Research on High Temperature Mechanical Properties of 50Cr5MoV ROLL STEEL

High temperature mechanical properties of 50Cr5MoV roll steel was investigated by Gleeble 1500 thermal simulator testing machine. The morphology, composition and microstructure of fracture surface were observed and analyzed by OM, SEM and EDS. The results are indicative of that, there are two brittle temperature zones of 50Cr5MoV roll steel at the temperature of 600°C∼950°C and 1300°C∼1450°C, respectively. The section shrinkage rate is less than 60%. The fracture mode changes from mixed ones dominated by intergranular to toughness transgranular one with the increase of temperature at the range of 650"°C ∼1300°C. The fracture is along the solid–liquid phase at the range of 1300 °C ∼melting point. It is crucial to formulate the 50Cr5MoV casting technology, to prevent the cracks and improve the quality of 50Cr5MoV roll steel.

References

D. T. Kang, G. B. Ye, Large Forgings Materials and Heat Treatment (Bei Jing, BJ: Long Men Publishing Company 1998), 454.
Google Scholar
Ohkomory Y, Kitagawa L, Shimozuka K, et al, “Study on Spalling of Hot Strip Mill Backup roll,” Journal of the Iron and Steel Institute of Japan, 73 (1987), 691-698.
Google Scholar
Ohkomori Y, Kitagawa L, Shimozuka K, et al, “Cause and Prevention of Spalling of Backup Rolls for Hot Strip Mill,” Transactions of the Iron and Steel Institute of Japan, 28 (1988), 68-74.
10.2355/isijinternational1966.28.68
Web of Science® Google Scholar
Kapadia B M, Marsden K W, “ Spalling Behavior of Back-up Roll Materials”,(Paper Presented at the 39^th Mechanical Working and Steel Processing Conference Proceedings, Indianapolis, IN, USA, Oct.19-22, 1997), 349-386.
Google Scholar
J. Wang, “ Optimization of Continuous Casting Process for Improving The Quality of Medium Thin Slab” (M.Sc. thesis, Northeastern University 2006)
Google Scholar
Y. Gan, Modern Continuous Casting Using Manual (Bei Jing, BJ: Metallurgical Industry Press 2010), 100-125.
Google Scholar
Y. K. Yang, T. L. Wu, X. M. Jiang, Metal High Temperature Strength and Test (Shang Hai, SH Shanghai Science Press 1984), 33-37.
Google Scholar
J. S. Cheng, J. Liu, “Behavior and Analysis of High Temperature Thermoplastic of HG70 steel,” Research on Iron&Steel, 38 (2010), 27-29.
Google Scholar
Y. H Pan, “ The Secondary Cooling Technology of Billet During High-efficiency Continuous Casting” (MSc. thesis, Chongqing University 2008), 15-20.
Google Scholar
Lankford W T, “Some Considerations of Strength and Ductility in the Continuous Casting Process,” Metallurgical Transactions, 3 (1982), 1331-1357.
10.1007/BF02643017
Web of Science® Google Scholar

7th International Symposium on High‐Temperature Metallurgical Processing