• Issue

    Journal of Applied Polymer Science: Volume 124, Issue 1

    1-877
    5 April 2012
Previous Issue|Next Issue
Export Citation(s)Download PDF(s)

Dielectric relaxation and Schottky conduction of IR laser irradiated Makrofol-DE polycarbonate

Taha A. Hanafy, 
  • Pages: 1-8
  • First Published: 19 August 2011

Structure−property relationships of halogen-free flame-retarded poly(butylene terephthalate) and glass fiber reinforced PBT

T. Köppl,  S. Brehme,  F. Wolff-Fabris,  V. Altstädt,  B. Schartel,  M. Döring, 
  • Pages: 9-18
  • First Published: 30 September 2011

Properties of styrene butadiene rubber (SBR)/recycled acrylonitrile butadiene rubber (NBRr) blends: The effects of carbon black/silica (CB/Sil) hybrid filler and silane coupling agent, Si69

Nik Z. Noriman,  Hanafi Ismail, 
  • Pages: 19-27
  • First Published: 30 September 2011

Preparation of polyester nanofibers and nanofiber yarns from polyester/cellulose acetate butyrate immiscible polymer blends

Mufang Li,  Ru Xiao,  Gang Sun, 
  • Pages: 28-36
  • First Published: 30 September 2011

Fire performance and post-fire mechanical properties of polymer composites coated with hybrid carbon nanofiber paper

Jinfeng Zhuge,  Jihua Gou,  Ruey-Hung Chen,  Aixi Zhou,  Ziqing Yu, 
  • Pages: 37-48
  • First Published: 30 September 2011

Physico-mechanical properties of natural rubber sheets coated by polyethyleneimine-functionalized poly(methyl methacrylate) nanoparticles

Sitthi Duangphet,  Somkieath Jenjob,  Panya Sunintaboon,  Nittaya Rattanasom,  Sombat Thanawan, 
  • Pages: 49-57
  • First Published: 30 September 2011

Synthesis, spectral, and thermal characterization of photoreactive epoxy resin containing cycloalkanone moiety in the main chain

R. Devi,  S. C. Murugavel, 
  • Pages: 58-66
  • First Published: 30 September 2011

Effect of thermal fatigue on the mechanical properties of epoxy matrix composites reinforced with olive pits powder

G. C. Papanicolaou,  A. F. Koutsomitopoulou,  A. Sfakianakis, 
  • Pages: 67-76
  • First Published: 03 October 2011

Annealing-induced high impact toughness of polypropylene/CaCO3 nanocomposites

Yong Lin,  Haibin Chen,  Chi-Ming Chan,  Jingshen Wu, 
  • Pages: 77-86
  • First Published: 03 October 2011

New multifunctional poly(lactide acid) composites: Mechanical, antibacterial, and degradation properties

E. Fortunati,  I. Armentano,  A. Iannoni,  M. Barbale,  S. Zaccheo,  M. Scavone,  L. Visai,  J. M. Kenny, 
  • Pages: 87-98
  • First Published: 03 October 2011

Hydrogel membranes based on gum tragacanth with tunable structure and properties. I. Preparation method using Taguchi experimental design

A. Kiani,  M. Shahbazi,  H. Asempour, 
  • Pages: 99-108
  • First Published: 03 October 2011

Oxidative chemical polymerization of 3, 4-ethylenedioxythiophene and its applications in antistatic coatings

Jikui Wang,  Guofeng Cai,  Xudong Zhu,  Xiaping Zhou, 
  • Pages: 109-115
  • First Published: 03 October 2011

Environmentally friendly flame-retardant materials produced by atmospheric pressure plasma modifications

Vladimir Totolin,  Majid Sarmadi,  Sorin O. Manolache,  Ferencz S. Denes, 
  • Pages: 116-122
  • First Published: 03 October 2011

Investigating the effect of PGA on physical and mechanical properties of electrospun PCL/PGA blend nanofibers

Rouhollah Mehdinavaz Aghdam,  Siamak Najarian,  Saeed Shakhesi,  Samaneh Khanlari,  Keyvan Shaabani,  Shahriar Sharifi, 
  • Pages: 123-131
  • First Published: 03 October 2011

