ORIGINAL ARTICLE
Integrating structural control, health monitoring, and energy harvesting for smart cities
Sajad Javadinasab Hormozabad,
Mariantonieta Gutierrez Soto,
Hojjat Adeli,
Sajad Javadinasab Hormozabad
Department of Civil Engineering, University of Kentucky, Lexington, Kentucky, USA
Search for more papers by this authorCorresponding Author
Mariantonieta Gutierrez Soto
Department of Civil Engineering, University of Kentucky, Lexington, Kentucky, USA
Correspondence
Mariantonieta Gutierrez Soto, Department of Civil Engineering, University of Kentucky, 161 Raymond Building, Lexington, KY 40506, USA.
Email: [email protected]
Search for more papers by this authorHojjat Adeli
Department of Civil, Environmental and Geodetic Engineering, The Ohio State University, Columbus, Ohio, USA
Search for more papers by this authorSajad Javadinasab Hormozabad,
Mariantonieta Gutierrez Soto,
Hojjat Adeli,
Sajad Javadinasab Hormozabad
Department of Civil Engineering, University of Kentucky, Lexington, Kentucky, USA
Search for more papers by this authorCorresponding Author
Mariantonieta Gutierrez Soto
Department of Civil Engineering, University of Kentucky, Lexington, Kentucky, USA
Correspondence
Mariantonieta Gutierrez Soto, Department of Civil Engineering, University of Kentucky, 161 Raymond Building, Lexington, KY 40506, USA.
Email: [email protected]
Search for more papers by this authorHojjat Adeli
Department of Civil, Environmental and Geodetic Engineering, The Ohio State University, Columbus, Ohio, USA
Search for more papers by this authorAbstract
Cities that are adopting innovative and technology-driven solutions to improve the city's efficiency are considered smart cities. With the increased attention on smart cities with self-driving vehicles, drones, and robots, designing smart infrastructure is only a natural extension. Smart infrastructures aim to self-diagnose, self-power, self-adapt, and self-heal during normal and extreme operating conditions. Structural vibration control (SVC) and structural health monitoring (SHM) technologies, in particular, are expected to play pivotal roles in the development of modern smart and resilient structures. SVC methodologies intend to provide supplemental damping and reduce the structural dynamic responses during normal and extreme events. SHM methodologies offer valuable information about the structure's condition that is useful for maintenance purposes and rapid damage detection in post-hazard events. The collapse of the 12-story Champlain Towers South, a beachfront condominium in the Miami suburb of Surfside, Florida, could have been known in advance with an embedded SHM technology. More recently, the integrated structural control and health monitoring (ISCHM) systems have shown promise in the development of smart cities of the future. The integrated architecture incorporates the control and health monitoring components as complementary technologies and simultaneously takes advantage of both technologies. This article provides a state-of-the-art review of ISCHM ideas and systems. It presents recent significant developments in structural control, SHM, and energy harvesting that are paving the way towards the advent of integrated ISCHM systems, including damage-tolerant control systems. This article also identifies future promising research areas for designing the next generation of autonomous ISCHM systems for smart cities.
CONFLICT OF INTEREST
The authors declare no potential conflict of interest.
Open Research
DATA AVAILABILITY STATEMENT
This is a review paper and no data was used in the paper.
REFERENCES
- Abdeljaber, O., Avci, O., Kiranyaz, M. S., Boashash, B., Sodano, H., & Inman, D. J. (2018). 1-D CNNs for structural damage detection: Verification on a structural health monitoring benchmark data. Neurocomputing, 275, 1308–1317.
- Amezquita-Sanchez, J. P., & Adeli, H. (2015). Feature extraction and classification techniques for health monitoring of structures. Scientia Iranica. Transaction A, Civil Engineering, 22(6), 1931.
- Amini, F., Aghajanian, S., & Moaveni, B. (2017). Decentralized control of uncertain structures using Luenberger observer. Structural Engineering International, 27(1), 127–133.
- Bagherieh, O., & Nagamune, R. (2015). Gain-scheduling control of a floating offshore wind turbine above rated wind speed. Control Theory and Technology, 13(2), 160–172.
