Optimization of Preparation for U3O8 by Calcination from Ammonium Divrante Using Response Surface Methodology
Bingguo Liu
Faculty of Materials and Metallurgical Engineering, Kunming University of Science and Technology, Kunming Yunnan, 650093, PR China
Key Laboratory of Unconventional Metallurgy, Ministry of Education, University of Science and Technology, Kunming Yunnan, 650093, PR China
Search for more papers by this authorJinhui Peng
Faculty of Materials and Metallurgical Engineering, Kunming University of Science and Technology, Kunming Yunnan, 650093, PR China
Key Laboratory of Unconventional Metallurgy, Ministry of Education, University of Science and Technology, Kunming Yunnan, 650093, PR China
Search for more papers by this authorDaifu Huang
No. 272 Nuclear industry Factory, China National Nuclear Corporation, Hengyang, 421002, PR, China
Search for more papers by this authorBingguo Liu
Faculty of Materials and Metallurgical Engineering, Kunming University of Science and Technology, Kunming Yunnan, 650093, PR China
Key Laboratory of Unconventional Metallurgy, Ministry of Education, University of Science and Technology, Kunming Yunnan, 650093, PR China
Search for more papers by this authorJinhui Peng
Faculty of Materials and Metallurgical Engineering, Kunming University of Science and Technology, Kunming Yunnan, 650093, PR China
Key Laboratory of Unconventional Metallurgy, Ministry of Education, University of Science and Technology, Kunming Yunnan, 650093, PR China
Search for more papers by this authorDaifu Huang
No. 272 Nuclear industry Factory, China National Nuclear Corporation, Hengyang, 421002, PR, China
Search for more papers by this authorJiann-Yang Hwang
Search for more papers by this authorJaroslaw Drelich
Search for more papers by this authorJerome Downey
Search for more papers by this authorMark Cooksey
Search for more papers by this authorSummary
This chapter contains sections titled:
-
Introduction
-
Experimental
-
Results and Discussion
-
Conclusions
-
Acknowledgements
References
- XU, Y. C., “Contested regimes,” Energy, 33 (2008), 1197–1205.
- Song, K. W., Kim, K. S. and Kang, K. W., “Grain size control of UO2 pellets by adding heat-treated U3O8 particles to UO2 powder,” J. Nucl. Mater., 317 (2003), 204–211.
- Öberg, T. G. and Deming, S. N., “Bacterial leaching of nickel laterites using chemolithotrophic microorganisms: Process optimisation using response surface methodology and central composite rotatable design,” Measurement and control. 98 (2009), 241–246.
- Shweta, S., Anushree, M. and Santosh, S., “Application of response surface methodology (RSM) for optimization of nutrient supplementation for Cr (VI) removal by Aspergillus lentulus AML05,” J. Hazard. Mater., 164 (2009), 1198–1204.
- Gratuito, M. K. B. et al., “Production of activated carbon from coconut shell: Optimization using response surface methodology,” Bioresour. Technol., 99 (2008), 4887–4895.
- Myers, R. H. and Montgomery, D. C., Response Surface Methodology John Wiley & Sons, Inc., USA, 2002.
- Chen, M. J., Chen, K. N. and Lin, C. W., “Optimization on response surface models for the optimal manufacturing conditions of dairy tofu,” J. Food Eng., 68 (2005), 471–480.
- Fu, J. F., Zhao, Y. Q. and Wu, Q. L., “Response surface optimization of phosphorus species adsorption onto powdered alum sludge,” J. Hazard. Mater., 144 (2007), 499–505.
- Kiran, B., Kaushik, A. and Kaushik, C. P., “Response surface methodological approach for optimizing removal of Cr(VI) from aqueous solution using immobilized cyanobacterium,” Chem. Eng. J. 126 (2007), 147–153.
- Mohana, S., et al., “Response surface methodology for optimization of medium for decolourization of textile dye direct Black 22 by a novel bacterial consortium,” Bioresour. Technol., 99 (2008), 562–569.
- HU Zheng-jie, “Defluorination problem with the converting process of ADU to UO2 powder,” Atomic Energy Science and Technology, 32 (1998), 352–357.
- Bezerra, M. A., et al., “Response surface methodology (RSM) as a tool for optimization in analytical chemistry,” Talanta, 76 (2008), 965–977.
- Rodriguze-Nogales, et al., “Experimental design and response surface modeling applied for the optimisation of pectin hydrolysis by enzymes from A. niger CECT 2088,” Food Chem., 2007, 101 (2007), 634–642.
- Tan, I. A. W., et al., “Optimization of preparation conditions for activated carbons from coconut husk using response surface methodology,” Chem. Eng. J., 137 (2008), 462–470.
- Ahn, J. H., et al., “Optimization of microencapsulation of seed oil by response surface methodology,” Food Chem., 107 (2008), 98–105.
- Korbahti, B. K. and Rauf, M. A., “Determination of optimum operating conditions of carmine decoloration by UV/H2O2 using response surface methodology,” J. Hazard. Mater., 161 (2009), 281–286.
- Raymond, et al., “Response surface methodology,” Tecimometrics, 312 (1989), 432–438.