Preparation and properties of polystyrene/SiCw/SiCp thermal conductivity composites

Junwei Gu,  Qiuyu Zhang,  Jing Dang,  Changjie Yin,  Shaojie Chen, 
  • Pages: 132-137
  • First Published: 03 October 2011

Crystallization behaviors and mechanical performance of polypropylene/tetrapod-shaped zinc oxide whisker composites

Wen Bianying,  Ji Binbin, 
  • Pages: 138-144
  • First Published: 03 October 2011

Supercritical fluid processing of Nafion® membranes: Methanol permeability and proton conductivity

Juan C. Pulido Ayazo,  David Suleiman, 
  • Pages: 145-154
  • First Published: 03 October 2011

Effect of adamantyl methacrylate on the thermal and mechanical properties of thermosensitive poly(N-isopropylacrylamide) hydrogels

Dongyu Zhu,  Mangeng Lu,  Jianwei Guo,  Liyan Liang,  Yanxun Lan, 
  • Pages: 155-163
  • First Published: 03 October 2011

Polylactic acid/ethylene glycol triblock copolymer as novel crosslinker for epoxidized natural rubber

T.-H. Nguyen,  P. Tangboriboonrat,  N. Rattanasom,  A. Petchsuk,  M. Opaprakasit,  C. Thammawong,  P. Opaprakasit, 
  • Pages: 164-174
  • First Published: 03 October 2011

A new tri-functional azetidine compound for self-curing aqueous-based PU system

Shih-Chieh Wang,  Po-Chen Chen,  Jing-Zhong Hwang,  Chi-Yuan Huang,  Jen-Taut Yeh,  Kan-Nan Chen, 
  • Pages: 175-181
  • First Published: 03 October 2011

Electrical conductivity modeling of carbon black/polycarbonate, carbon nanotube/polycarbonate, and exfoliated graphite nanoplatelet/polycarbonate composites

Michael D. Via,  Julia A. King,  Jason M. Keith,  Gregg R. Bogucki, 
  • Pages: 182-189
  • First Published: 03 October 2011

Preparation and characterization of poly(vinyl chloride)–continuous carbon fiber composites

Istvánné Ráthy,  Ákos Kuki,  Jenö Borda,  György Deák,  Miklós Zsuga,  Kálmán Marossy,  Sándor Kéki, 
  • Pages: 190-194
  • First Published: 04 October 2011

A new mechanism for the electrospinning of nanoyarns

Mohamed Basel Bazbouz,  George K. Stylios, 
  • Pages: 195-201
  • First Published: 04 October 2011

Effect of hydrophilic chain length on the aqueous solution behavior of block amphiphilic copolymers PMMA-b-PDMAEMA

Guilin Xiao,  Zhibiao Hu,  Guangpeng Zeng,  Yongqiang Wang,  Yaqun Huang,  Xinlin Hong,  Bilai Xia,  Gaoyong Zhang, 
  • Pages: 202-208
  • First Published: 04 October 2011

In vitro degradation and drug-release behavior of electrospun, fibrous webs of poly(lactic-co-glycolic acid)

Kyung Hwa Hong,  Seok Hoon Woo,  Tae Jin Kang, 
  • Pages: 209-214
  • First Published: 04 October 2011

Effect of particulate fillers on thermal expansions and other critical performances of polycarbonate-based compositions

Mousumi DeSarkar,  P. Senthilkumar,  Sushmita Franklin,  Gautam Chatterjee, 
  • Pages: 215-226
  • First Published: 04 October 2011

On the characterization and spinning of an organic-purified lignin toward the manufacture of low-cost carbon fiber

Darren A. Baker,  Nidia C. Gallego,  Frederick S. Baker, 
  • Pages: 227-234
  • First Published: 04 October 2011

Tribological behaviors of hybrid PTFE/nomex fabric/phenolic composite reinforced with multiwalled carbon nanotubes

