkey.

Email: [email protected]

Search for more papers by this author
Mustafa Aktaş

Mustafa Aktaş

Energy Systems Engineering, Technology Faculty, Gazi University, Ankara, Turkey

Search for more papers by this author
Betül Oskaybaş Emlek

Betül Oskaybaş Emlek

Food Engineering, Engineering Faculty, Niğde Ömer Halisdemir University, Niğde, Turkey

Search for more papers by this author
Hakan Erinç

Hakan Erinç

Food Engineering, Engineering Faculty, Niğde Ömer Halisdemir University, Niğde, Turkey

Search for more papers by this author
Ekin Can Dolgun

Ekin Can Dolgun

Gazi University, Natural and Applied Science Institute, Ankara, Turkey

Search for more papers by this author
First published: 10 September 2022
Citations: 4

Abstract

In this study, energy and exergy analyses of the closed-cycle infrared (IR) convective walnut drying were performed. The effects of the combined heat transfer, product–source distance, and temperature–relative humidity (RH) control on the food quality of walnuts and performance were investigated. Experiments were conducted with and without an IR lamp. The temperature and RH of the drying air were set at 40°C and 20%, respectively. The distance between the product and the IR source was changed to 20 cm and 30 cm. The coefficient of performance values of the whole system changed between 1.56 and 2.34. Exergy efficiencies varied between 60.81% and 88.19% without IR and 72.73%–78.54% with IR. Energy and time savings increased by 14.7% and 26.1%, respectively, with using IR at a 20 cm distance compared with the convective system. The fatty acid composition of walnut samples and chemical properties of walnut samples such as total phenolic content, oil, ash, color, antioxidant activity, peroxide values, free fatty acid, conjugated trienes, conjugated dienes, saponification value, and iodine number parameters were analyzed. Food analysis results of all dried walnuts were in the acceptable range. As a result, energy and time savings were achieved with the desired food quality.

Novelty impact statement

This application makes it possible to achieve the desired conditions with less energy. In this study, the effects of heat transfer mechanisms, the effect of using two mechanisms together, and the effects of the variables within each mechanism on the drying of walnuts were investigated. It has been observed that the addition of an infrared heat source with the right and suitable application shortens the drying time as well as saves energy. As a result of the food quality analysis, it was determined that all products dried without deteriorating the food quality. The closed-cycle intermittent infrared convective drying system is recommended for industrial use.

CONFLICT OF INTEREST

The authors have declared no conflicts of interest for this article.

DATA AVAILABILITY STATEMENT

Author elects to not share data.

The full text of this article hosted at iucr.org is unavailable due to technical difficulties.