Solidification of EAF Stainless Steel Dust
Bing. Peng
School of Metallurgical Science and Engineering, Central South University, Changsha 410083, China
Search for more papers by this authorJi Peng
School of Metallurgical Science and Engineering, Central South University, Changsha 410083, China
Search for more papers by this authorLiyuan Chai
School of Metallurgical Science and Engineering, Central South University, Changsha 410083, China
Search for more papers by this authorDi Yu
School of Information Science and Engineering, Central South University, Changsha 410083, China
Search for more papers by this authorBing. Peng
School of Metallurgical Science and Engineering, Central South University, Changsha 410083, China
Search for more papers by this authorJi Peng
School of Metallurgical Science and Engineering, Central South University, Changsha 410083, China
Search for more papers by this authorLiyuan Chai
School of Metallurgical Science and Engineering, Central South University, Changsha 410083, China
Search for more papers by this authorDi Yu
School of Information Science and Engineering, Central South University, Changsha 410083, China
Search for more papers by this authorJiann-Yang Hwang
Search for more papers by this authorPatrick Masset
Search for more papers by this authorOnuralp Yucel
Search for more papers by this authorRafael Padilla
Search for more papers by this authorGuifeng Zhou
Search for more papers by this authorSummary
This chapter contains sections titled:
-
Introduction
-
Experimental
-
Results and Discussion
-
Conclusions
-
Acknowledgments
References
- M. Pelino et al. “Vitrification of electric arc furnace dusts”, Waste Manage, 22 (2002), 945–94
- M. A. Garcia et al. “Low-grade MgO used to stabilize heavy metals in highly contaminated soils”,. Chemosphere, 56 (2004), 481–491
- J. Lobel et al. “Pilot-scale direct recycling of flue dust generated in electric stainless steelmaking”, Iron & Steelmaker, 27 (2000), 41–45
- K. W. Grieshaber, C. T. Philipp, and G. F. Bennett. “Process for recycling spent potliner and electric arc furnace dust into commercial products using oxygen enrichment”, Waste Manage, 14 (1994), 267–276
- P. Pisciella et al. “Chemical durability of glasses obtained by virtification of industrial wastes”, Waste Manage, 21 (2001), 1–9
- A. I. Fernandez et al. “Stabilization of electrical arc furnace dust with low-grade MgO prior to landfill”, Jenviron Eng-ASCE, 129 (2003), 275–279
- B. Peng et al. “Non-isothermal reduction kinetics of EAF dust-based pellets”, CIM BULL, 94 (2001), 64–70
- J. R. Conner and S. L. Hoeffner. “Critical review of stabilization/solidification technology”, CRIT REV ENV SCI TEC, 28 (1998), 397–462
- M. Rodriguez-Piñero et al. “Stabilization of a chromium- containing solid waste: immobilization of hexavalent chromium”, Waste Manage, 48 (1998), 1093–1099
- D. J. Assett and D. F. Pflughoeft-Hassett, “Use of coal combustion by-products for solidification/stabilization of hazardous wastes”, (Paper presented at The Annual meeting of the North Dakota Academy of Science, Washington, DC, 1997), 24–25
- K. Pillary, H. Von Blottnitz, and J. Petersen, “Ageing of chromium(III)-bearing slag and its relation to the atmospheric oxidation of solid chromium(III)-oxide in the presence of calcium oxide”, Chemosphere, 52 (2003), 1771–1779
- S. A. Mikhail, A. M. Turcotte, and J. Aota. “Thermoanalytical study of EAF dust and its vitrification product”,. Thermochim ACTA, 287 (1996), 71–79
- E. H. Kim, J. K. Cho, and S. Yim. “Digested sewage sludge solidification by converter slag for landfill cover”, Chemosphere, 59 (2005), 387–395
- I. Tadashi. “Vitrification of fly ash by swirling-flow furnace”, Waste Manage, 16 (1996), 453–460
- A. Siegmann, M. Narkis, and N. Rosenzweig. “Softening temperature of glassy polymers as affected by residual stresses”, Polym ENG SCI, 19 (1979), 223–225
- J. Peng et al. “Thermo-analytical study on stainless steelmaking dust”, J CENT SOUTH UNIV T, 10 (2003), 20–26
- B. Peng et al., “Study on the zinc reduction of stainless steelmaking dust”, (Paper presented at Sohn International Symposium, Iron and Steel and Recycling and Waste Treatment, Edited by F. Kongali and R.G. Reddy, TMS, 2006), . 497–505