10.1007/s11768-015-4152-0 Google Scholar
- Bang, S., Park, S., Kim, H., & Kim, H. (2019). Encoder–decoder network for pixel-level road crack detection in black-box images. Computer-Aided Civil and Infrastructure Engineering, 34(8), 713–727.
- Baraniuk, R. G. (2007). Compressive sensing. IEEE Signal Processing Magazine, 24(4), 118–121.
- Barzegar, V., Laflamme, S., Downey, A., Li, M., & Hu, C. (2020). Numerical evaluation of a novel passive variable friction damper for vibration mitigation. Engineering Structures, 220, 110920.
- Behnia, A., Chai, H. K., & Shiotani, T. (2014). Advanced structural health monitoring of concrete structures with the aid of acoustic emission. Construction and Building Materials, 65, 282–302.
- Bellamy, A., Boustani, J., Brehm, C., & Gutierrez Soto, M. (2019). Towards resilient adaptive origami-inspired diagrid building envelope. In Active and passive smart structures and integrated systems XIII (Vol. 10967, 1096713). International Society for Optics and Photonics.
10.1117/12.2514132 Google Scholar
- Brosilow, C., & Joseph, B. (2002). Techniques of model-based control. Prentice Hall Professional.
- Brownjohn, J. M. (2006). Structural health monitoring of civil infrastructure. Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering, 365(1851), 589–622.
- Bruneau, M., Barbato, M., Padgett, J. E., Zaghi, A. E., Mitrani-Reiser, J., & Li, Y. (2017). State of the art of multihazard design. Journal of Structural Engineering, 143(10), 03117002.
- Cahill, P., Hazra, B., Karoumi, R., Mathewson, A., & Pakrashi, V. (2018). Vibration energy harvesting based monitoring of an operational bridge undergoing forced vibration and train passage. Mechanical Systems and Signal Processing, 106, 265–283.
- Cao, L., Laflamme, S., Hong, J., & Dodson, J. (2018). Input space dependent controller for civil structures exposed to multi-hazard excitations. Engineering Structures, 166, 286–301.
- Carden, E. P., & Fanning, P. (2004). Vibration based condition monitoring: A review. Structural Health Monitoring, 3(4), 355–377.
- Casciati, F., Rodellar, J., & Yildirim, U. (2012). Active and semi-active control of structures–theory and applications: A review of recent advances. Journal of Intelligent Material Systems and Structures, 23(11), 1181–1195.
- Cha, Y. J., Choi, W., & Büyüköztürk, O. (2017). Deep learning-based crack damage detection using convolutional neural networks. Computer-Aided Civil and Infrastructure Engineering, 32(5), 361–378.
- Chang, P. C., Flatau, A., & Liu, S. C. (2003). Health monitoring of civil infrastructure. Structural Health Monitoring, 2(3), 257–267.
10.1177/1475921703036169 Google Scholar
- Chatti, N., Ould-Bouamama, B., Gehin, A. L., & Merzouki, R. (2014). Signed bond graph for multiple faults diagnosis. Engineering Applications of Artificial Intelligence, 36, 134–147.
- Chen, B., & Xu, Y. L. (2008). Integrated vibration control and health monitoring of building structures using semi-active friction dampers: Part II—Numerical investigation. Engineering Structures, 30(3), 573–587.
- Chen, B., Xu, Y. L., & Zhao, X. (2010). Integrated vibration control and health monitoring of building structures: A time-domain approach. Smart Structures and Systems, 6(7), 811–833.
- Cheraghi, A., & Zahrai, S. M. (2016). Innovative multi-level control with concentric pipes along brace to reduce seismic response of steel frames. Journal of Constructional Steel Research, 127, 120–135.
- Daum, W. (2013). Guidelines for structural health monitoring. In Handbook of technical diagnostics (pp. 539–541). Springer, Berlin, Heidelberg.
10.1007/978-3-642-25850-3_27 Google Scholar
- De Domenico, D., Ricciardi, G., & Takewaki, I. (2019). Design strategies of viscous dampers for seismic protection of building structures: A review. Soil Dynamics and Earthquake Engineering, 118, 144–165.
