Article Index - Advances in Tribology

All Advances in Tribology Articles

Filters

61-80 of 166 results

Relevance

Export Citation(s)Download PDF(s)

Research Article
Open Access

oa

Process Optimization and Wear Behavior of Red Mud Reinforced Aluminum Composites
Rajesh Shanmugavel, Thirumalai Kumaran Sundaresan, Uthayakumar Marimuthu, Pethuraj Manickaraj,

First published: 26 January 2016
Research Article
Open Access

oa

A Quality Function Deployment-Based Model for Cutting Fluid Selection
Kanika Prasad, Shankar Chakraborty,

First published: 21 January 2016
Research Article
Open Access

oa

The Application of Response Surface Methodology in the Investigation of the Tribological Behavior of Palm Cooking Oil Blended in Engine Oil
M. H. Sakinah, A. K. Amirruddin, K. Kadirgama, D. Ramasamy, M. M. Rahman, M. M. Noor,

First published: 19 January 2016
Research Article
Open Access

oa

Influence of Eta-Phase on Wear Behavior of WC-Co Carbides
A. Formisano, F. Capece Minutolo, A. Caraviello, L. Carrino, M. Durante, A. Langella,

First published: 03 January 2016
Research Article
Open Access

oa

Experimental Evaluation of Erosion of Gunmetal under Asymmetrical Shaped Sand Particle
Mohammad Asaduzzaman Chowdhury, Uttam Kumar Debnath, Dewan Muhammad Nuruzzaman, Md. Monirul Islam,

First published: 07 December 2015
Research Article
Open Access

oa

Microstructure Characteristics and Properties of HVOF Sprayed Ni-Based Alloy Nano-h-BN Self-Lubricating Composite Coatings
Xiaofeng Zhang, Long Zhang, Zhenyi Huang,

First published: 25 November 2015
Research Article
Open Access

oa

A New Design of the Universal Test Rig to Measure the Wear Characterizations of Polymer Acetal Gears (Spur, Helical, Bevel, and Worm)
Samy Yousef, T. A. Osman, M. Khattab, Ahmed A. Bahr, Ahmed M. Youssef,

First published: 03 September 2015
Research Article
Open Access

oa

Effect of L/D Ratio on the Performance of Two-Lobe Pressure Dam Bearing: Micropolar Lubricated
Sanyam Sharma, C. M. Krishna,

First published: 25 February 2015
Research Article
Open Access

oa

Couple Stress Squeeze Films with VPD in a Curved Circular Geometry
Vimala Ponnuswamy, Sumathi Govindaraj,

First published: 11 February 2015
Research Article
Open Access

oa

Effect of Surface Roughness on the Squeeze Film Characteristics of Circular Plates in the Presence of Conducting Couplestress Fluid and Transverse Magnetic Field
Syeda Tasneem Fathima, N. B. Naduvinamani, J. Santhosh Kumar, B. N. Hanumagowda,

First published: 29 January 2015
Research Article
Open Access

oa

Prediction and Analysis of Engine Friction Power of a Diesel Engine Influenced by Engine Speed, Load, and Lubricant Viscosity
Devendra Singh, Fengshou Gu, John D. Fieldhouse, Nishan Singh, S. K. Singal,

First published: 09 December 2014
Research Article
Open Access

oa

Dynamic Mechanical Analysis and Three-Body Abrasive Wear Behaviour of Thermoplastic Copolyester Elastomer Composites
Hemanth Rajashekaraiah, Sekar Mohan, Pramoda Kumari Pallathadka, Suresha Bhimappa,

First published: 19 November 2014
Research Article
Open Access

oa

Jet-Impingement Effects of Alumina-Nanofluid on Aluminum and Copper
Gustavo J. Molina, Fnu Aktaruzzaman, Whitney Stregles, Valentin Soloiu, Mosfequr Rahman,

First published: 21 August 2014
Research Article
Open Access

oa

Tribological behavior of Ti-6Al-4V and Ti-6Al-7Nb Alloys for Total Hip Prosthesis
Mamoun Fellah, Mohamed Labaïz, Omar Assala, Leila Dekhil, Ahlem Taleb, Hadda Rezag, Alain Iost,

First published: 21 July 2014
Research Article
Open Access

oa

Effect of Surface Roughness and Viscosity-Pressure Dependency on the Couple Stress Squeeze Film Characteristics of Parallel Circular Plates
Neminath Bhujappa Naduvinamani, Siddangouda Apparao, Ayyappa G. Hiremath,

