Article Index - International Journal of Rotating Machinery

All International Journal of Rotating Machinery Articles

Filters

101-120 of 788 results

Relevance

Export Citation(s)Download PDF(s)

Research Article
Open Access

oa

Aerodynamic Optimization Design of a Multistage Centrifugal Steam Turbine and Its Off-Design Performance Analysis
Hui Li, Dian-Gui Huang,

First published: 27 September 2017
Research Article
Open Access

oa

Optimal Sizing for Wind/PV/Battery System Using Fuzzy c-Means Clustering with Self-Adapted Cluster Number
Xin Liu, Hong-Kun Chen, Bing-Qing Huang, Yu-Bo Tao,

First published: 26 September 2017

Collections: Wind Generation Systems including Energy Storage
Research Article
Open Access

oa

Observations of the Growth and Decay of Stall Cells during Stall and Surge in an Axial Compressor
Adam R. Hickman, Scott C. Morris,

First published: 13 September 2017

Collections: Compressor Rotating Stall, Surge, and Its Control
Research Article
Open Access

oa

Bubble Flow Analysis of High Speed Cylindrical Roller Bearing under Fluid-Solid Thermal Coupling
Li Cui, Wenxia Wang, Zhang Yanlei,

First published: 13 September 2017
Research Article
Open Access

oa

Theoretical Model for the Performance of Liquid Ring Pump Based on the Actual Operating Cycle
Si Huang, Jing He, Xueqian Wang, Guangqi Qiu,

First published: 28 August 2017
Research Article
Open Access

oa

Variable Ratio Hydrostatic Transmission Simulator for Optimal Wind Power Drivetrains
Jose M. Garcia-Bravo, Ivo N. Ayala-Garcia, Juan L. Cepeda-Aguilar,

First published: 28 August 2017

Collections: Wind Generation Systems including Energy Storage
Research Article
Open Access

oa

Observations on Rotating Instabilities and Spike Type Stall Inception in a High-Speed Multistage Compressor
Johannes Schreiber, Benoit Paoletti, Xavier Ottavy,

First published: 28 August 2017

Collections: Compressor Rotating Stall, Surge, and Its Control
Research Article
Open Access

oa

Numerical Investigation of Fluid Flow and Performance Prediction in a Fluid Coupling Using Large Eddy Simulation
Wei Cai, Yuan Li, Xingzhong Li, Chunbao Liu,

First published: 21 August 2017
Research Article
Open Access

oa

Study on Frequency Characteristics of Rotor Systems for Fault Detection Using Variational Mode Decomposition
Kai Chen, Xin-Cong Zhou, Jun-Qiang Fang, Li Qin,

First published: 14 August 2017

Collections: Multifault Detection, Diagnosis, and Prognosis for Rotating Machinery
Research Article
Open Access

oa

Investigation of Performance and Rotor Tip Flow Field in a Low Speed Research Compressor with Circumferential Groove Casing Treatment at Varying Tip Clearance
Matthias Rolfes, Martin Lange, Ronald Mailach,

First published: 31 July 2017

Collections: Compressor Rotating Stall, Surge, and Its Control
Research Article
Open Access

oa

Effects of Geometry Design Parameters on the Static Strength and Dynamics for Spiral Bevel Gear
Zhiheng Feng, Chaosheng Song,

First published: 31 July 2017
Research Article
Open Access

oa

The Impact of Convective Fluid Inertia Forces on Operation of Tilting-Pad Journal Bearings
Thomas Hagemann, Christopher Zeh, Maximilian Prölß, Hubert Schwarze,

First published: 11 July 2017
Research Article
Open Access

oa

A Comparison of Off-Grid-Pumped Hydro Storage and Grid-Tied Options for an IRSOFC-HAWT Power Generator
Mahdi Majidniya, Kobra Gharali, Kaamran Raahemifar,

First published: 10 July 2017

Collections: Wind Generation Systems including Energy Storage
Research Article
Open Access

oa

Application of Artificial Neural Networks to Calculation of Oil Film Reaction Forces and Dynamics of Rotors on Journal Bearings
Alexey V. Kornaev, Nickolay V. Kornaev, Elena P. Kornaeva, Leonid A. Savin,

First published: 04 July 2017
Research Article
Open Access

oa

Enhancing LVRT Capability of DFIG-Based Wind Turbine Systems with SMES Series in the Rotor Side
Xiao Zhou, Yuejin Tang, Jing Shi,