Hui-Juan Zhang,  Zhao-Zhu Zhang,  Fang Guo, 
  • Pages: 235-241
  • First Published: 04 October 2011

Interfacial polymerization preparation of functional paper coated with polyamide film containing volatile essential oil

Hideaki Ichiura,  Masaru Takayama,  Noriyoshi Nishida,  Yoshito Otani, 
  • Pages: 242-247
  • First Published: 04 October 2011

Synthesis of enhanced urea–formaldehyde resin microcapsules doped with nanotitania

Xiao-Wei Niu,  Yue-Ming Sun,  Shou-Nian Ding,  Chao-Chao Chen,  Bo Song,  Hui-Bo Xu,  Zheng-Jian Qi,  Qi Qi, 
  • Pages: 248-256
  • First Published: 04 October 2011

Characterization of linear low-density polyethylene/poly(vinyl alcohol) blends and their biodegradability by Vibrio sp. isolated from marine benthic environment

Vidya Francis,  S. Raghul Subin,  Sarita G. Bhat,  Eby Thomas Thachil, 
  • Pages: 257-265
  • First Published: 04 October 2011

Effect of thermal treatment on structure and properties of polyester tire cords

J. P. Rath,  T. K. Chaki,  D. Khastgir, 
  • Pages: 266-274
  • First Published: 04 October 2011

Mechanical properties development of sodium alginate films with additives by UV-radiation processing

M. Z. I. Mollah,  Mubarak A. Khan, 
  • Pages: 275-281
  • First Published: 04 October 2011

Simulation of a flexible polymer tethered to a flat adsorbing surface

Hong Li,  Chang-Ji Qian,  Meng-Bo Luo, 
  • Pages: 282-287
  • First Published: 04 October 2011

Dramatic influence of curing temperature on micro–nano structure transform of HNBR filled with zinc dimethacrylate

Zheng Wei,  Yonglai Lu,  Shouke Yan,  Yang Meng,  Liqun Zhang, 
  • Pages: 288-295
  • First Published: 04 October 2011

Development and performance study of polypropylene/polyester bicomponent melt-blowns for filtration

Ya Liu,  Bowen Cheng,  Na Wang,  Weimin Kang,  Weili Zhang,  Keqi Xing,  Wenjuan Yang, 
  • Pages: 296-301
  • First Published: 04 October 2011

Use of polyester/glass-fiber residues as fillers for composites

L. V. Silva,  C. C. Angrizani,  J. R. Souza,  S. C. Amico,  J. T. N. Medeiros, 
  • Pages: 302-310
  • First Published: 04 October 2011

Simple kinetic numerical model based on rheometer data for ethylene–propylene–diene monomer accelerated sulfur crosslinking†

G. Milani,  F. Milani, 
  • Pages: 311-324
  • First Published: 04 October 2011

Compatibilization of ethylene/maleic anhydride/glycidyl methacrylate terpolymer for poly(phenylene sulfide)/poly(amide-66) blends

Bo Wu,  Xian Zheng,  Jinhua Leng,  Bin Yang,  Xian Chen,  Bobing He, 
  • Pages: 325-332
  • First Published: 04 October 2011

Miscibility of mixed stereoregular PMMA/PVCN monolayers at the air/water interface

Wen-Ping Hsu,  Ming-Shen Chiou,  Hsing-Ya Li, 
  • Pages: 333-341
  • First Published: 04 October 2011

Effect of laser CO2 irradiation on various properties of polyester fabric: Focus on dyeing

Majid Montazer,  Seid Javad Taheri,  Tina Harifi, 
  • Pages: 342-348
  • First Published: 04 October 2011

Influence of polymer microstructure on the performance of post-treated latex-based pressure sensitive adhesives

Lili Qie,  Marc A. Dubé, 
  • Pages: 349-364
  • First Published: 04 October 2011

Development of polyaniline-polydimethylsiloxane adduct nanoparticle dispersed butylated melamine formaldehyde cured soy alkyd

Sharif Ahmad,  Ufana Riaz,  Mohd Kashif,  Mohd Shoeb Khan, 
  • Pages: 365-372
  • First Published: 04 October 2011

