Superalloy 718 and Derivatives

Free Access

Front Matter (Pages: i-xi)

Introducing New Materials into Aero Engines-Risks and Rewards, A Users Perspective (Pages: 3-11)

Malcolm Thomas, Susan Murray, David Furrer,

Superalloys, the Most Successful Alloy System of Modern Times-Past, Present, and Future (Pages: 13-50)

Art Kracke,

An Overview of SMPC Research Programs to Improve Remelt Ingot Quality (Pages: 53-63)

Rodney L. Williamson,

Considering the Solidification Structure of VAR Ingots in the Numerical Simulation of the Cogging Process (Pages: 64-77)

Jan Terhaar, Jörg Poppenhäger, Dieter Bokelmann, Hendrik Schafstall, Kanchan Kelkar,

Solidification Front Tilt Angle Effect on Potential Nucleation Sites for Freckling in the Remelt of Ni-Base Superalloys (Pages: 78-94)

Jairo Valdes, Xingbo Liu, Paul King, Christopher Cowen, Paul Jablonski,

Assessment of Test Methods for Freckle Formation in Ni-base Superalloy Ingot (Pages: 95-106)

Koji Kajikawa, Masaru Tanaka, Shigeru Suzuki, Hitohisa Yamada,

Quantitative Characterization of Two-Stage Homogenization Treatment of Alloy 718 (Pages: 107-115)

Zhujun Miao, Aidang Shan, Wei Wang, Jun Lu, Wenliang Xu, Hongwei Song,

Casting Superalloys for Structural Applications (Pages: 116-130)

Göran Sjöberg,

Castability of 718Plus(®) Alloy for Structural Gas Turbine Engine Components (Pages: 131-146)

Benjamin Peterson, Venkatesh Krishnan, Dave Brayshaw, Randy Helmink, Scott Oppenheimer, Eric Ott, Ray Benn, Michael Uchic,

Selection of Heat Treatment Parameters for a Cast Allvac 718Plus(®) Alloy (Pages: 147-160)

Oscar Caballero, Kepa Celaya, Tomás Gomez-Acebo, Antonio Julio Lopez,

Primary Carbides in Alloy 718 (Pages: 161-167)

A. Mitchell,

Application of Confocal Scanning Laser Microscope in Studying Solidification Behavior of Alloy 718 (Pages: 168-180)

Hongwei Song, Zhujun Miao, Aidang Shan, Wenliang Xu, Jun Lu,

Effect of Process Modeling on Product Quality of Superalloy Forgings (Pages: 181-197)

Martin Stockinger, Martin Riedler, Daniel Huber,

Influence of Both γ′ Distribution and Grain Size on the Tensile Properties of UDIMET 720Li At Room Temperature (Pages: 198-213)

Jean-Roch Vaunois, Jonathan Cormier, Patrick Villechaise, Alexandre Devaux, Benjamin Flageolet,

Effect of Compound Jacketing Rolling on Microstructure and Mechanical Properties of Superalloy GH4720Li (Pages: 214-221)

Jinglong Qu, Minqing Wang, Jianxin Dong, Guilin Wu, Ji Zhang,

Properties of New C&W Superalloys for High Temperature Disk Applications (Pages: 222-235)

Alexandre Devaux, Eric Georges, Philippe Héritier,

Manufacture and Property Evaluation of Super Alloy 44Ni-14Cr-1.8Nb-1.7Ti-1.5Mo-0.3V-Fe (Modified 706)–an Experience (Pages: 236-242)

U V Gururaja, P Sarkar, M Narayana Rao,

Grain Boundary Engineering of Allvac 718Plus(^®) for Aerospace Engine Applications (Pages: 243-253)

Peter Lin, Virgil Provenzano, Gino Palumbo, Tim Gabb, Jack Telesman,

Grain Boundary Engineering the Mechanical Properties of Allvac 718Plus™ Superalloy (Pages: 254-269)

T. P. Gabb, J. Telesman, A. Garg, P. Lin, V. Provenzano, R. Heard, H. M. Miller,

An Advanced Cast/Wrought Technology for GH720Li Alloy Disk from Fine Grain Ingot (Pages: 270-280)

Yuxin Zhao, Shuhong Fu, Shaowei Zhang, Xin Tang, Na Liu, Guoqing Zhang,

Research on Inconel 718 Type Alloys with Improvement of Temperature Capability (Pages: 281-296)

Shuhong Fu, Jianxin Dong, Maicang Zhang, Ning Wang, Xishan Xie,

FE Simulation of Microstructure Evolution during Ring Rolling Process of INCONEL Alloy 783 (Pages: 297-305)

Jong-Taek Yeom, Eun-Jeoung Jung, Jeoung Han Kim, Jae-Keun Hong, Nho-Kwang Park, Kook-Joo Kim, Jin-Mo Lee, Seung-Sik Choi,

Effect of Temperature and Strain during Forging on Subsequent Delta Phase Precipitation during Solution Annealing in ATI 718Plus(^®) Alloy (Pages: 306-319)

Erin McDevitt,

Toughness as a Function of Thermo-Mechanical Processing and Heat Treatment in 718Plus(^®) Superalloy (Pages: 320-330)