- Díaz-Vico, D., Prada, J., Omari, A., & Dorronsoro, J. R. (2020). Deep support vector neural networks. Integrated Computer-Aided Engineering, 27(4), 389–402.
- Djemal, F., Chaari, R., Gafsi, W., Chaari, F., & Haddar, M. (2019). Passive vibration suppression using ball impact damper absorber. Applied Acoustics, 147, 72–76.
- Dyke, S. J., Bernal, D., Beck, J., & Ventura, C. (2003). Experimental phase II of the structural health monitoring benchmark problem. Proceedings of the 16th ASCE engineering mechanics conference.
- El-Khoury, O., & Adeli, H. (2013). Recent advances on vibration control of structures under dynamic loading. Archives of Computational Methods in Engineering, 20(4), 353–360.
- Erturk, A., & Inman, D. J. (2011). Broadband piezoelectric power generation on high-energy orbits of the bistable Duffing oscillator with electromechanical coupling. Journal of Sound and Vibration, 330(10), 2339–2353.
- Fan, W., & Qiao, P. (2011). Vibration-based damage identification methods: A review and comparative study. Structural Health Monitoring, 10(1), 83–111.
- Farrar, C. R., & Worden, K. (2006). An introduction to structural health monitoring. Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences, 365(1851), 303–315.
- Gao, Y., & Mosalam, K. M. (2018). Deep transfer learning for image-based structural damage recognition. Computer-Aided Civil and Infrastructure Engineering, 33(9), 748–768.
- Gattulli, V., & Romeo, F. (2000). Integrated procedure for identification and control of MDOF structures. Journal of Engineering Mechanics, 126(7), 730–737.
- Ge, J., Lefevre, B., Roemer, M., & Martin, R. (2013). Integrated health monitoring and fault adaptive control for an unmanned hexrotor helicopter, SAE International Technical Paper, No. 2013-01-2331.
- Genari, H. F., Mechbal, N., Coffignal, G., & Nóbrega, E. G. (2017). A modal H∞-norm-based performance requirement for damage-tolerant active controller design. Journal of Sound and Vibration, 394, 15–30.
- Goorts, K., & Narasimhan, S. (2019). Adaptive model predictive control for deployable control systems with constraints. Journal of Structural Engineering, 145(10), 04019110.
- Goyal, D., & Pabla, B. S. (2016). The vibration monitoring methods and signal processing techniques for structural health monitoring: A review. Archives of Computational Methods in Engineering, 23(4), 585–594.
- Gulgec, N. S., Takáč, M., & Pakzad, S. N. (2020). Structural sensing with deep learning: Strain estimation from acceleration data for fatigue assessment. Computer-Aided Civil and Infrastructure Engineering, 35(12), 1349–1364.
- Gutierrez Soto, M., & Adeli, H. (2013). Tuned mass dampers. Archives of Computational Methods in Engineering, 20(4), 419–431.
- Gutierrez Soto, M., & Adeli, H. (2017a). Multi-agent replicator controller for sustainable vibration control of smart structures. Journal of Vibroengineering, 19, 4300–4322.
- Gutierrez Soto, M., & Adeli, H. (2017b). Recent advances in control algorithms for smart structures and machines. Expert Systems, 34(2), e12205.
- Gutierrez Soto, M., & Adeli, H. (2019). Semi-active vibration control of smart isolated highway bridge structures using replicator dynamics. Engineering Structures, 186, 536–552.
- Harne, R. L., & Wang, K. W. (2013). A review of the recent research on vibration energy harvesting via bistable systems. Smart Materials and Structures, 22(2), 023001.
- He, J., Xu, Y. L., Zhan, S., & Huang, Q. (2017). Structural control and health monitoring of building structures with unknown ground excitations: Experimental investigation. Journal of Sound and Vibration, 390, 23–38.
- Housner, G., Bergman, L. A., Caughey, T. K., Chassiakos, A. G., Claus, R. O., Masri, S. F., Skelton, R. E., Soong, T. T., Spencer, B. F., & Yao, J. T. (1997). Structural control: Past, present, and future. Journal of Engineering Mechanics, ASCE, 123(9), 897–971.