First published: 25 May 2014
Research Article
Open Access

oa

Studies on Erosion Behavior of Plasma Sprayed Coatings of Glass Microspheres Premixed with Al₂O₃ Particles
Gaurav Gupta, Alok Satapathy,

First published: 31 March 2014
Research Article
Open Access

oa

Characterization and Empirical Modelling of Sliding Wear on Sintered Aluminium-Graphite Composites
Amrishraj Doraisamy, Senthilvelan Thiagarajan,

First published: 30 March 2014
Research Article
Open Access

oa

Analysis of Tribological Behavior of Carbon Nanotube Based Industrial Mineral Gear Oil 250 cSt Viscosity
Shubrajit Bhaumik, S. Prabhu, Kingsly Jeba Singh,

First published: 13 March 2014
Research Article
Open Access

oa

Solid Particle Erosion of Date Palm Leaf Fiber Reinforced Polyvinyl Alcohol Composites
Jyoti R. Mohanty, Sankar N. Das, Harish C. Das, Tapan K. Mahanta, Sataya B. Ghadei,

First published: 22 January 2014
Research Article
Open Access

oa

Effect of Nanoadditives with Surfactant on the Surface Characteristics of Electroless Nickel Coating on Magnesium-Based Composites Reinforced with MWCNT
Ranganathan Dhinakaran, Rasu Elansezhian, Arunachalam Arumugam Lalitha,

First published: 29 December 2013

Tools

Follow journal

Advances in Tribology

Filters

All Advances in Tribology Articles

oa

Process Optimization and Wear Behavior of Red Mud Reinforced Aluminum Composites

oa

A Quality Function Deployment-Based Model for Cutting Fluid Selection

oa

The Application of Response Surface Methodology in the Investigation of the Tribological Behavior of Palm Cooking Oil Blended in Engine Oil

oa

Influence of Eta-Phase on Wear Behavior of WC-Co Carbides

oa

Experimental Evaluation of Erosion of Gunmetal under Asymmetrical Shaped Sand Particle

oa

Microstructure Characteristics and Properties of HVOF Sprayed Ni-Based Alloy Nano-h-BN Self-Lubricating Composite Coatings

oa

A New Design of the Universal Test Rig to Measure the Wear Characterizations of Polymer Acetal Gears (Spur, Helical, Bevel, and Worm)

oa

Effect of L/D Ratio on the Performance of Two-Lobe Pressure Dam Bearing: Micropolar Lubricated

oa

Couple Stress Squeeze Films with VPD in a Curved Circular Geometry

oa

Effect of Surface Roughness on the Squeeze Film Characteristics of Circular Plates in the Presence of Conducting Couplestress Fluid and Transverse Magnetic Field

oa

Prediction and Analysis of Engine Friction Power of a Diesel Engine Influenced by Engine Speed, Load, and Lubricant Viscosity

oa

Dynamic Mechanical Analysis and Three-Body Abrasive Wear Behaviour of Thermoplastic Copolyester Elastomer Composites

oa

Jet-Impingement Effects of Alumina-Nanofluid on Aluminum and Copper

oa

Tribological behavior of Ti-6Al-4V and Ti-6Al-7Nb Alloys for Total Hip Prosthesis

oa

Effect of Surface Roughness and Viscosity-Pressure Dependency on the Couple Stress Squeeze Film Characteristics of Parallel Circular Plates

oa

Studies on Erosion Behavior of Plasma Sprayed Coatings of Glass Microspheres Premixed with Al₂O₃ Particles

oa

Characterization and Empirical Modelling of Sliding Wear on Sintered Aluminium-Graphite Composites

oa

Analysis of Tribological Behavior of Carbon Nanotube Based Industrial Mineral Gear Oil 250 cSt Viscosity

oa

Solid Particle Erosion of Date Palm Leaf Fiber Reinforced Polyvinyl Alcohol Composites

oa

Effect of Nanoadditives with Surfactant on the Surface Characteristics of Electroless Nickel Coating on Magnesium-Based Composites Reinforced with MWCNT

