Journal of Applied Polymer Science: Vol 29, No 12

I consent to Wiley Online Library’s Terms of Use and processing of my personal data as disclosed in Wiley’s Privacy Policy.I consent to my personal information being transferred outside of the People’s Republic of China as laid out in Wiley’s Privacy Policy.*(Optional) I consent to special offers, newsletter & promotions from Wiley. See Privacy Policy for more details.

Tools

Submit an article

Journal Metrics

Subscribe to this journal

Journal of Applied Polymer Science

Journal list menu

Tools

Follow journal

Journal of Applied Polymer Science: Volume 29, Issue 12

Download PDFs

Articles

Improvement of hydrophilicity of polypropylene by liquid-phase mutual irradiation of acrylics

Surface characterization of styrene/2-hydroxyethyl methacrylate copolymer latex

Application of thermal conductivity detection for investigating the diffusion of component X in the system: A mixture of vapors of X and Y substances–polymer membrane–Y substance vapor

Characterization of some poly(methyl methacrylate) prepared by emulsion polymerization in presence of egyptian delta titano magnetite ore (EDTMO)

Emulsion polymerization of methyl methacrylate in the presence of burnt mazote boiler deposit

Epoxy resin cure. I. Fluorine-19 NMR of boron trifluoride monoethylamine and fluoroboric acid

Epoxy resin cure. II. FTIR analysis

Structure–property relationship in heat-set poly(ethylene terephthalate) fibers. II. Thermal behavior and morphology

Molecular characterization of hydroxyl-terminated polybutadienes

Cation exchange resin from phosphorylated N-vinylcarbazole formaldehyde copolymer

Mark–Houwink equation and GPC calibration for linear short-chain branched polyolefines, including polypropylene and ethylene–propylene copolymers

Effects of copper and molybdenum oxides on the pyrolysis of model compounds of poly(vinyl chloride)

Complexation of samarium ion with poly(acrylic acid) grafted onto polyethylene by radiation-induced method

The mechanism for enhanced autoadhesion in azoester-modified polybutadienes

X-ray analysis of α-, β-, and γ-phase Ag–Hg alloy films produced on polymer substrates by casting polyacrylamide–AgNO3 aqueous solution in Hg atmosphere

Resins containing extractants: Morphology of polymers prepared by polymerization of vinyl monomers in the presence of uranium-selective extractants

Phase behavior of binary mixtures of oligomeric styrene/allyl alcohol copolymers and aliphatic polyesters

Saturated and unsaturated polyesters based on 1,3-(dicarboxymethoxy)benzene

Size exclusion chromatography of urea formaldehyde resins in dimethylformamide containing lithium chloride

Preparation of tri-O-substituted cellulose ethers by the use of a nonaqueous cellulose solvent

Use of polymer-bound metals as fire retardants in polyethylene–silicon blends

Mechanical properties of paper sheets prepared from carbamoylethylated wood pulp

A “chain fold band” in the infrared spectra of nylon 6

Force–temperature behavior of rigid rod polymeric fibers

Mechanical coagulation in emulsion polymerizations

Resistivity behavior of carbon-black-filled silicone rubber in cyclic loading experiments

Depolymerization of nylon 6: Some kinetic modeling aspects

Membrane structure and permeation properties of poly(vinyl chloride)/liquid crystal composite membrane

Surface characterization of intact fibers by inverse gas chromatography

Dielectric properties of cellulose acylates

Interactions between dyes and polyelectrolytes: Effect of polymer–polymer interactions

Properties of syndiotacticity-rich poly(vinyl alcohol) thin film in water. I. Effect of the load on the extension of untreated thin film in water

Synthesis and transport properties of thin film composite membranes. I. Synthesis of poly(phenylene oxide) polymer and its sulfonation

Synthesis and transport properties of thin film composite membranes. II. Preparation of sulfonated poly(phenylene oxide) thin film composite membranes for the purification of alberta tar sands waste waters

