Volume 57, Issue 4 pp. 497-505

Osteoblast cell death on methacrylate polymers involves apoptosis

Julie E. Gough

Corresponding Author

Julie E. Gough

School of Biomedical Sciences, E Floor, University of Nottingham, Medical School, Queen's Medical Centre, Nottingham, NG7 2UH, United Kingdom

School of Biomedical Sciences, E Floor, University of Nottingham, Medical School, Queen's Medical Centre, Nottingham, NG7 2UH, United KingdomSearch for more papers by this author
Sandra Downes

Sandra Downes

Smith and Nephew Group Research Centre, York Science Park, Heslington, York, YO10 5DF, United Kingdom

Search for more papers by this author

Abstract

The success of an implant depends on the implant–tissue interface. There are many causes of implant failure, one of which is tissue necrosis. The aim of this in vitro study was to determine whether cell death of primary human osteoblasts (implant site specific cells) occurred by apoptosis (a form of programmed cell death) on two methacrylate polymers. Cells were cultured on poly(ethyl methacrylate)/tetrahydrofurfuryl methacrylate and poly(methyl methacrylate in the form of 13-mm discs, in conditioned medium containing leachable monomer and in the presence of various concentrations of monomer itself in the culture medium. It was found that monomer and leached monomer caused apoptosis of human osteoblast cells in this system. Tetrahydrofurfuryl methacrylate monomer was found to be more toxic than currently used monomer methylmethacrylate. Preincubation of polymers in serum containing medium was found to increase the biocompatibility of the polymers. High levels of apoptosis occurred on polymer used directly after polymerization. Apoptosis levels were decreased after polymer was incubated at 60°C overnight or for 3 days. Apoptosis therefore may occur in cells at the implant site in vivo. © 2001 John Wiley & Sons, Inc. J Biomed Mater Res 57: 497–505, 2001

The full text of this article hosted at iucr.org is unavailable due to technical difficulties.