Volume 142, Issue 23 e56999
RESEARCH ARTICLE

Polyethylene/Hydrophobic Calcium Lignosulfonate Composite Film for Anti-Photooxidation of Fuji Apples

Song Zhang

Song Zhang

School of Materials Science and Engineering, Shanghai University, Shanghai, China

Contribution: Data curation (lead), Formal analysis (lead), ​Investigation (lead), Methodology (lead), Software (lead), Writing - original draft (lead), Writing - review & editing (equal)

Search for more papers by this author
Zhang Chen

Zhang Chen

School of Materials Science and Engineering, Shanghai University, Shanghai, China

Contribution: Conceptualization (equal), Funding acquisition (equal), ​Investigation (equal), Methodology (equal), Supervision (equal), Writing - review & editing (supporting)

Search for more papers by this author
Yanfeng Gao

Corresponding Author

Yanfeng Gao

School of Materials Science and Engineering, Shanghai University, Shanghai, China

Correspondence:

Yanfeng Gao ([email protected])

Contribution: Conceptualization (equal), Formal analysis (lead), Funding acquisition (lead), Methodology (equal), Project administration (lead), Supervision (equal), Validation (equal), Writing - review & editing (lead)

Search for more papers by this author
First published: 20 March 2025

Funding: This work was supported by National Natural Science Foundation of China (52372088).

ABSTRACT

Excessive ultraviolet (UV) radiation exposure induces photooxidative stress in plants, leading to severe cell damage. Current packaging films often rely on nonrenewable, petroleum-based UV absorbers, which may pose potential health risks. Calcium lignosulfonate, a natural byproduct derived from the pulp and paper industry, has attracted significant attention as a sustainable alternative to petroleum-based UV absorbers. In this study, calcium lignosulfonate was hydrophobically modified to enhance its compatibility with nonpolar low-density polyethylene (LDPE), and a UV-blocking composite film was subsequently fabricated. The hydrophobic modification significantly increased the water contact angle of calcium lignosulfonate from 5° to 101°. Incorporating the modified calcium lignosulfonate into LDPE improved both the melting point and crystallinity of the polymer. The resulting composite film demonstrated excellent UV-blocking performance, achieving a UV-A blocking rate of 95% and a UV-B blocking rate of 99%, and effectively mitigated photooxidative browning in “Fuji” apples. This film exhibits great potential for anti-photooxidation packaging applications while simultaneously reducing dependence on petroleum-based resources.

Conflicts of Interest

The authors declare no conflicts of interest.

Data Availability Statement

The data that support the findings of this study are available from the corresponding author upon reasonable request.

The full text of this article hosted at iucr.org is unavailable due to technical difficulties.