Novel aromatic and aromatic–aliphatic poly(thiourea-amide)s for the extraction of toxic heavy metal ions

Ayesha Kausar,  Sonia Zulfiqar,  Zahoor Ahmad,  Muhammad Ishaq,  Muhammad Ilyas Sarwar, 
  • Pages: 373-385
  • First Published: 04 October 2011

Sorption studies of neutral red dye onto poly(acrylamide-co-maleic acid)-kaolinite/montmorillonite composites

H. M. Abdel-Aziz,  A. A. El-Zahhar,  T. Siyam, 
  • Pages: 386-396
  • First Published: 04 October 2011

In situ hybridization and characterization of fibrous hydroxyapatite/chitosan nanocomposite

C. Y. Zhang,  J. Chen,  Z. Zhuang,  T. Zhang,  X. P. Wang,  Q. F. Fang, 
  • Pages: 397-402
  • First Published: 04 October 2011

A comparative study on the properties of the different amino-functionalized multiwall carbon nanotubes reinforced epoxy resin composites

Qu Zehua,  Wang Guojian, 
  • Pages: 403-411
  • First Published: 04 October 2011

Effect of the molecular structure of polyurethane elastomers on the thermomechanical properties of PUE/PC blends

Juanjuan Tan,  Zhiyuan Jia,  Dekun Sheng,  Xiangdong Liu,  Yuming Yang, 
  • Pages: 412-420
  • First Published: 04 October 2011

Structure evolution of melt-spun poly(vinyl alcohol) fibers during hot-drawing

Qian Wu,  Ning Chen,  Li Li,  Qi Wang, 
  • Pages: 421-428
  • First Published: 04 October 2011

Effect of shear history on flow instability at capillary extrusion for long-chain branched polyethylene

Siriprumpoonthum Monchai,  Naoya Mieda,  Vu Anh Doan,  Shogo Nobukawa,  Masayuki Yamaguchi, 
  • Pages: 429-435
  • First Published: 04 October 2011

Polymerization shrinkage/stress and dentin bond strength of silorane and dimethacrylate-based dental composites

Yuncong Li,  Xiang Sun,  Jihua Chen,  Jie Xiong,  Xiaoyi Hu, 
  • Pages: 436-443
  • First Published: 04 October 2011

Preparation and evaluation of nano-epoxy composite resins containing electrospun glass nanofibers

Qi Chen,  Lifeng Zhang,  Myung-Keun Yoon,  Xiang-Fa Wu,  Ragib H. Arefin,  Hao Fong, 
  • Pages: 444-451
  • First Published: 04 October 2011

Failure mechanism of time-temperature superposition for poly(vinyl chloride)/dioctylphthalate (100/70) system

Jiajia Zou,  Feng You,  Lin Su,  Zhuo Yang,  Guangshun Chen,  Shaoyun Guo, 
  • Pages: 452-458
  • First Published: 04 October 2011

Effects of argon plasma treatment on surface characteristic of photopolymerization PEGDA–HEMA hydrogels

Guoxin Tan,  Rong Chen,  Chengyun Ning,  Lin Zhang,  Xiongjie Ruan,  Jingwen Liao, 
  • Pages: 459-465
  • First Published: 04 October 2011

Anomalous heat capacity of high-density polyethylene melts at high temperature

I. A. Hussein,  M. C. Williams, 
  • Pages: 466-469
  • First Published: 05 October 2011

Solid-state structural evolution of poly(ethylene terephthalate) during step uniaxial stretching from different initial morphologies: An in situ wide angle x-ray scattering study

Lyudmil V. Todorov,  Carla I. Martins,  Júlio C. Viana, 
  • Pages: 470-483
  • First Published: 05 October 2011

The role of synthetic and natural fillers on three-body abrasive wear behaviour of glass fabric–epoxy hybrid composites

N. Mohan,  S. Natarajan,  S. P. KumareshBabu, 
  • Pages: 484-494
  • First Published: 05 October 2011

Fabrication of honeycomb polyvinyl butyral film under humidity provided by super saturated salt solutions

