Article Index - Advances in Tribology

All Advances in Tribology Articles

Filters

21-40 of 166 results

Relevance

Export Citation(s)Download PDF(s)

Research Article
Open Access

oa

Effect of Load on the Tribological Properties of Eutectic Al-Si Reinforced n-Al₂O₃ under Dry Sliding Conditions
Pranav Dev Srivyas, M.S. Charoo,

First published: 07 February 2020
Research Article
Open Access

oa

The Performance of Squeeze Film between Parallel Triangular Plates with a Ferro-Fluid Couple Stress Lubricant
Akbar Toloian, Maghsood Daliri, Nader Javani,

First published: 30 January 2020
Research Article
Open Access

oa

Tribological Behaviour of Neem Oil with and without Graphene Nanoplatelets Using Four-Ball Tester
B. Suresha, G. Hemanth, Apurva Rakesh, K. M. Adarsh,

First published: 25 January 2020
Research Article
Open Access

oa

High Temperature Friction and Wear Performance of PVD Coatings under Press Hardening Contact Conditions
Sergej Mozgovoy, Jens Hardell, Braham Prakash,

First published: 17 April 2019
Research Article
Open Access

oa

Wear Resistance of (Diamond-Ni)-Ti6Al4V Gradient Materials Prepared by Combined Selective Laser Melting and Spark Plasma Sintering Techniques
Ramin Rahmani, Maksim Antonov, Lauri Kollo,

First published: 04 March 2019
Research Article
Open Access

oa

Comparative Experimental Study of Tribo-Mechanical Performance of Low-Temperature PVD Based TiN Coated PRCL Systems for Diesel Engine
Ghulam Moeen Uddin, Muhammad Sajid Kamran, Jawad Ahmad, Muhammad Ghufran, Muhammad Asim, Muhammad Qasim Zafar, Muhammad Irfan, Bilal Waseem, Awais Ahmad Khan, Muhammad Jawad, Ibrahim Zeid, Sagar Kamarthi,

First published: 12 December 2018
Research Article
Open Access

oa

Numerical Analysis of Elastic Contact between Coated Bodies
Sergiu Spinu,

First published: 01 November 2018
Research Article
Open Access

oa

Effect of Size of Multiwalled Carbon Nanotubes Dispersed in Gear Oils for Improvement of Tribological Properties
Kodanda Rama Rao Chebattina, V. Srinivas, N. Mohan Rao,

First published: 30 October 2018
Research Article
Open Access

oa

Partial Contact of a Rigid Multisinusoidal Wavy Surface with an Elastic Half-Plane
Ivan Y. Tsukanov,

First published: 18 October 2018
Research Article
Open Access

oa

The Contact Mechanics of Novikov’s Surface-Hardened Gearing during Running-in Process
Alexey Beskopylny, Nikolay Onishkov, Viktor Korotkin,

First published: 13 September 2018
Research Article
Open Access

oa

A Study of Hydromagnetic Longitudinal Rough Circular Step Bearing
Jatinkumar V. Adeshara, M. B. Prajapati, G. M. Deheri, R. M. Patel,

First published: 02 September 2018
Research Article
Open Access

oa

A Novel Analytical Method to Calculate Wheel-Rail Tangential Forces and Validation on a Scaled Roller-Rig
Nicola Bosso, Nicolò Zampieri,

First published: 09 August 2018
Research Article
Open Access

oa

Processing and Wear Behaviour of 3D Printed PLA Reinforced with Biogenic Carbon
Ertan G. Ertane, Annett Dorner-Reisel, Ozlem Baran, Thomas Welzel, Viola Matner, Stefan Svoboda,

First published: 01 August 2018
Research Article
Open Access

oa

Tribology and Mechanical Properties of Carbon Fabric/MWCNT/Epoxy Composites
B. Shivamurthy, Krishna Murthy, S. Anandhan,

First published: 05 July 2018
Research Article
Open Access

oa

Experimental and Theoretical Analysis of Zircaloy-4 and AISI 304 Stainless Steel Material Pair in Water Sliding Conditions
Neelima Khare, Praveen Kumar Limaye, Kulwant Singh, Dhananjay Tatyasaheb Jadhav, Arundhati Bute, Navnath Kalel,

