Machining Conditions Impact on the Fatigue Life of Waspaloy–Impact of Grain Size
Nihad Ben Salah,
Serafettin Engin,
Nihad Ben Salah
Materials engineering, Pratt & Whitney Canada; 1000 Marie Victorin 01HC4; Longueuil; QC; J4V 2K3, Canada
Search for more papers by this authorSerafettin Engin
Manufacturing Engineering, Pratt & Whitney Canada; 1000 Marie Victorin 01HC4; Longueuil; QC; J4V 2K3, Canada
Search for more papers by this authorNihad Ben Salah,
Serafettin Engin,
Nihad Ben Salah
Materials engineering, Pratt & Whitney Canada; 1000 Marie Victorin 01HC4; Longueuil; QC; J4V 2K3, Canada
Search for more papers by this authorSerafettin Engin
Manufacturing Engineering, Pratt & Whitney Canada; 1000 Marie Victorin 01HC4; Longueuil; QC; J4V 2K3, Canada
Search for more papers by this authorBook Editor(s):E.A. Ott, J.R. Groh, A. Banik, I. Dempster,
T.P. Gabb, R. Helmink,
X. Liu, A. Mitchell,
G.P. Sjöberg,
A. Wusatowska-Sarnek,
I. Dempster
Search for more papers by this authorR. Helmink
Search for more papers by this authorA. Mitchell
Search for more papers by this authorG.P. Sjöberg
Search for more papers by this authorA. Wusatowska-Sarnek
Search for more papers by this authorFirst published: 06 October 2010
Summary
This chapter contains sections titled:
-
Introduction
-
Experimental methods
-
Results
-
Discussion
-
Conclusions
-
Acknowledgments
References
- Choudhury, I.A., El-Baradie, M.A. “Machinability of nickel-based super alloys: a general review”, J. Mater. Process. Technol. 77 (1998) p. 278–284.
- Ezugwu, E.O., Wang, Z.M., Machado, A.R. “Machinability of nickel-based alloys: A review”, J. Mater. Process. Technol. 86 (1999) p. 1–16.
- Arunachalam, R., Mannan, M.A., “Machinability of nickel-based high temperature alloys” Machining Science and Technology, 4 (2000) p. 127–168.
- Pawade, R.S., Joshi, S.S., Brahmankar, P.K., Rahman, M., “An investigation of cutting forces and surface damage in high-speed turning of Inconel 718, J. Mater. Process. Technol. 192–193 (2007) p. 139–146.
- Österle, W., Li, P.X. “Mechanical and thermal responses of a nickel-base superalloy upon grinding with high removal rates”, Mater. Science and Engineering A 238 (1997) p. 357–366.
- Lee, S., Hwang, J., Shankar, M.R., Chandrasekar, S., Compton, W.D. “Large Strain Deformation Field in Machining”, Metall. Mater. Trans. A, 37A (2006) p. 1633–1643.
- Swaminathan, S., Shankar, M.R., Rao, B.C., Compton, W.D., Chandrasekar, S., King, A.H., Trumble, K.P., “Severe Plastic Deformation (SPD) and Nanostructured Materials by Machining”, J. Mater. Sci. 42 (2007) p. 1529–1541.
- Sharman, A.R.C., Hughes, J.I., Ridgway, K., “An analysis of the residual stresses generated in Inconel 718 when turning”, J. Mater. Process. Technol. 173 (2006) p. 359–367.
- Connolley, T., Starink, M.J., Reed, P.A.S., “Effect of broaching on high-temperature fatigue behaviour in notched specimens of Inconel 718, Metallurgical an Materials Transactions A, 35A (2004) p. 771–783.
- Qi, H., Jing, X.R., “Surface integrity and its effects on the fatigue life of the nickel-based superalloy GH33A”, Int. J. Fat., 13 (1991) p. 322–326.
- Metallic materials - instrumented indentation test for hardness and materials parameters–Part 1: Test method, International Standard ISO 14577-1 (2002).
- W. C. Oliver, and G.M. Pharr, “An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments,” J. Mater. Res., 7 (1992) p. 1564
- N. Ben Salah, “Effect of broaching parameters on microstructure and fatigue life of Waspaloy”, Pratt & Whitney Canada Analytical summary report, 2009
- Y. Xu, L. Fang, Q Cen, J. Zhu, “Nano structure and transformation mechanism of white layer for AISI 1045 steel during impact wear, Wear, 258 (2005) p. 537–544.
- Y.B. Guo, J. Sahni, “A comparative study of hard turned and cylindrically ground white layers”, International Journal of Machine tools & Manufacture, 44 (2004) p. 135–145.
- D.L. Davidson, R.G. Tryon. M. Oja, R. Matthews, K.S. Ravi Chandran, “Fatigue crack initiation in Waspaloy at 20°C”, Met. And Mat. Transactions A, 38A (2007) p. 2214–2225.
- S. Scheriau, R. Pippan, “Influence of grain size on orientation changes during plastic deformation”, Mat. Sc. and Eng. A, 493 (2008) p. 48–52.
- D. Greving, M. Gorelik, H. Kington “Manufacturing related residual stresses and turbine disk life prediction”, Review of quantitative Nondestructive evaluation, vol. 24, ed. By D.O. Thompson and D.E. Chimenti (AIP conference proceeding, 2005), p. 1339–1346
- N. Ben Salah, “CPW697 machining process impact on the fatigue life”, Pratt & Whitney Canada internal report, January 2007
- A. Javidi, U. Rieger, W. Eichlseder, “The ffect of machining on the surface integrity and fatigue life”, International Journal of fatigue, 30 (2008) p. 2050–2055.
- M.L. Brogdon “The effect of As-large-as (ALA) grains on the high-temperature fatigue life of Waspaloy” (Report AFRL-ML-WP-TM-2007–4050, AFRL Dayton, 2006)
- Sh. Mukhtarova, N. Dudova, V. Valitov, “Processing and mechanical properties of bulk nano-strcutured nickel-based alloys”, Materials Science and Engineering A, 503 (2009), p. 181–184.