First published: 13 June 2017

Collections: Wind Generation Systems including Energy Storage
Research Article
Open Access

oa

Influence of Critical Flow Rates on Characteristics of Enforced and Shear Flows in Circular Convergent-Divergent Channels
Leonid A. Savin, Alexey V. Kornaev, Elena P. Kornaeva,

First published: 12 June 2017
Research Article
Open Access

oa

Fault Feature Extraction and Diagnosis of Gearbox Based on EEMD and Deep Briefs Network
Kai Chen, Xin-Cong Zhou, Jun-Qiang Fang, Peng-fei Zheng, Jun Wang,

First published: 11 June 2017

Collections: Multifault Detection, Diagnosis, and Prognosis for Rotating Machinery
Research Article
Open Access

oa

Transition Process from Diffuser Stall to Stage Stall in a Centrifugal Compressor with a Vaned Diffuser
Nobumichi Fujisawa, Yutaka Ohta,

First published: 31 May 2017

Collections: Compressor Rotating Stall, Surge, and Its Control
Research Article
Open Access

oa

Evaluation of Wind Energy Potential as a Power Generation Source in Chad
Djamal Hissein Didane, Nurhayati Rosly, Mohd Fadhli Zulkafli, Syariful Syafiq Shamsudin,

First published: 31 May 2017

Collections: Wind Generation Systems including Energy Storage
Research Article
Open Access

oa

Experimental and Numerical Investigations of Surge Extension on a Centrifugal Compressor with Vaned Diffuser Using Steam Injection
Chuang Gao, Weiguang Huang, Tianhua Zheng, Kang Yang, Haosen Yang, Yun Cao,

First published: 29 May 2017

Collections: Compressor Rotating Stall, Surge, and Its Control

Tools

Follow journal

International Journal of Rotating Machinery

Filters

All International Journal of Rotating Machinery Articles

oa

Aerodynamic Optimization Design of a Multistage Centrifugal Steam Turbine and Its Off-Design Performance Analysis

oa

Optimal Sizing for Wind/PV/Battery System Using Fuzzy c-Means Clustering with Self-Adapted Cluster Number

oa

Observations of the Growth and Decay of Stall Cells during Stall and Surge in an Axial Compressor

oa

Bubble Flow Analysis of High Speed Cylindrical Roller Bearing under Fluid-Solid Thermal Coupling

oa

Theoretical Model for the Performance of Liquid Ring Pump Based on the Actual Operating Cycle

oa

Variable Ratio Hydrostatic Transmission Simulator for Optimal Wind Power Drivetrains

oa

Observations on Rotating Instabilities and Spike Type Stall Inception in a High-Speed Multistage Compressor

oa

Numerical Investigation of Fluid Flow and Performance Prediction in a Fluid Coupling Using Large Eddy Simulation

oa

Study on Frequency Characteristics of Rotor Systems for Fault Detection Using Variational Mode Decomposition

oa

Investigation of Performance and Rotor Tip Flow Field in a Low Speed Research Compressor with Circumferential Groove Casing Treatment at Varying Tip Clearance

oa

Effects of Geometry Design Parameters on the Static Strength and Dynamics for Spiral Bevel Gear

oa

The Impact of Convective Fluid Inertia Forces on Operation of Tilting-Pad Journal Bearings

oa

A Comparison of Off-Grid-Pumped Hydro Storage and Grid-Tied Options for an IRSOFC-HAWT Power Generator

oa

Application of Artificial Neural Networks to Calculation of Oil Film Reaction Forces and Dynamics of Rotors on Journal Bearings

oa

Enhancing LVRT Capability of DFIG-Based Wind Turbine Systems with SMES Series in the Rotor Side

oa

Influence of Critical Flow Rates on Characteristics of Enforced and Shear Flows in Circular Convergent-Divergent Channels

oa

Fault Feature Extraction and Diagnosis of Gearbox Based on EEMD and Deep Briefs Network

oa

Transition Process from Diffuser Stall to Stage Stall in a Centrifugal Compressor with a Vaned Diffuser

oa

Evaluation of Wind Energy Potential as a Power Generation Source in Chad

oa

Experimental and Numerical Investigations of Surge Extension on a Centrifugal Compressor with Vaned Diffuser Using Steam Injection