Synthesis and characterization of BDSDA/APB polyimide

Bulk resilience of fibers

Depolymerization of fluoroalkyl methacrylate polymers as studied with thermogravimetry

Rheological behavior of epoxy acrylate prepolymer during UV curing

Thermal stability, fractionation, and chemical modification of chlorinated rubbers. I. Infrared and 13C-NMR study of the structure of chlorinated natural rubber modified under various experimental conditions

Chemical modification of chlorinated rubbers. II. Study of chlorinated natural rubber modified by amino–esters

Effect of absorbed water on dynamic modulus for short fiber–CR composites

Photolysis of poly(3-buten-2-one), poly(4,4-dimethyl-1-penten-3-one), and poly(3-methyl-3-buten-2-one) in the presence of oxygen

Effect of the thermal histories on case II sorption kinetics: Test of a kinetic theory for swelling

Photodegradation kinetics of methyl salicylate in poly(methyl methacrylate)

Dependence of electrical breakdown on spherulite size in isotactic polypropylene

Structure–property relationship in heat-set poly(ethylene terephthalate) fibers. III. Stress–relaxation behavior

Structure–property relationship in heat-set poly(ethylene terephthalate) fibers. IV. Recovery behavior

Surface studies of polystyrene–poly(methyl methacrylate) diblock copolymers precipitated by different precipitants

Effect of stirring on cellulose graft copolymerization. III. Acrylic and methacrylic monomers

Bimodal crystalline orientation in polypropylene: Mechanism of formation

The ring-opening polymerization of D,L-lactide in the melt initiated with tetraphenyltin

Compatibility of polypeptide blends of poly(γ-butyl glutamate)/poly(γ-benzyl glutamate)

Kinetics of phthalic anhydride/ethylene carbonate reactions

Structural differences exhibited by networks prepared by chemical and photochemical reactions. III. Characterization by inverse GPC

The effect of coatings on the surface precipitation of oilgomeric crystals in poly(ethylene terephthalate) films

Mechanical properties of paper sheets prepared from partially cyanoethylated wood pulp

Polymer surface reconstruction by diffusion of organic functional groups from and to the surface

Relationship between electron sensitivity and chemical structures of polymers as EB resists. III. Electron sensitivity of various polyamides using 3-amino perhydroazepine

Viscosity–molecular weight relationships for poly(ethylene terephthalate) in hexafluoroisopropanol–pentafluorophenol using SEC–LALLS

Structural changes in polyester fibers during fatigue

Crystalline morphology of polypropylene and rubber-modified polypropylene

Notes

Hydrolysis of dextrin in a reversed micelle: Dependence of some behaviors of the micelle on the medium

Cure mechanism of a modified nitrile epoxy adhesive

The effect of freeze–thaw cycling on some structural film adhesives

Ultimate properties of filled bimodal networks containing a nonvolatile diluent

Fiber orientation effects in supported adhesives

Stabilizing additives for polypropylenes prepared by solventless processes

Viscosity–temperature relationships for dilute solutions of poly(cyclohexyl methacrylate) in methyl isobutyl ketone

Improved polyaniline coatings by in situ electropolymerization

Studies on the compatibility of poly(styrene-co-vinyl-phenyl hexafluorodimethyl carbinol) with nylon 6,12 and N,N′-dimethyl-substituted nylon 6,12

Graft polymerizations of acrylonitrile and methyl acrylate onto starch and cellulose at different stirring speeds

Multiphase elastomeric networks prepared from poly(dimethylsiloxane) and butadiene–acrylonitrile copolymer

X-ray analysis of α-, β-, and γ-phase Ag–Hg alloy films produced on polymer substrates by casting polyacrylamide–AgNO₃ aqueous solution in Hg atmosphere

Thermal stability, fractionation, and chemical modification of chlorinated rubbers. I. Infrared and ¹³C-NMR study of the structure of chlorinated natural rubber modified under various experimental conditions