Influence of the Lost Foam Casting Microstructure on Low Cycle Fatigue Damage of A319 Aluminum Alloy

Nora Dahdah,

Nora Dahdah

Laboratoire de Mécanique de Lille (LML), CNRS UMR 8107; Cité Scientifique; Villeneuve, d'Ascq, 59650, France

Search for more papers by this author

Nathalie Limodin,

Nathalie Limodin

Laboratoire de Mécanique de Lille (LML), CNRS UMR 8107; Cité Scientifique; Villeneuve, d'Ascq, 59650, France

Search for more papers by this author

Ahmed El Bartali,

Ahmed El Bartali

Laboratoire de Mécanique de Lille (LML), CNRS UMR 8107; Cité Scientifique; Villeneuve, d'Ascq, 59650, France

Search for more papers by this author

Jean-François Witz,

Jean-François Witz

Laboratoire de Mécanique de Lille (LML), CNRS UMR 8107; Cité Scientifique; Villeneuve, d'Ascq, 59650, France

Search for more papers by this author

Rian Seghir,

Rian Seghir

Laboratoire de Mécanique de Lille (LML), CNRS UMR 8107; Cité Scientifique; Villeneuve, d'Ascq, 59650, France

Search for more papers by this author

Long Wang,

Long Wang

Laboratoire de Mécanique de Lille (LML), CNRS UMR 8107; Cité Scientifique; Villeneuve, d'Ascq, 59650, France

Search for more papers by this author

Eric Charkaluk,

Eric Charkaluk

Laboratoire de Mécanique de Lille (LML), CNRS UMR 8107; Cité Scientifique; Villeneuve, d'Ascq, 59650, France

Search for more papers by this author

Jean-Yves Buffiere,

Jean-Yves Buffiere

Laboratoire Matériaux, Ingénierie et Sciences (MATEIS), INSA-Lyon, CNRS UMR 5510; 20; Villeurbanne, Rhône, 69621, France

Search for more papers by this author

Nora Dahdah,

Nora Dahdah

Laboratoire de Mécanique de Lille (LML), CNRS UMR 8107; Cité Scientifique; Villeneuve, d'Ascq, 59650, France

Search for more papers by this author

Nathalie Limodin,

Nathalie Limodin

Laboratoire de Mécanique de Lille (LML), CNRS UMR 8107; Cité Scientifique; Villeneuve, d'Ascq, 59650, France

Search for more papers by this author

Ahmed El Bartali,

Ahmed El Bartali

Laboratoire de Mécanique de Lille (LML), CNRS UMR 8107; Cité Scientifique; Villeneuve, d'Ascq, 59650, France

Search for more papers by this author

Jean-François Witz,

Jean-François Witz

Laboratoire de Mécanique de Lille (LML), CNRS UMR 8107; Cité Scientifique; Villeneuve, d'Ascq, 59650, France

Search for more papers by this author

Rian Seghir,

Rian Seghir

Laboratoire de Mécanique de Lille (LML), CNRS UMR 8107; Cité Scientifique; Villeneuve, d'Ascq, 59650, France

Search for more papers by this author

Long Wang,

Long Wang

Laboratoire de Mécanique de Lille (LML), CNRS UMR 8107; Cité Scientifique; Villeneuve, d'Ascq, 59650, France

Search for more papers by this author

Eric Charkaluk,

Eric Charkaluk

Laboratoire de Mécanique de Lille (LML), CNRS UMR 8107; Cité Scientifique; Villeneuve, d'Ascq, 59650, France

Search for more papers by this author

Jean-Yves Buffiere,

Jean-Yves Buffiere

Laboratoire Matériaux, Ingénierie et Sciences (MATEIS), INSA-Lyon, CNRS UMR 5510; 20; Villeurbanne, Rhône, 69621, France

Search for more papers by this author

Book Editor(s):Dominique Bernard,

Dominique Bernard

Search for more papers by this author

Jean-Yves Buffière,

Jean-Yves Buffière

Search for more papers by this author

Tresa Pollock,

Tresa Pollock

Search for more papers by this author

Henning Friis Poulsen,

Henning Friis Poulsen

Search for more papers by this author

Anthony Rollett,

Anthony Rollett

Search for more papers by this author

Michael Uchic,

Michael Uchic

Search for more papers by this author

First published: 14 July 2014

https://doi.org/10.1002/9781118990278.ch16

Summary

This chapter contains sections titled:

Introduction
Experimental Procedure
Results and Discussion
Conclusions
Acknowledgments

References

Q.G. Wang, D. Apelian, D.A. Lados, “Fatigue behavior of A356-T6 aluminum cast alloys. Part I. Effect of casting defects,” Journal of Light Metals, 1 (2001), 73–84.
10.1016/S1471-5317(00)00008-0
CAS Google Scholar
X. Cao and J. Campbell, “The Nucleation of Fe-Rich Phases on oxide films in Al-11.5Si-0.4Mg cast alloys,” Metallurgical and Materials Transactions A, 34 (7) (2003), 1409–1420.
10.1007/s11661-003-0253-3
Web of Science® Google Scholar
S. Tabibian, E. Charkaluk, A. Constantinescu, F. Szmytkaa, A. Oudin, “TMF-LCF life assessment of a Lost Foam A319 aluminum alloy,” International Journal of Fatigue, 53 (2013), 75–81.
10.1016/j.ijfatigue.2012.01.012
CAS Web of Science® Google Scholar
J-Y. Buffière, S. Savelli, P.H. Jouneau, E. Maire, R. Fougères, “Experimental study of porosity and its relation to fatigue mechanisms of model Al–Si7–Mg0.3 cast Al alloys,” Materials Science and Engineering A, 316 (2001), 115–126.
10.1016/S0921-5093(01)01225-4
Web of Science® Google Scholar
F. Marone, B. Münch, M. Stampanoni, “Fast reconstruction algorithm dealing with tomography artifacts,” Proceedings of SPIE-The International Society for Optical Engineering, 7804 (2010).
Google Scholar
J. Réthoré, N. Limodin, J-Y. Buffière, F. Hild, W. Ludwig, S. Roux, “Digital volume correlation analyses of synchrotron tomographic images,” Journal of Strain Analysis for Engineering Design, 46 (2011), 683–695.
10.1177/0309324711409999
Web of Science® Google Scholar
P. Cachier, E. Bardinet, D. Dormont, X. Pennec, N. Ayache. “Iconic feature based nonrigid registration: the PASHA algorithm.” Computer Vision and Image Understanding, 89(2003): 272–298, 2003. ISSN 1077–3142
10.1016/S1077-3142(03)00002-X
Web of Science® Google Scholar
N. Limodin, A. El Bartali, L. Wang, J. Lachambre, J-Y. Buffière, E. Charkaluk, “Application of X-ray microtomography to study the influence of the casting microstructure upon the tensile behaviour of an Al–Si alloy,” Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms, in press.
Google Scholar

2nd International Congress on 3D Materials Science