- Huang, C. S., Le, Q. T., Su, W. C., & Chen, C. H. (2020). Wavelet-based approach of time series model for modal identification of a bridge with incomplete input. Computer-Aided Civil and Infrastructure Engineering, 35(9), 947–964.
- Huang, Q., Xu, Y. L., Li, J. C., Su, Z. Q., & Liu, H. J. (2012). Structural damage detection of controlled building structures using frequency response functions. Journal of Sound and Vibration, 331(15), 3476–3492.
- Huang, Y., Beck, J. L., & Li, H. (2019). Multitask sparse Bayesian learning with applications in structural health monitoring. Computer-Aided Civil and Infrastructure Engineering, 34(9), 732–754.
- Huang, Y., Beck, J. L., Wu, S., & Li, H. (2014). Robust Bayesian compressive sensing for signals in structural health monitoring. Computer-Aided Civil and Infrastructure Engineering, 29(3), 160–179.
- Hung, S. L., Huang, C. S., Wen, C. M., & Hsu, Y. C. (2003). Nonparametric identification of a building structure from experimental data using wavelet neural network. Computer-Aided Civil and Infrastructure Engineering, 18(5), 356–368.
- Iyer, S. R., Sinha, S. K., & Schokker, A. J. (2005). Ultrasonic C-scan imaging of post-tensioned concrete bridge structures for detection of corrosion and voids. Computer-Aided Civil and Infrastructure Engineering, 20(2), 79–94.
- Javadinasab Hormozabad, S., & Gutierrez Soto, M. (2021). Load balancing and neural dynamic model to optimize replicator dynamics controllers for vibration reduction of highway bridge structures. Engineering Applications of Artificial Intelligence, 99, 104138.
- Joshi, A. (2018). Hardware-in-the-loop (HIL) implementation and validation of SAE level 2 automated vehicle with subsystem fault tolerant fallback performance for takeover scenarios. SAE International Journal of Connected and Automated Vehicles, 1(1), 13–32.
10.4271/12-01-01-0002 Google Scholar
- Kalapodis, N., Kampas, G., & Ktenidou, O. J. (2020). A review towards the design of extraterrestrial structures: From regolith to human outposts. Acta Astronautica, 175, 540–569.
- Karami, K., & Akbarabadi, S. (2016). Developing a smart structure using integrated subspace-based damage detection and semi-active control. Computer-Aided Civil and Infrastructure Engineering, 31(11), 887–903.
- Khaligh, A., Zeng, P., & Zheng, C. (2009). Kinetic energy harvesting using piezoelectric and electromagnetic technologies—State of the art. IEEE Transactions on Industrial Electronics, 57(3), 850–860.
- Khodabandehlou, H., Pekcan, G., Fadali, M. S., & Salem, M. M. (2018). Active neural predictive control of seismically isolated structures. Structural Control and Health Monitoring, 25(1), e2061.
- Kong, X., & Li, J. (2018). Vision-based fatigue crack detection of steel structures using video feature tracking. Computer-Aided Civil and Infrastructure Engineering, 33, 783–799. https://doi.org/10.1111/mice.12353
- Korkmaz, S. (2011). A review of active structural control: Challenges for engineering informatics. Computers & Structures, 89(23-24), 2113–2132.
- Kullaa, J. (2003). Damage detection of the Z24 bridge using control charts. Mechanical Systems and Signal Processing, 17(1), 163–170.
- Kwon, D. K., Hwang, J. S., & Kareem, A. (2020). Damping estimation using enhanced virtual dynamic shaker: A web-enabled framework. Computer-Aided Civil and Infrastructure Engineering, 35(8), 887–901.
- Lara-Benıteza, P., Carranza-Garcıa, M., Garcıa-Gutierreza, J., & Riquelme, J. C. (2020). Asynchronous dual-pipeline deep learning framework for online data stream classification. Integrated Computer-Aided Engineering, 27(2), 101–119.
- Lei, W., Li, C., & Chen, M. Z. (2018). Robust adaptive tracking control for quadrotors by combining PI and self-tuning regulator. IEEE Transactions on Control Systems Technology, 27(6), 2663–2671.