Ruimin Zhang,  Jinwei Wang,  Minjia Wang,  Yedong He, 
  • Pages: 495-500
  • First Published: 05 October 2011

Polyethylene composite fibers. I. Composite fibers of high-density polyethylene

Waraporn Rattanawijan,  Taweechai Amornsakchai, 
  • Pages: 501-509
  • First Published: 05 October 2011

Application of cellulose sulfoacetate obtained from sugarcane bagasse as an additive in mortars

Bárbara Nascimento,  Guimes Rodrigues Filho,  Elaine Selaro Frigoni,  Heline Mendes Soares,  Carla da Silva Meireles,  Daniel Alves Cerqueira,  Artur José Monteiro Valente,  Rui de Albuquerque Carvalho,  Rosana Maria Nascimento de Assunção,  Leila Aparecida de Castro Motta, 
  • Pages: 510-517
  • First Published: 05 October 2011

Homogenization in supercritical carbon dioxide enhances the diffusion of vitamin E in ultrahigh-molecular-weight polyethylene

Ebru Oral,  Christine Godleski Beckos,  Orhun K. Muratoglu, 
  • Pages: 518-524
  • First Published: 05 October 2011

Reduction in percolation threshold of injection molded high-density polyethylene/exfoliated graphene nanoplatelets composites by solid state ball milling and solid state shear pulverization

Xian Jiang,  Lawrence T. Drzal, 
  • Pages: 525-535
  • First Published: 05 October 2011

Hyperbranched homo and thermoresponsive graft copolymers by using ATRP-macromonomer initiators

Sema Allı,  Abdulkadir Allı,  Baki Hazer, 
  • Pages: 536-548
  • First Published: 05 October 2011

Selective sorption of heavy metal on phosphorylated sago starch-extraction residue

Masato Igura,  Masanori Okazaki, 
  • Pages: 549-559
  • First Published: 05 October 2011

Transitions of morphological patterns of crystallizing polycarbonate in thin films

Yuesheng Ye,  Bohyun Kim,  Joonil Seog,  Kyu Yong Choi, 
  • Pages: 560-567
  • First Published: 05 October 2011

Characterization of macroporous 1-vinyl-2-pyrrolidone copolymers obtained by suspension polymerization

Małgorzata Maciejewska, 
  • Pages: 568-575
  • First Published: 05 October 2011

Adsorption of reactive yellow 145 onto chitosan coated magnetite nanoparticles

Nuzhet Ayca Kalkan,  Serpil Aksoy,  Eda Ayse Aksoy,  Nesrin Hasirci, 
  • Pages: 576-584
  • First Published: 05 October 2011

Porous poly(lactic acid) and PLA-nanocomposite structures

Xia Liao,  Arghavan V. Nawaby,  Hani E. Naguib, 
  • Pages: 585-594
  • First Published: 05 October 2011

Herschel-Bulkley rheological parameters of a novel environmentally friendly lightweight biopolymer drilling fluid from xanthan gum and starch

Munawar Khalil,  Badrul Mohamed Jan, 
  • Pages: 595-606
  • First Published: 05 October 2011

PTCR characteristics of poly(styrene-co-acrylonitrile) copolymer/stainless steel powder composites

Prativa Kar,  Nilesh K. Shrivastava,  Sumana Mallick,  B. B. Khatua, 
  • Pages: 607-615
  • First Published: 05 October 2011

Epoxy composites based on amino-silylated MMT: The role of interfaces and clay morphology

Filomena Piscitelli,  Anna Maria Scamardella,  Valentina Romeo,  Marino Lavorgna,  Giuseppina Barra,  Eugenio Amendola, 
  • Pages: 616-628
  • First Published: 05 October 2011

Compatibilization of polyetherimide/liquid crystalline polymer blend using modified multiwalled carbon nanotubes and polyphosphazene as compatibilizers

Ganesh C. Nayak,  Sumanta Sahoo,  Sukanta Das,  G. Karthikeyan,  Chapal K. Das,  A. K. Saxena,  A. Ranjan, 
  • Pages: 629-637
  • First Published: 05 October 2011