About Wiley Online Library

Help & Support

Opportunities

Connect with Wiley

Tools

Follow journal

International Journal of Rotating Machinery

Filters

Filter by Keyword

Publication Date

ACCESS STATUS

Author

All International Journal of Rotating Machinery Articles

Download PDFs

oa Aerodynamic Optimization Design of a Multistage Centrifugal Steam Turbine and Its Off-Design Performance Analysis

oa Optimal Sizing for Wind/PV/Battery System Using Fuzzy c-Means Clustering with Self-Adapted Cluster Number

oa Observations of the Growth and Decay of Stall Cells during Stall and Surge in an Axial Compressor

oa Bubble Flow Analysis of High Speed Cylindrical Roller Bearing under Fluid-Solid Thermal Coupling

oa Theoretical Model for the Performance of Liquid Ring Pump Based on the Actual Operating Cycle

oa Variable Ratio Hydrostatic Transmission Simulator for Optimal Wind Power Drivetrains

oa Observations on Rotating Instabilities and Spike Type Stall Inception in a High-Speed Multistage Compressor

oa Numerical Investigation of Fluid Flow and Performance Prediction in a Fluid Coupling Using Large Eddy Simulation

oa Study on Frequency Characteristics of Rotor Systems for Fault Detection Using Variational Mode Decomposition

oa Investigation of Performance and Rotor Tip Flow Field in a Low Speed Research Compressor with Circumferential Groove Casing Treatment at Varying Tip Clearance

oa Effects of Geometry Design Parameters on the Static Strength and Dynamics for Spiral Bevel Gear

oa The Impact of Convective Fluid Inertia Forces on Operation of Tilting-Pad Journal Bearings

oa A Comparison of Off-Grid-Pumped Hydro Storage and Grid-Tied Options for an IRSOFC-HAWT Power Generator

oa Application of Artificial Neural Networks to Calculation of Oil Film Reaction Forces and Dynamics of Rotors on Journal Bearings

oa Enhancing LVRT Capability of DFIG-Based Wind Turbine Systems with SMES Series in the Rotor Side

oa Influence of Critical Flow Rates on Characteristics of Enforced and Shear Flows in Circular Convergent-Divergent Channels

oa Fault Feature Extraction and Diagnosis of Gearbox Based on EEMD and Deep Briefs Network

oa Transition Process from Diffuser Stall to Stage Stall in a Centrifugal Compressor with a Vaned Diffuser

oa Evaluation of Wind Energy Potential as a Power Generation Source in Chad

oa Experimental and Numerical Investigations of Surge Extension on a Centrifugal Compressor with Vaned Diffuser Using Steam Injection

oa

Aerodynamic Optimization Design of a Multistage Centrifugal Steam Turbine and Its Off-Design Performance Analysis

oa

Optimal Sizing for Wind/PV/Battery System Using Fuzzy c-Means Clustering with Self-Adapted Cluster Number

oa

Observations of the Growth and Decay of Stall Cells during Stall and Surge in an Axial Compressor

oa

Bubble Flow Analysis of High Speed Cylindrical Roller Bearing under Fluid-Solid Thermal Coupling

oa

Theoretical Model for the Performance of Liquid Ring Pump Based on the Actual Operating Cycle

oa

Variable Ratio Hydrostatic Transmission Simulator for Optimal Wind Power Drivetrains

oa

Observations on Rotating Instabilities and Spike Type Stall Inception in a High-Speed Multistage Compressor

oa

Numerical Investigation of Fluid Flow and Performance Prediction in a Fluid Coupling Using Large Eddy Simulation

oa

Study on Frequency Characteristics of Rotor Systems for Fault Detection Using Variational Mode Decomposition

oa

Investigation of Performance and Rotor Tip Flow Field in a Low Speed Research Compressor with Circumferential Groove Casing Treatment at Varying Tip Clearance

oa

Effects of Geometry Design Parameters on the Static Strength and Dynamics for Spiral Bevel Gear

oa

The Impact of Convective Fluid Inertia Forces on Operation of Tilting-Pad Journal Bearings

oa

A Comparison of Off-Grid-Pumped Hydro Storage and Grid-Tied Options for an IRSOFC-HAWT Power Generator

oa

Application of Artificial Neural Networks to Calculation of Oil Film Reaction Forces and Dynamics of Rotors on Journal Bearings

oa

Enhancing LVRT Capability of DFIG-Based Wind Turbine Systems with SMES Series in the Rotor Side

oa

Influence of Critical Flow Rates on Characteristics of Enforced and Shear Flows in Circular Convergent-Divergent Channels

oa

Fault Feature Extraction and Diagnosis of Gearbox Based on EEMD and Deep Briefs Network

oa

Transition Process from Diffuser Stall to Stage Stall in a Centrifugal Compressor with a Vaned Diffuser

oa

Evaluation of Wind Energy Potential as a Power Generation Source in Chad

oa

Experimental and Numerical Investigations of Surge Extension on a Centrifugal Compressor with Vaned Diffuser Using Steam Injection