- Li, S., Zhao, X., & Zhou, G. (2019). Automatic pixel-level multiple damage detection of concrete structure using fully convolutional network. Computer-Aided Civil and Infrastructure Engineering, 34(7), 616–634.
- Liu, G., Zhou, W., & Geng, M. (2020). Automatic seizure detection based on S-transform and deep convolutional neural network. International Journal of Neural Systems, 30(4), 2050024.
- Liu, Y. F., Nie, X., Fan, J. S., & Liu, X. G. (2020). Image-based crack assessment of bridge piers using unmanned aerial vehicles and three-dimensional scene reconstruction. Computer-Aided Civil and Infrastructure Engineering, 35(5), 511–529.
- Liu, Y. J., Zeng, Q., Tong, S., Chen, C. P., & Liu, L. (2019). Adaptive neural network control for active suspension systems with time-varying vertical displacement and speed constraints. IEEE Transactions on Industrial Electronics, 66(12), 9458–9466.
- Lozano, A., Suárez, J. S., Soto-Sánchez, C., Garrigos, J., Martinez-Alvarez, J. J., Ferrandez, J. M., & Fernandez, E. (2020). Neurolight: A deep learning neural Interface for cortical visual prostheses. International Journal of Neural Systems, 30(9), 2050045.
- Lu, Z., Wang, Z., Masri, S. F., & Lu, X. (2018). Particle impact dampers: Past, present, and future. Structural Control and Health Monitoring, 25(1), e2058.
- Lu, Z., Wang, Z., Zhou, Y., & Lu, X. (2018). Nonlinear dissipative devices in structural vibration control: A review. Journal of Sound and Vibration, 423, 18–49.
- Matarazzo, T. J., & Pakzad, S. N. (2018). Scalable structural modal identification using dynamic sensor network data with STRIDEX. Computer-Aided Civil and Infrastructure Engineering, 33(1), 4–20.
- Mechbal, N., & Nóbrega, E. G. (2012). Damage tolerant active control: Concept and state of art. International Federation of Automatic Control (IFAC) Proceedings Volumes, 45(20), 63–71.
- Mechbal, N., & Nóbrega, E. G. (2015). Spatial H∞ approach to damage-tolerant active control. Structural Control and Health Monitoring, 22(9), 1148–1172.
- Meng, F., Mokrani, B., Alaluf, D., Yu, J., & Preumont, A. (2018). Damage detection in active suspension bridges: An experimental investigation. Sensors, 18(9), 3002.
- Micheli, L., Hong, J., Laflamme, S., & Alipour, A. (2020). Surrogate models for high performance control systems in wind-excited tall buildings. Applied Soft Computing, 90, 106133.
- Mufti, A. (2001). Guidelines for structural health monitoring, Design manual 2. Intelligent Sensing for Innovative Structures (ISIS), Canada, Winnipeg, Manitoba.
- Nayyeri, F., Hou, L., Zhou, J., & Guan, H. (2019). Foreground–background separation technique for crack detection. Computer-Aided Civil and Infrastructure Engineering, 34(6), 457–470.
- Ni, F., Zhang, J., & Noori, M. N. (2020). Deep learning for data anomaly detection and data compression of a long-span suspension bridge. Computer-Aided Civil and Infrastructure Engineering, 35(7), 685–700.
- Ni, Y. Q., Xia, Y., Liao, W. Y., & Ko, J. M. (2009). Technology innovation in developing the structural health monitoring system for Guangzhou new TV tower. Structural Control and Health Monitoring, 16(1), 73–98.
- Nishitani, A., & Inoue, Y. (2001). Overview of the application of active/semiactive control to building structures in Japan. Earthquake Engineering & Structural Dynamics, 30(11), 1565–1574.
- Oh, B. K., Glisic, B., Kim, Y., & Park, H. S. (2019). Convolutional neural network-based wind-induced response estimation model for tall buildings. Computer-Aided Civil and Infrastructure Engineering, 34(10), 843–858.
- Ouyang, Y., Shi, W., Shan, J., & Spencer, B. F. (2019). Backstepping adaptive control for real-time hybrid simulation including servo-hydraulic dynamics. Mechanical Systems and Signal Processing, 130, 732–754.