First published: 02 July 2018
Research Article
Open Access

oa

Recirculation Flow and Pressure Distributions in a Rayleigh Step Bearing
Feng Shen, Cheng-Jin Yan, Jian-Feng Dai, Zhao-Miao Liu,

First published: 21 June 2018
Research Article
Open Access

oa

Theoretical Analysis of the Influence of Asperity’s Dimensions Affected by a Scale Factor on the Mixed Lubrication between Parallel Surfaces
F. Robbe-Valloire, R. Progri, T. Da Silva Botelho,

First published: 19 June 2018
Research Article
Open Access

oa

Effect of Tungsten Carbides on Abrasive Wear of Hardfacing Coatings
Philip Pichler, Martin Leitner, Florian Grün, Jürgen Haßler,

First published: 04 June 2018
Research Article
Open Access

oa

Viscoelastic Contact Simulation under Harmonic Cyclic Load
Sergiu Spinu,

First published: 20 May 2018
Research Article
Open Access

oa

Performance Evaluation of Jatropha and Pongamia Oil Based Environmentally Friendly Cutting Fluids for Turning AA 6061
T. P. Jeevan, S. R. Jayaram,

First published: 15 May 2018

Tools

Follow journal

Advances in Tribology

Filters

All Advances in Tribology Articles

oa

Effect of Load on the Tribological Properties of Eutectic Al-Si Reinforced n-Al₂O₃ under Dry Sliding Conditions

oa

The Performance of Squeeze Film between Parallel Triangular Plates with a Ferro-Fluid Couple Stress Lubricant

oa

Tribological Behaviour of Neem Oil with and without Graphene Nanoplatelets Using Four-Ball Tester

oa

High Temperature Friction and Wear Performance of PVD Coatings under Press Hardening Contact Conditions

oa

Wear Resistance of (Diamond-Ni)-Ti6Al4V Gradient Materials Prepared by Combined Selective Laser Melting and Spark Plasma Sintering Techniques

oa

Comparative Experimental Study of Tribo-Mechanical Performance of Low-Temperature PVD Based TiN Coated PRCL Systems for Diesel Engine

oa

Numerical Analysis of Elastic Contact between Coated Bodies

oa

Effect of Size of Multiwalled Carbon Nanotubes Dispersed in Gear Oils for Improvement of Tribological Properties

oa

Partial Contact of a Rigid Multisinusoidal Wavy Surface with an Elastic Half-Plane

oa

The Contact Mechanics of Novikov’s Surface-Hardened Gearing during Running-in Process

oa

A Study of Hydromagnetic Longitudinal Rough Circular Step Bearing

oa

A Novel Analytical Method to Calculate Wheel-Rail Tangential Forces and Validation on a Scaled Roller-Rig

oa

Processing and Wear Behaviour of 3D Printed PLA Reinforced with Biogenic Carbon

oa

Tribology and Mechanical Properties of Carbon Fabric/MWCNT/Epoxy Composites

oa

Experimental and Theoretical Analysis of Zircaloy-4 and AISI 304 Stainless Steel Material Pair in Water Sliding Conditions

oa

Recirculation Flow and Pressure Distributions in a Rayleigh Step Bearing

oa

Theoretical Analysis of the Influence of Asperity’s Dimensions Affected by a Scale Factor on the Mixed Lubrication between Parallel Surfaces

oa

Effect of Tungsten Carbides on Abrasive Wear of Hardfacing Coatings

oa

Viscoelastic Contact Simulation under Harmonic Cyclic Load

oa

Performance Evaluation of Jatropha and Pongamia Oil Based Environmentally Friendly Cutting Fluids for Turning AA 6061

About Wiley Online Library

Help & Support

Opportunities

Connect with Wiley

Tools

Follow journal

Advances in Tribology

Filters

Filter by Keyword

Publication Date

ACCESS STATUS

Author

All Advances in Tribology Articles

Download PDFs

oa Effect of Load on the Tribological Properties of Eutectic Al-Si Reinforced n-Al2O3 under Dry Sliding Conditions

oa The Performance of Squeeze Film between Parallel Triangular Plates with a Ferro-Fluid Couple Stress Lubricant

oa Tribological Behaviour of Neem Oil with and without Graphene Nanoplatelets Using Four-Ball Tester