Scott Oppenheimer, Erin McDevitt, Wei-Di Cao,

Modeling the Hot Forging of Nickel-Based Superalloys: IN718 and Alloy 718Plus(^®) (Pages: 331-342)

Esteban B. Marin, Douglas J. Bammann, Arthur Brown, Haitham El Kadiri, R. Daniel Costley, Paul T. Wang, Mark F. Horstemeyer,

The Microstructure and Mechanical Properties of Inconel 718 Fine Grain Ring Forging (Pages: 343-349)

Zixing Wang, Dianhua Zhou, Qun Deng, Guosheng Chen, Wei Xie,

Numerical Simulation of Hot Die Forging for IN 718 Disc (Pages: 350-361)

X.D. Lu, J.H. Du, Q. Deng, G.S. Chen, X.F. Liu,

The Effects of Process-Route Variations on the Tensile Properties of Closed-Die Waspaloy Forgings, via Statistical Modeling Techniques (Pages: 362-370)

A.O. Latinwo, B.P Wynne, W. M. Rainforth,

Microstructure and Properties of Fine Grain IN718 Alloy Bar Products Produced by Continuous Rolling (Pages: 971-981)

Guosheng Chen, Qingzeng Wang, Fengjun Liu, Zixing Wang, Jianxin Dong, Xishan Xie,

Effect of Thermomechanical Working on the Microstructure and Mechanical Properties of Hot Pressed Superalloy Inconel 718 (Pages: 382-396)

Andrzej Nowotnik, Jan Sieniawski,

An Overview of Ni Base Additive Fabrication Technologies for Aerospace Applications (Pages: 397-412)

Christopher L. English, Sudhir K. Tewari, David H. Abbott,

Linear Friction Welding of Allvac(^®) 718Plus(^®) Superalloy (Pages: 413-426)

K.R. Vishwakarma, O.A. Ojo, P. Wanjara, M.C. Chaturvedi,

Transient Liquid Phase Bonding of Newly Developed HAYNES 282 Superalloy (Pages: 427-438)

A. Ghoneim, O. A. Ojo,

Investigation of Homogenization and its Influence on the Repair Welding of Cast Allvac 718Plus(^®) (Pages: 439-454)

Joel Andersson, Göran Sjöberg, Josefin Larsson,

Additively Manufactured INCONEL(®) Alloy 718 (Pages: 455-469)

Raymond C. Benn, Randy P. Salva,

Simulations of Temperatures, Residual Stresses, and Porosity Measurements in Spray Formed Super Alloys Tubes (Pages: 470-485)

Reinhard Ristau, Andreas Becker, Volker Uhlenwinkel, Reinhold Kienzler,

Flowforming of a Nickel Based Superalloy (Pages: 486-498)

Shawn Rhodes, Juan Valencia, John Ryan, Steven Stawarz, Christopher Humiston,

Clad Stainless Steels and High-Ni-Alloys for Welded Tube Application (Pages: 499-508)

Wolfgang Bretz,

Improved Superalloy Grinding Performance with Novel CBN Crystals (Pages: 509-517)

Sridhar Kompella, Kai Zhang,

Additive Manufacturing for Superalloys–Producibility and Cost (Pages: 521-537)

James Moor, Andrew Debiccari, Benjamin Lagow, Sudhir Tewari, Mary Kinsella,

Hot Ductility Study of HAYNES(^®) 282(^®) Superalloy (Pages: 538-554)

Joel Andersson, Göran Sjöberg, Mahesh Chaturvedi,

The Creep and Fatigue Behavior of Haynes 282 at Elevated Temperatures (Pages: 555-557)

Sara C. Longanbach, Carl J. Boehlert,

Effect of Microstructure on the High Temperature Fatigue Properties of Two Ni-based Superalloys (Pages: 558-567)

G. Muralidharan, Rick Battiste, Edward A. Kenik, James Bentley, Bruce G. Bunting,

Numerical Simulation of the Simultaneous Precipitation of δ and γ′ Phases in the Ni-Base Superalloy ATI Allvac®718Plus^™ (Pages: 568-578)

Rene Radis, Gerald A. Zickler, Martin Stockinger, Christof Sommitsch, Ernst Kozeschnik,

Alloy 718 for Oilfield Applications (Pages: 579-593)

J.J. deBarbadillo, S.K. Mannan,

Characterization of Microstructures Containing Abnormal Grain Growth Zones in Alloy 718 (Pages: 594-606)

Benjamin Flageolet, O. Yousfi, Y. Dahan, P. Villechaise, J. Cormier,

A TEM Study of Creep Deformation Mechanisms in Allvac 718Plus (Pages: 607-615)

Raymond R. Unocic, Kinga A. Unocic, Robert W. Hayes, Glenn S. Daehn, Michael J. Mills,

Effects of Al and Ti on Haynes 282 with Fixed Gamma Prime Content (Pages: 616-628)

Paul D. Jablonski, Christopher J. Cowen, Jeffery A. Hawk,

Time-Temperature-Transformation Diagram of Alloy 945 (Pages: 629-643)