- Ozbulut, O. E., Bitaraf, M., & Hurlebaus, S. (2011). Adaptive control of base-isolated structures against near-field earthquakes using variable friction dampers. Engineering Structures, 33(12), 3143–3154.
- Palacio-Betancur, A., & Gutierrez Soto, M. (2019). Adaptive tracking control for real-time hybrid simulation of structures subjected to seismic loading. Mechanical Systems and Signal Processing, 134, 106345.
- Pan, X., & Yang, T. Y. (2020). Post-disaster imaged-based damage detection and repair cost estimation of reinforced concrete buildings using dual convolutional neural networks. Computer-Aided Civil and Infrastructure Engineering, 35(5), 495–510.
- Qarib, H., & Adeli, H. (2014). Recent advances in health monitoring of civil structures. Scientia Iranica, 21(6), 1733–1742.
- Rafiei, M. H., & Adeli, H. (2017). A new neural dynamic classification algorithm. IEEE Transactions on Neural Networks and Learning Systems, 28(12), 3074–3083.
- Ray, L. R., Koh, B. H., & Tian, L. (2000). Damage detection and vibration control in smart plates: Towards multifunctional smart structures. Journal of Intelligent Material Systems and Structures, 11(9), 725–739.
- Ray, L. R., & Tian, L. (1999). Damage detection in smart structures through sensitivity-enhancing feedback control. Journal of Sound and Vibration, 227(5), 987–1002.
- Saaed, T. E., Nikolakopoulos, G., Jonasson, J. E., & Hedlund, H. (2015). A state-of-the-art review of structural control systems. Journal of Vibration and Control, 21(5), 919–937.
- Sampaio, R. P. C., Maia, N. M. M., Almeida, R. A. B., & Urgueira, A. P. V. (2016). A simple damage detection indicator using operational deflection shapes. Mechanical Systems and Signal Processing, 72, 629–641.
- Sanchez-Reolid, R., Martinez-Rodrigo, A., Lopez, M. T., & Fernández-Caballero, A. (2020). Deep support vector machines for the Identification of stress condition from electrodermal activity. International Journal of Neural Systems, 30(7), 2050031.
- Sandell, N., Varaiya, P., Athans, M., & Safonov, M. (1978). Survey of decentralized control methods for large scale systems. IEEE Transactions on Automatic Control, 23(2), 108–128.
- Sarlo, R., Tarazaga, P. A., & Kasarda, M. E. (2018). High resolution operational modal analysis on a five-story smart building under wind and human induced excitation. Engineering Structures, 176, 279–292.
- Schulz, M. J., Pai, P. F., & Inman, D. J. (1999). Health monitoring and active control of composite structures using piezoceramic patches. Composites Part B: Engineering, 30(7), 713–725.
- Sen, S., Crinière, A., Mevel, L., Cérou, F., & Dumoulin, J. (2018). Seismic-induced damage detection through parallel force and parameter estimation using an improved interacting particle-Kalman filter. Mechanical Systems and Signal Processing, 110, 231–247.
- Seo, J., Hu, J. W., & Lee, J. (2015). Summary review of structural health monitoring applications for highway bridges. Journal of Performance of Constructed Facilities, 30(4), 04015072.
- Shadan, F., Khoshnoudian, F., & Esfandiari, A. (2016). A frequency response-based structural damage identification using model updating method. Structural Control and Health Monitoring, 23(2), 286–302.
- Siljak, D. D. (1991). Decentralized control of complex systems. In Mathematics in science engineering (p. 184). Academic Press.
- Sirca, G. F., Jr., & Adeli, H. (2018). Infrared thermography for detecting defects in concrete structures. Journal of Civil Engineering and Management, 24(7), 508–515.
- Soong, T. T., Masri, S. F., & Housner, G. W. (1991). An overview of active structural control under seismic loads. Earthquake Spectra, 7(3), 483–505.