About Wiley Online Library

Help & Support

Opportunities

Connect with Wiley

Tools

Follow journal

Advances in Tribology

Filters

Filter by Keyword

Publication Date

ACCESS STATUS

Author

All Advances in Tribology Articles

Download PDFs

oa Process Optimization and Wear Behavior of Red Mud Reinforced Aluminum Composites

oa A Quality Function Deployment-Based Model for Cutting Fluid Selection

oa The Application of Response Surface Methodology in the Investigation of the Tribological Behavior of Palm Cooking Oil Blended in Engine Oil

oa Influence of Eta-Phase on Wear Behavior of WC-Co Carbides

oa Experimental Evaluation of Erosion of Gunmetal under Asymmetrical Shaped Sand Particle

oa Microstructure Characteristics and Properties of HVOF Sprayed Ni-Based Alloy Nano-h-BN Self-Lubricating Composite Coatings

oa A New Design of the Universal Test Rig to Measure the Wear Characterizations of Polymer Acetal Gears (Spur, Helical, Bevel, and Worm)

oa Effect of L/D Ratio on the Performance of Two-Lobe Pressure Dam Bearing: Micropolar Lubricated

oa Couple Stress Squeeze Films with VPD in a Curved Circular Geometry

oa Effect of Surface Roughness on the Squeeze Film Characteristics of Circular Plates in the Presence of Conducting Couplestress Fluid and Transverse Magnetic Field

oa Prediction and Analysis of Engine Friction Power of a Diesel Engine Influenced by Engine Speed, Load, and Lubricant Viscosity

oa Dynamic Mechanical Analysis and Three-Body Abrasive Wear Behaviour of Thermoplastic Copolyester Elastomer Composites

oa Jet-Impingement Effects of Alumina-Nanofluid on Aluminum and Copper

oa Tribological behavior of Ti-6Al-4V and Ti-6Al-7Nb Alloys for Total Hip Prosthesis

oa Effect of Surface Roughness and Viscosity-Pressure Dependency on the Couple Stress Squeeze Film Characteristics of Parallel Circular Plates

oa Studies on Erosion Behavior of Plasma Sprayed Coatings of Glass Microspheres Premixed with Al2O3 Particles

oa Characterization and Empirical Modelling of Sliding Wear on Sintered Aluminium-Graphite Composites

oa Analysis of Tribological Behavior of Carbon Nanotube Based Industrial Mineral Gear Oil 250 cSt Viscosity

oa Solid Particle Erosion of Date Palm Leaf Fiber Reinforced Polyvinyl Alcohol Composites

oa Effect of Nanoadditives with Surfactant on the Surface Characteristics of Electroless Nickel Coating on Magnesium-Based Composites Reinforced with MWCNT

oa

Process Optimization and Wear Behavior of Red Mud Reinforced Aluminum Composites

oa

A Quality Function Deployment-Based Model for Cutting Fluid Selection

oa

The Application of Response Surface Methodology in the Investigation of the Tribological Behavior of Palm Cooking Oil Blended in Engine Oil

oa

Influence of Eta-Phase on Wear Behavior of WC-Co Carbides

oa

Experimental Evaluation of Erosion of Gunmetal under Asymmetrical Shaped Sand Particle

oa

Microstructure Characteristics and Properties of HVOF Sprayed Ni-Based Alloy Nano-h-BN Self-Lubricating Composite Coatings

oa

A New Design of the Universal Test Rig to Measure the Wear Characterizations of Polymer Acetal Gears (Spur, Helical, Bevel, and Worm)

oa

Effect of L/D Ratio on the Performance of Two-Lobe Pressure Dam Bearing: Micropolar Lubricated

oa

Couple Stress Squeeze Films with VPD in a Curved Circular Geometry

oa

Effect of Surface Roughness on the Squeeze Film Characteristics of Circular Plates in the Presence of Conducting Couplestress Fluid and Transverse Magnetic Field

oa

Prediction and Analysis of Engine Friction Power of a Diesel Engine Influenced by Engine Speed, Load, and Lubricant Viscosity

oa

Dynamic Mechanical Analysis and Three-Body Abrasive Wear Behaviour of Thermoplastic Copolyester Elastomer Composites

oa

Jet-Impingement Effects of Alumina-Nanofluid on Aluminum and Copper

oa

Tribological behavior of Ti-6Al-4V and Ti-6Al-7Nb Alloys for Total Hip Prosthesis

oa

Effect of Surface Roughness and Viscosity-Pressure Dependency on the Couple Stress Squeeze Film Characteristics of Parallel Circular Plates

oa

Studies on Erosion Behavior of Plasma Sprayed Coatings of Glass Microspheres Premixed with Al₂O₃ Particles

oa

Characterization and Empirical Modelling of Sliding Wear on Sintered Aluminium-Graphite Composites

oa

Analysis of Tribological Behavior of Carbon Nanotube Based Industrial Mineral Gear Oil 250 cSt Viscosity

oa

Solid Particle Erosion of Date Palm Leaf Fiber Reinforced Polyvinyl Alcohol Composites

oa

Effect of Nanoadditives with Surfactant on the Surface Characteristics of Electroless Nickel Coating on Magnesium-Based Composites Reinforced with MWCNT