Sarwan Mannan,

Long Term Thermal Exposure of HAYNES 282 Alloy (Pages: 644-660)

L. M. Pike,

Modeling and Simulation of Alloy 718 Microstructure and Mechanical Properties (Pages: 661-677)

David Furrer, Robert Goetz, Gangshu Shen,

Aging Effects on the γ′ and γ″ Precipitates of Inconel 718 Superalloy (Pages: 678-688)

Hui-Yun Bor, Chao-Nan Wei, Huu Tri Nguyen, An-Chou Yeh, Chen-Ming Kuo,

Overview on 718Plus(®) Assessment within “VITAL” Project (Pages: 689-704)

Oscar Caballero Ruiz, Göran Sjöberg, Tomás Gómez-Acebo,

Hold-Time Fatigue Crack Growth of Allvac 718Plus (Pages: 705-717)

Magnus Hörnqvist, Leif Viskari, Krystyna Stiller, Göran Sjöberg,

Atomic-Level Characterization of Grain-Boundary Segregation and Elemental Site-Location in Ni-Base Superalloy by Aberration-Corrected Scanning Transmission Electron Microscopy (Pages: 718-723)

Masashi Watanabe,

Effect of Nickel Content on Delta Solvus Temperature and Mechanical Properties of Alloy 718 (Pages: 724-736)

Richard B. Frank, Christopher G. Roberts, Jingxian Zhang,

Evolution of δ Phase Microstructure in Alloy 718 (Pages: 737-750)

Sundararaman Mahadevan, Sachin Nalawade, Jung Bahadur Singh, Amit Verma, Bhaskar Paul, Kishore Ramaswamy,

An Integrated Approach to Relate Hot Forging Process Controlled Microstructure of IN718 Aerospace Components to Fatigue Life (Pages: 751-765)

Michael Stoschka, Martin Riedler, Martin Stockinger, Hermann Maderbacher, Wilfried Eichlseder,

The Effect of Primary γ′ Distribution on Grain Growth Behavior of GH720Li Alloy (Pages: 766-779)

Maicang Zhang, Jianxin Dong, Zhongnan Bi, Qiuying Yu, Yuchun Zhang,

Systematic Evaluation of Microstructural Effects on the Mechanical Properties of ATI 718Plus(^®) Alloy (Pages: 780-797)

R.M. Kearsey, J. Tsang, P. Au, S. Oppenheimer, E. McDevitt,

Microstructural Evolution of ATI 718Plus Contoured Rings When Exposed to Heat Treatment Procedures (Pages: 798-807)

Octavio Covarrubias,

Serrated Yielding in Alloy 718 (Pages: 808-823)

Sachin Nalawade, Sundararaman Mahadevan, Jung Bahadur Singh, Kishore Ramaswamy, Amit Verma,

Effect of Serrated Grain Boundaries on the Creep Property of Inconel 718 Superalloy (Pages: 824-835)

An-Chou Yeh, Kang-Wei Lu, Chen-Ming Kuo, Hui-Yun Bor, Chao-Nan Wei,

Influence of B and Zr on Microstructure and Mechanical Properties of Alloy 718 (Pages: 836-846)

T. Fedorova, J. Rösler, B. Gehrmann, J. Klöwer,

Structure-Property Relationships in Waspaloy via Small Angle Scattering and Electrical Resistivity Measurements (Pages: 847-858)

Ricky L. Whelchel, Rosario A. Gerhardt, Ken Littrell,

Oxidation of Superalloys in Extreme Environments (Pages: 859-875)

B. A. Pint, S. Dryepondt, K. A. Unocic,

Microstructure Evolution in the Nickel Base Superalloy Allvac®718Plus^™ (Pages: 876-891)

K. Löhnert, F. Pyczak,

Effect of the LCF Loading Cycle Characteristics on the Fatigue Life of Inconel 718 at High Temperature (Pages: 892-905)

F. Taina, M. Pasqualon, V. Velay, D. Delagnes, P. Lours,

Machining Conditions Impact on the Fatigue Life of Waspaloy–Impact of Grain Size (Pages: 906-922)

Nihad Ben Salah, Serafettin Engin,

Oil-Grade Alloy 718 in Oil Field Drilling Applications (Pages: 923-932)

Jing Xu, Hendrik John, Gabriela Wiese, Xingbo Liu,

On the Influence of Temperature on Hydrogen Embritllement Susceptibility of Alloy 718 (Pages: 933-945)

Florian Galliano, Benoit Ter-Ovanessian, Eric Andrieu, Jean-Marc Cloué, Christine Baret-Blanc, Grégory Odemer,

Cast Alloys for Advanced Ultra Supercritical Steam Turbines (Pages: 946-960)

Gordon R. Holcomb, Paul D. Jablonski, Ping Wang,

Effect of Phosphorus on Microstructure and Mechanical Properties of IN718 Alloy after Hot Corrosion and Oxidation (Pages: 961-976)

Z. Q. Hu, X. M. Lou, W. R. Sun, L. X. Yu, S. L. Yang, W. H. Zhang,

Share