Application of tin(IV) porphyrin complexes as novel catalysts for the synthesis of new copolyurethanes with cyclopeptide moiety

Fatemeh Rafiemanzelat,  Elahe Abdollahi,  Majid Moghadam,  Valiollah Mirkhani,  Shahram Tangestaninejad,  Iraj Mohammadpoor-Baltork, 
  • Pages: 638-646
  • First Published: 05 October 2011

Comparative study on electrical properties of orientated carbon nanotubes/epoxy composites

Jianfeng Dai,  Junhong Wang,  Xiaowen Mu,  Xiaoting Chen, 
  • Pages: 647-653
  • First Published: 05 October 2011

Thermal, structural, and optical properties of γ-irradiated poly(vinyl alcohol)/poly(ethylene glycol) thin film

S. A. Nouh,  A. G. Nagla,  M. H. Othman,  S. A. Eman,  Z. I. Lotfi, 
  • Pages: 654-660
  • First Published: 05 October 2011

Prompt modification of styrene-butadiene rubber surface with trichloroisocyanuric acid by increasing chlorination temperature

Long Yin,  Hongbing Zhou,  Yiwu Quan,  Jianglin Fang,  Qingmin Chen, 
  • Pages: 661-668
  • First Published: 05 October 2011

Thermal and insulating properties of epoxy/aluminum nitride composites used for thermal interface material

Hui Yu,  Liangliang Li,  Teruo Kido,  Guannan Xi,  Guangchen Xu,  Fu Guo, 
  • Pages: 669-677
  • First Published: 05 October 2011

Dielectric relaxation behavior of conducting carbon black reinforced ethylene acrylic elastomer vulcanizates

B. P. Sahoo,  K. Naskar,  R. N. P. Choudhary,  S. Sabharwal,  D. K. Tripathy, 
  • Pages: 678-688
  • First Published: 05 October 2011

Synthesis and thermal properties of phase-change microcapsules incorporated with nano alumina particles in the shell

Ling Chen,  Li-Qun Zhang,  Rui-Fen Tang,  Yong-Lai Lu, 
  • Pages: 689-698
  • First Published: 10 October 2011

Spinning of poly(ethylene terephthalate) fibers incorporated with modified calcium silicate

Boonsri Kusuktham, 
  • Pages: 699-705
  • First Published: 10 October 2011

Synthesis and characterization of polyimide/hexagonal boron nitride composite

Canan Kizilkaya,  Yusuf Mülazim,  Memet Vezir Kahraman,  Nilhan Kayaman Apohan,  Atilla Güngör, 
  • Pages: 706-712
  • First Published: 10 October 2011

Preparation and properties of catalyzed polyimide/dicyanate semi-interpenetrating networks for polymer gas membrane with suppressed CO2-plasticization

E. M. Maya,  M. L. Sanchez,  A. Marcos,  J. G. de la Campa,  J. de Abajo, 
  • Pages: 713-722
  • First Published: 10 October 2011

Preparation and characterization of molecularly imprinted polymer of bovine serum albumin

Jing Zhang,  Jinqin Ma,  Xuanfeng Yue,  Xinli Bu,  Yanting Han, 
  • Pages: 723-728
  • First Published: 10 October 2011

Novel peroxide-vulcanized NBR-PAni.DBSA blends, part 2: Effects of conductive filler particles alignment

K. C. Yong, 
  • Pages: 729-739
  • First Published: 10 October 2011

Melt processing, mechanical, and fatigue crack propagation properties of reactively compatibilized blends of polyamide 6 and acrylonitrile–butadiene–styrene copolymer

Ulrich A. Handge,  Andrzej Galeski,  Sung Chul Kim,  Dirk J. Dijkstra,  Christian Götz,  Frank Fischer,  Goy Teck Lim,  Volker Altstädt,  Claus Gabriel,  Martin Weber,  Helmut Steininger, 
  • Pages: 740-754
  • First Published: 10 October 2011

Polyurethane foams with the contribution of products of hydroxyalkylation of N,N′-bis(2-hydroxyalkyl)oxamides with alkylene carbonates—obtaining and properties