oa High Temperature Friction and Wear Performance of PVD Coatings under Press Hardening Contact Conditions

oa Wear Resistance of (Diamond-Ni)-Ti6Al4V Gradient Materials Prepared by Combined Selective Laser Melting and Spark Plasma Sintering Techniques

oa Comparative Experimental Study of Tribo-Mechanical Performance of Low-Temperature PVD Based TiN Coated PRCL Systems for Diesel Engine

oa Numerical Analysis of Elastic Contact between Coated Bodies

oa Effect of Size of Multiwalled Carbon Nanotubes Dispersed in Gear Oils for Improvement of Tribological Properties

oa Partial Contact of a Rigid Multisinusoidal Wavy Surface with an Elastic Half-Plane

oa The Contact Mechanics of Novikov’s Surface-Hardened Gearing during Running-in Process

oa A Study of Hydromagnetic Longitudinal Rough Circular Step Bearing

oa A Novel Analytical Method to Calculate Wheel-Rail Tangential Forces and Validation on a Scaled Roller-Rig

oa Processing and Wear Behaviour of 3D Printed PLA Reinforced with Biogenic Carbon

oa Tribology and Mechanical Properties of Carbon Fabric/MWCNT/Epoxy Composites

oa Experimental and Theoretical Analysis of Zircaloy-4 and AISI 304 Stainless Steel Material Pair in Water Sliding Conditions

oa Recirculation Flow and Pressure Distributions in a Rayleigh Step Bearing

oa Theoretical Analysis of the Influence of Asperity’s Dimensions Affected by a Scale Factor on the Mixed Lubrication between Parallel Surfaces

oa Effect of Tungsten Carbides on Abrasive Wear of Hardfacing Coatings

oa Viscoelastic Contact Simulation under Harmonic Cyclic Load

oa Performance Evaluation of Jatropha and Pongamia Oil Based Environmentally Friendly Cutting Fluids for Turning AA 6061

oa

Effect of Load on the Tribological Properties of Eutectic Al-Si Reinforced n-Al₂O₃ under Dry Sliding Conditions

oa

The Performance of Squeeze Film between Parallel Triangular Plates with a Ferro-Fluid Couple Stress Lubricant

oa

Tribological Behaviour of Neem Oil with and without Graphene Nanoplatelets Using Four-Ball Tester

oa

High Temperature Friction and Wear Performance of PVD Coatings under Press Hardening Contact Conditions

oa

Wear Resistance of (Diamond-Ni)-Ti6Al4V Gradient Materials Prepared by Combined Selective Laser Melting and Spark Plasma Sintering Techniques

oa

Comparative Experimental Study of Tribo-Mechanical Performance of Low-Temperature PVD Based TiN Coated PRCL Systems for Diesel Engine

oa

Numerical Analysis of Elastic Contact between Coated Bodies

oa

Effect of Size of Multiwalled Carbon Nanotubes Dispersed in Gear Oils for Improvement of Tribological Properties

oa

Partial Contact of a Rigid Multisinusoidal Wavy Surface with an Elastic Half-Plane

oa

The Contact Mechanics of Novikov’s Surface-Hardened Gearing during Running-in Process

oa

A Study of Hydromagnetic Longitudinal Rough Circular Step Bearing

oa

A Novel Analytical Method to Calculate Wheel-Rail Tangential Forces and Validation on a Scaled Roller-Rig

oa

Processing and Wear Behaviour of 3D Printed PLA Reinforced with Biogenic Carbon

oa

Tribology and Mechanical Properties of Carbon Fabric/MWCNT/Epoxy Composites

oa

Experimental and Theoretical Analysis of Zircaloy-4 and AISI 304 Stainless Steel Material Pair in Water Sliding Conditions

oa

Recirculation Flow and Pressure Distributions in a Rayleigh Step Bearing

oa

Theoretical Analysis of the Influence of Asperity’s Dimensions Affected by a Scale Factor on the Mixed Lubrication between Parallel Surfaces

oa

Effect of Tungsten Carbides on Abrasive Wear of Hardfacing Coatings

oa

Viscoelastic Contact Simulation under Harmonic Cyclic Load

oa

Performance Evaluation of Jatropha and Pongamia Oil Based Environmentally Friendly Cutting Fluids for Turning AA 6061