Volume 214, Issue 8 1600726
Original Paper

High-performance normally off AlGaN/GaN-on-Si HEMTs with partially recessed SiNx MIS structure

Myoung-Jin Kang

Myoung-Jin Kang

Department of Electrical and Computer Engineering, and Inter-University Semiconductor Research Center, Seoul National University, Seoul 151-744, Korea

Search for more papers by this author
Min-Seong Lee

Min-Seong Lee

Department of Electrical and Computer Engineering, and Inter-University Semiconductor Research Center, Seoul National University, Seoul 151-744, Korea

Search for more papers by this author
Gwang-Ho Choi

Gwang-Ho Choi

Department of Electrical and Computer Engineering, and Inter-University Semiconductor Research Center, Seoul National University, Seoul 151-744, Korea

Search for more papers by this author
Il-Hwan Hwang

Il-Hwan Hwang

Department of Electrical and Computer Engineering, and Inter-University Semiconductor Research Center, Seoul National University, Seoul 151-744, Korea

Search for more papers by this author
Ho-Young Cha

Ho-Young Cha

School of Electronic and Electrical Engineering, Hongik University, Seoul 121-791, Korea

Search for more papers by this author
Kwang-Seok Seo

Corresponding Author

Kwang-Seok Seo

Department of Electrical and Computer Engineering, and Inter-University Semiconductor Research Center, Seoul National University, Seoul 151-744, Korea

Corresponding author: e-mail [email protected], Phone: +82 2 880 7275, Fax: +82 2 873 9953

Search for more papers by this author
First published: 15 May 2017
Citations: 12

Abstract

Recessed MIS gate structures with SiNx gate dielectric layer were investigated for use in normally off AlGaN/GaN-on-Si high electron mobility transistors (HEMTs). The channel mobility and threshold voltage (Vth) instability were strongly affected by the recessed configuration. Employing a 30 nm SiNx gate dielectric layer composed of 6 nm PEALD and 24 nm ICP-CVD films on a 2 nm AlGaN recessed barrier layer resulted in excellent electrical and dynamic characteristics with reduced effective interface trap density. A maximum drain current density of 590 mA mm−1, an on-resistance of 0.75 mΩ · cm2, and a breakdown voltage of >1100 V were achieved for the gate-to-drain distance of 10 μm. Owing to the remaining AlGaN barrier layer under the recessed gate region of the partially recessed device, the interaction between MIS interface traps and channel electrons was suppressed effectively, resulting in improved channel mobility and Vth stability.

The full text of this article hosted at iucr.org is unavailable due to technical difficulties.