Iwona Zarzyka,  Dotota Naróg,  Ryszard Stagraczyński, 
  • Pages: 755-764
  • First Published: 10 October 2011

Preparation and characterization of carbon nanofiber reinforced thermoplastic polyurethane nanocomposites

A. K. Barick,  D. K. Tripathy, 
  • Pages: 765-780
  • First Published: 10 October 2011

Study on surface modification and flame retardants properties of ammonium polyphosphate for polypropylene

Zhouqiao Lei,  Youming Cao,  Fei Xie,  Hui Ren, 
  • Pages: 781-788
  • First Published: 10 October 2011

Facile synthesis of high refractive index thiophene-containing polystyrenes

Young Chul An,  Gen-ichi Konishi, 
  • Pages: 789-795
  • First Published: 10 October 2011

Use of chitosan for removal of bisphenol a from aqueous solutions through quinone oxidation by polyphenol oxidase

Yuji Kimura,  Miwa Yamamoto,  Reiko Shimazaki,  Ayumi Kashiwada,  Kiyomi Matsuda,  Kazunori Yamada, 
  • Pages: 796-804
  • First Published: 10 October 2011

Effect of the incorporation of hydroxy-terminated liquid silicones on the cure characteristics, morphology, and release of a model protein from silicone elastomer-covered rods

Christopher McConville,  Gavin P. Andrews,  A. David Woolfson,  R. Karl Malcolm, 
  • Pages: 805-812
  • First Published: 10 October 2011

Thermally activated polymerization behavior of bisphenol-S/methylamine-based benzoxazine

Yanfang Liu,  Jian Zhang,  Zhao Liu,  Zhihong Li,  Zaiqin Yue, 
  • Pages: 813-822
  • First Published: 10 October 2011

Controlled mechanical and swelling properties of poly(vinyl alcohol)/sodium alginate blend hydrogels prepared by freeze–thaw followed by Ca2+ crosslinking

Liang Xie,  Man Jiang,  Xiaogang Dong,  Xia Bai,  Jin Tong,  Jiang Zhou, 
  • Pages: 823-831
  • First Published: 10 October 2011

Synthesis, characterization, and gamma radiation effects over well-defined poly(vinylsiloxanes) copolymers

A. J. Satti,  F. Nador,  C. Vitale,  G. Radivoy,  N. A. Andreucetti,  A. E. Ciolino,  E. M. Vallés, 
  • Pages: 832-839
  • First Published: 10 October 2011

Preparation and characterization of acrylonitrile-ethyl methacrylate copolymers and the effect of LiClO4 salt on electrical properties of copolymer films

Elif Vargün,  Mehmet Sankır,  Ali Usanmaz,  Yasin Kanbur,  Ufuk Abacı,  H. Yüksel Güney, 
  • Pages: 840-846
  • First Published: 10 October 2011

Synthesis and characterizations of poly(4-alkylthiazole vinylene)

Xia Guo,  Haijun Fan,  Maojie Zhang,  Yu Huang,  Songting Tan,  Yongfang Li, 
  • Pages: 847-854
  • First Published: 10 October 2011

Fabrication of poly(3,4-ethylenedioxythiophene)-polysaccharide composites

Renliang Lv,  Yinyi Sun,  Fengyuan Yu,  Hongbin Zhang, 
  • Pages: 855-863
  • First Published: 10 October 2011

The preparation of emulsion type sizing agent for carbon fiber and the properties of carbon fiber/vinyl ester resin composites

Jianye Liu,  Heyi Ge,  Juan Chen,  Dongzhi Wang,  Huashi Liu, 
  • Pages: 864-872
  • First Published: 10 October 2011

Optical property enhancement of dye-PDLC using active reflector structure

Jae Eun Jung,  Gae Hwang Lee,  Jae Eun Jang,  Kyu Young Hwang,  Farzana Ahmad,  Muhammad Jamil,  Lee Jin Woo,  Young Jae Jeon, 
  • Pages: 873-877
  • First Published: 11 October 2011