10.1193/1.1585638 Google Scholar
- Spencer, B. F., Jr., Jo, H., Mechitov, K. A., Li, J., Sim, S. H., Kim, R. E., Cho, S., Linderman, L. E., Moinzadeh, P., Giles, R. K., & Agha, G. (2016). Recent advances in wireless smart sensors for multi-scale monitoring and control of civil infrastructure. Journal of Civil Structural Health Monitoring, 6(1), 17–41.
- Spencer, B. F., Jr., & Nagarajaiah, S. (2003). State of the art of structural control. Journal of Structural Engineering, 129(7), 845–856.
- Sun, D., & Tong, L. (2003). Closed-loop based detection of debonding of piezoelectric actuator patches in controlled beams. International Journal of Solids and Structures, 40(10), 2449–2471.
- Symans, M. D., & Constantinou, M. C. (1999). Semi-active control systems for seismic protection of structures: A state-of-the-art review. Engineering Structures, 21(6), 469–487.
- Tidriri, K., Chatti, N., Verron, S., & Tiplica, T. (2016). Bridging data-driven and model-based approaches for process fault diagnosis and health monitoring: A review of researches and future challenges. Annual Reviews in Control, 42, 63–81.
- Vega, M. A., Schellenberg, A. H., Caudana, H., & Mosqueda, G. (2020). Implementation of real-time hybrid shake table testing using the UCSD large high-performance outdoor shake table. International Journal of Lifecycle Performance Engineering, 4(1-3), 80–102.
10.1504/IJLCPE.2020.108939 Google Scholar
- Vera-Olmos, F. J., Pardo, E., Melero, H., & Malpica, N. (2019). DeepEye: Deep convolutional network for pupil detection in real environments. Integrated Computer-Aided Engineering, 26(1), 85–95.
- Viscardi, M., & Lecce, L. (2002, 2002). An integrated system for active vibro-acoustic control and damage detection on a typical aeronautical structure. In Proceedings of the 2002 international conference on control applications (Vol. 1, pp. 477–482). IEEE.
10.1109/CCA.2002.1040232 Google Scholar
- Wang, H., Jasim, A., & Chen, X. (2018). Energy harvesting technologies in roadway and bridge for different applications–a comprehensive review. Applied Energy, 212, 1083–1094.
- Wang, J., Liu, X. Z., & Ni, Y. Q. (2017). A Bayesian probabilistic approach for acoustic emission-based rail condition assessment. Computer-Aided Civil and Infrastructure Engineering, 33(1), 21–34.
- Wang, N., & Adeli, H. (2014). Sustainable building design. Journal of Civil Engineering and Management, 20(1), 1–10.
- Wang, N., & Adeli, H. (2015). Self-constructing wavelet neural network algorithm for nonlinear control of large structures. Engineering Applications of Artificial Intelligence, 41, 249–258.
- Wang, Y., Lynch, J. P., & Law, K. H. (2009). Decentralized H∞ controller design for large-scale civil structures. Earthquake Engineering & Structural Dynamics, 38(3), 377–401.
- Wei, C., & Jing, X. (2017). A comprehensive review on vibration energy harvesting: Modelling and realization. Renewable and Sustainable Energy Reviews, 74, 1–18.
- Wongprasert, N., & Symans, M. D. (2005). Experimental evaluation of adaptive elastomeric base-isolated structures using variable-orifice fluid dampers. Journal of Structural Engineering, 131(6), 867–877.
- Wu, R. T., Ankush Singla, A., Jahanshahi, M. R., Bertino, E., Ko, B. J., & Verma, D. (2019). Pruning deep convolutional neural networks for efficient edge computing in condition assessment of civil infrastructures. Computer-Aided Civil and Infrastructure Engineering, 34(9), 774–789.
- Xu, Y. L., Huang, Q., Xia, Y., & Liu, H. J. (2015). Integration of health monitoring and vibration control for smart building structures with time-varying structural parameters and unknown excitations. Smart Structures and Systems, 15(3), 807–830.
- Xu, Y. L., Huang, Q., Zhan, S., Su, Z. Q., & Liu, H. J. (2014). FRF-based structural damage detection of controlled buildings with podium structures: Experimental investigation. Journal of Sound and Vibration, 333(13), 2762–2775.
