Investigation of Pre‐Existing Pores in Creep Loaded 9Cr Steel - 2nd International Congress on 3D Materials Science - Wiley Online Library

Investigation of Pre-Existing Pores in Creep Loaded 9Cr Steel

Surya Deo Yadav,

Surya Deo Yadav

Institute for Materials Science and Welding, Graz University of Technology, Kopernikusgasse, 24, A-8010 Graz, Austria

Search for more papers by this author

Joerdis Rosc,

Joerdis Rosc

Materials Center Leoben Forschung GmbH (MCL), Roseggerstraße 12, A-8700 Leoben, Austria

Search for more papers by this author

Bernhard Sartory,

Bernhard Sartory

Materials Center Leoben Forschung GmbH (MCL), Roseggerstraße 12, A-8700 Leoben, Austria

Search for more papers by this author

Roland Brunner,

Roland Brunner

Materials Center Leoben Forschung GmbH (MCL), Roseggerstraße 12, A-8700 Leoben, Austria

Search for more papers by this author

Bernhard Sonderegger,

Bernhard Sonderegger

Institute for Materials Science and Welding, Graz University of Technology, Kopernikusgasse, 24, A-8010 Graz, Austria

Centre for Materials Engineering, Department of Mechanical Engineering, University of Cape, Town, Cape Town, South Africa

Search for more papers by this author

Christof Sommitsch,

Christof Sommitsch

Institute for Materials Science and Welding, Graz University of Technology, Kopernikusgasse, 24, A-8010 Graz, Austria

Search for more papers by this author

Cecilia Poletti,

Cecilia Poletti

Institute for Materials Science and Welding, Graz University of Technology, Kopernikusgasse, 24, A-8010 Graz, Austria

Search for more papers by this author

Surya Deo Yadav,

Surya Deo Yadav

Institute for Materials Science and Welding, Graz University of Technology, Kopernikusgasse, 24, A-8010 Graz, Austria

Search for more papers by this author

Joerdis Rosc,

Joerdis Rosc

Materials Center Leoben Forschung GmbH (MCL), Roseggerstraße 12, A-8700 Leoben, Austria

Search for more papers by this author

Bernhard Sartory,

Bernhard Sartory

Materials Center Leoben Forschung GmbH (MCL), Roseggerstraße 12, A-8700 Leoben, Austria

Search for more papers by this author

Roland Brunner,

Roland Brunner

Materials Center Leoben Forschung GmbH (MCL), Roseggerstraße 12, A-8700 Leoben, Austria

Search for more papers by this author

Bernhard Sonderegger,

Bernhard Sonderegger

Institute for Materials Science and Welding, Graz University of Technology, Kopernikusgasse, 24, A-8010 Graz, Austria

Centre for Materials Engineering, Department of Mechanical Engineering, University of Cape, Town, Cape Town, South Africa

Search for more papers by this author

Christof Sommitsch,

Christof Sommitsch

Institute for Materials Science and Welding, Graz University of Technology, Kopernikusgasse, 24, A-8010 Graz, Austria

Search for more papers by this author

Cecilia Poletti,

Cecilia Poletti

Institute for Materials Science and Welding, Graz University of Technology, Kopernikusgasse, 24, A-8010 Graz, Austria

Search for more papers by this author

Book Editor(s):Dominique Bernard,

Dominique Bernard

Search for more papers by this author

Jean-Yves Buffière,

Jean-Yves Buffière

Search for more papers by this author

Tresa Pollock,

Tresa Pollock

Search for more papers by this author

Henning Friis Poulsen,

Henning Friis Poulsen

Search for more papers by this author

Anthony Rollett,

Anthony Rollett

Search for more papers by this author

Michael Uchic,

Michael Uchic

Search for more papers by this author

First published: 14 July 2014

https://doi.org/10.1002/9781118990278.ch14

Citations: 3

Summary

This chapter contains sections titled:

Introduction
Experiments and Methodology
Growth Modelling of Cavities
Results and Discussion
Summary and Conclusions
Acknowledgement

References

C. G. Panait, W. Bendick, A. Fuchsmann, A. F. Gourgues-Lorenzon and J. Besson, “Study of the microstructure of the Grade 91 steel after more than 100000 h of creep exposure at 600 °C,” Int. J. of Press. Vessel. and Pip., 87 (2010), 326–335.
10.1016/j.ijpvp.2010.03.017
CAS Web of Science® Google Scholar
H. K. Danielsen and J. Hald “Behaviour of Z phase in 9-12%Cr steels,” Energy Mater., 1 (2006), 49–57.
10.1179/174892306X99732
CAS Google Scholar
H. T. Yao, F. Z. Xuan, Z. Wang and S. T. Tu, “A review of creep analysis and design under multi-axial stress states,” Nucl. Eng. and Des., 237 (2007), 1969–1986.
10.1016/j.nucengdes.2007.02.003
CAS Web of Science® Google Scholar
S. D. Yadav, B. Sonderegger, B. Sartory, C. Sommitsch and C. Poletti, “Characterization and quantification of cavities in 9Cr martensitic steel for power plants,” Mater. Sci. Technol., under review.
Google Scholar
M. E. Kassner and T. A. Hayes, “Creep cavitation in metals,” Int. J. of Plast., 19 (2003), 1715–1748.
10.1016/S0749-6419(02)00111-0
Web of Science® Google Scholar
http://imagej.nih.gov/ij/download.html.
Google Scholar
L. A. Feldkamp, L. C. Davis and J. W. Kress, “Practical cone-beam algorithm,” J. Opt. Soc. Am. A, 1 (6) (1984), 612–619.
10.1364/JOSAA.1.000612
Web of Science® Google Scholar
T. Buzug, Einführung in die Computertomographie, Springer-Verlag Berlin Heidelberg 2004.
10.1007/978-3-642-18593-9
Google Scholar
E. E. Underwood, Quantitative Stereology, Addison Wesley Series In Metallurgy And Materials, (1970).
Google Scholar
B. Sonderegger and E. Kozeschnik, “Particle strengthening in fcc crystals with prolate and oblate precipitates,” Scripta Mater., 66 (2012), 52–55.
10.1016/j.scriptamat.2011.10.003
CAS Web of Science® Google Scholar
S. Chandrasekhar, “Stochastic problems in physics and chemistry,” Rev. Mod. Phys., 15 (1943), 1–89.
10.1103/RevModPhys.15.1
Google Scholar
W. Beere and M. V. Speight, “Creep cavitation by vacancy diffusion in plastically deforming solid,” Metal Science, April (1978), 172–176.
Google Scholar
D. Hull and D. E. Rimmer, “The growth of grain-boundary voids under stress,” Philos. Mag., 4 (1959), 673–687.
10.1080/14786435908243264
CAS Web of Science® Google Scholar
H. Magnusson and R. Sandström, “Creep strain modeling of 9 to 12 Pct Cr steels based on microstructure evolution,” Metall. Mater. Trans. A, 38A (2007), 2033–2039.
10.1007/s11661-007-9256-9
CAS Web of Science® Google Scholar
P. Shewmon and P. Anderson, “Void nucleation and cracking at grain boundaries,” Acta Mater., 46 (1998), 4861–4872.
10.1016/S1359-6454(98)00194-3
CAS Web of Science® Google Scholar

Citing Literature

2nd International Congress on 3D Materials Science