Polyimide fibers prepared by a dry-spinning process: Enhanced mechanical properties of fibers containing biphenyl units
ABSTRACT
Polyimide (PI) fibers with enhanced mechanical properties and high thermal and dimensional stability were prepared via a two-step dry-spinning process through the introduction of 3,3′,4,4′-biphenyl tetracarboxylic dianhydride (BPDA) containing biphenyl units into rigid homopolyimide of pyromellitic dianhydride (PMDA) and 4,4′-oxydianiline. The attenuated total reflectance–Fourier transform infrared spectra results imply that the incorporated BPDA moieties accelerate the imidization process and increase the imidization degree (ID) of the precursor fibers; this was attributed to the increased molecular mobility of the polymer chains. Two-dimensional wide-angle X-ray diffraction spectra indicated that the prepared PI fibers possessed a well-defined crystal structure and polymer chains in the crystalline region were highly oriented along the fiber axis. The PI fiber, with the molar ratio of PMDA/BPDA being 7/3, showed optimum tensile strength and modulus values of 8.55 and 73.21 cN/dtex, respectively; these were attributed to the high IDs and molecular weights. Meanwhile, the PI fibers showed better dimensional stability than the commercial P84 fiber, and this is beneficial for its security applications. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016, 133, 43727.
