Improving Hot Workability of Ledeburitic Tool Steels
M. Fazarinc
Faculty of Natural Science and Engineering, University of Ljubljana, Askerceva cesta 12, 1000 Ljubljana, Slovenia
Search for more papers by this authorG. Kugler
Faculty of Natural Science and Engineering, University of Ljubljana, Askerceva cesta 12, 1000 Ljubljana, Slovenia
Search for more papers by this authorI. Perus
Faculty of Natural Science and Engineering, University of Ljubljana, Askerceva cesta 12, 1000 Ljubljana, Slovenia
Search for more papers by this authorM. Tercelj
Faculty of Natural Science and Engineering, University of Ljubljana, Askerceva cesta 12, 1000 Ljubljana, Slovenia
Search for more papers by this authorM. Fazarinc
Faculty of Natural Science and Engineering, University of Ljubljana, Askerceva cesta 12, 1000 Ljubljana, Slovenia
Search for more papers by this authorG. Kugler
Faculty of Natural Science and Engineering, University of Ljubljana, Askerceva cesta 12, 1000 Ljubljana, Slovenia
Search for more papers by this authorI. Perus
Faculty of Natural Science and Engineering, University of Ljubljana, Askerceva cesta 12, 1000 Ljubljana, Slovenia
Search for more papers by this authorM. Tercelj
Faculty of Natural Science and Engineering, University of Ljubljana, Askerceva cesta 12, 1000 Ljubljana, Slovenia
Search for more papers by this authorJiann-Yang Hwang
Search for more papers by this authorPatrick Masset
Search for more papers by this authorOnuralp Yucel
Search for more papers by this authorRafael Padilla
Search for more papers by this authorGuifeng Zhou
Search for more papers by this authorSummary
This chapter contains sections titled:
-
Introduction
-
Applied Materials and Experiments
-
Results
-
Conclusions
References
- T. Večko Pirtovšek, G. Kugler, M. Godec, M. Terčelj. “Microstructural characterization during the hot deformation of 1.17C-11.3Cr-1.48V-2.24W-1.35Mo ledeburitic tool steel”, Materials Characterization, 62/2 (2011), 189–197.
- H. J. McQueen and C. A. C. Imbert, Influence of carbides on the hot working of steel. Deformation, Processing and Properties of Structural Materials, ed. E.M. Tallef, C. K. Syn, and D. R. Lesuer, (The Minerals, Metals & Materials Society, 2000), 79–92.
- J. Liu, H. Chang, R. Wu, T. Y. Hsu, X. Ruan. “Investigation on hot deformation behaviour of AISI T1 high-speed steel”, Materials Characterization 45 (2000), 175–186.
- C. A. C. Imbert, H. J. McQueen. Hot ductility of tool steels, Canadian Metallurgical Quarterly 40 (2001) 235–244.
- M. R. Ghomashchi, C. M. Sellars. “Microstructural Changes in As-cast M2 Grade High Speed Steel during Hot Forging”, Metallurgical Transactions A, 24A (1993), 2171–2180.
- C. Rodenburg, M. Kryzanowski, J. H. Beynon, W. M. Rainforth. “Hot workability of spray-formed AISI M3:2 high speed steel”, Materials Science and Engineering A, 386 (2004), 420–427.
- H. Brandis, E. Haberling, H. H. Weigard, Metallurgical Aspects of Carbides in High Speed steels, Processing and Properties of High Speed Tool Steels, ed. M.G.H. Wells and L.W. Lherbier, (TMS_AIME, 1980), 1–18.
- Dennis W. Hetzner, William Van Geertruyden. “Crystallography and metallography of carbides in high alloy steels”, Materials Characterization, 59 (2008), 825–841.
-
D. Peidao,
S. Gongqi, and
Z. Shouze.
“A Scanning Electron Microscopy Study of Carbides in High-Speed steels”,
Materials Characterization,
29
(1992),
15–24.
10.1016/1044-5803(92)90091-U Google Scholar
- H. F. Fischmeister, R. Riedl, and S. Karagöz. “Solidification of High-Speed Tool Steels”, Metallurgical Transactions A, 20A (1989), 2133–2148.
- M. Boccalini, H. Goldenstein. “Solidification of high speed steels”, International Materials Review, 46/2 (2001) 92–115.
- Luan Y, Song N, Bai Y, Kang X, Li D. “Effect of solidification rate on the morphology and distribution of eutectic carbides in centrifugal casting high-speed steel rolls”, Journal of Materials Processing Technology 210 (2010), 536–541.
- Peidao Ding, Gongqi Shi, Shouze Zhou. “As-Cast Carbides in High-Speed Steels”, Metallurgical Transactions A, 24A (1993), 1265–1272.
- Hongshuag Di, Xiaoming Zhang, Guodong Wang, Xianghua Liu. “Spheroidizing kinetics of eutectic carbide in the twin roll-casting of M2 high speed steel”, Journal of Materials Processing Technology, 166 (2005), 359–363.