- Xu, Y. L., Qu, W. L., & Ko, J. M. (2000). Seismic response control of frame structures using magnetorheological/electrorheological dampers. Earthquake Engineering & Structural Dynamics, 29(5), 557–575.
- Yan, R., & Gao, R. X. (2006). Hilbert–Huang transform-based vibration signal analysis for machine health monitoring. IEEE Transactions on Instrumentation and Measurement, 55(6), 2320–2329.
- Yang, H. T., Shan, J., Randall, C. J., Hansma, P. K., & Shi, W. (2013). Integration of health monitoring and control of building structures during earthquakes. Journal of Engineering Mechanics, 140(5), 04014013.
- Yang, T., Cappelle, C., Ruichek, Y., & El Bagdouri, M. (2019). Multi-object tracking with discriminant correlation filter based deep learning tracker. Integrated Computer-Aided Engineering, 26(3), 273–284.
- Yang, Y., Ding, S. X., & Li, L. (2015). On observer-based fault detection for nonlinear systems. Systems & Control Letters, 82, 18–25.
- Yao, L., Dong, Q., Jiang, J., & Ni, F. (2020). Deep reinforcement learning for long-term pavement maintenance planning. Computer-Aided Civil and Infrastructure Engineering, 35(11), 1230–1245.
- Yeganeh Fallah, A., & Taghikhany, T. (2016). A modified sliding mode fault tolerant control for large-scale civil infrastructure. Computer-Aided Civil and Infrastructure Engineering, 31(7), 550–561.
- Yeum, C. M., Dyke, S. J., Benes, B., Hacker, T., Ramirez, J., Lund, A., & Pujol, S. (2019). Postevent reconnaissance image documentation using automated classification. Journal of Performance of Constructed Facilities, 33(1), 04018103.
- Yi, F., Dyke, S. J., Caicedo, J. M., & Carlson, J. D. (2001). Experimental verification of multiinput seismic control strategies for smart dampers. Journal of Engineering Mechanics, 127(11), 1152–1164.
- Yoon, H., Shin, J., & Spencer, B. F., Jr. (2018). Structural displacement measurement using an unmanned aerial system. Computer-Aided Civil and Infrastructure Engineering, 33(3), 183–192.
- Yu, Y., Wang, C., Gu, X., & Li, J. (2018). A novel deep learning-based method for damage identification of smart building structures. Structural Health Monitoring, 18(1), 143–163.
- F. G. Yuan (Ed.). (2016). Structural health monitoring (SHM) in aerospace structures (Vol. 2016). Woodhead Publishing Series in Composites Science and Engineering. Elsevier Science.
- Yuen, K. V., Kuok, S. C., & Dong, L. (2019). Self-calibrating Bayesian real-time system identification. Computer-Aided Civil and Infrastructure Engineering, 34(9), 806–821.
- Zahrai, S. M., & Cheraghi, A. (2017). Reducing seismic vibrations of typical steel buildings using new multi-level yielding pipe damper. International Journal of Steel Structures, 17(3), 983–998.
- Zavadskas, E. K., Antucheviciene, J., Vilutiene, T., & Adeli, H. (2018). Sustainable decision-making in civil engineering, construction and building technology. Sustainability, 10(1), 14.
- Zelleke, D. H., & Matsagar, V. A. (2019). Semi-active algorithm for energy-based predictive structural control using tuned mass dampers. Computer-Aided Civil and Infrastructure Engineering, 34, 11.
- Zhang, A., Wang, K. C. P., Fei, Y., Liu, Y., Chen, C., Yang, G., Li, J. Q., Yang, E., & Qiu, S. (2019). Automated pixel-level pavement crack detection on 3D asphalt surfaces with a recurrent neural network. Computer-Aided Civil and Infrastructure Engineering, 34(3), 213–229.
- Zhang, D., & Wei, B. (2017). A review on model reference adaptive control of robotic manipulators. Annual Reviews in Control, 43, 188–198.
- Zhang, J. Y., & Aoki, T. (2020). A frequency-domain non-iterative algorithm for structural parameter identification of shear buildings subjected to frequent earthquakes. Computer-Aided Civil and Infrastructure Engineering, 35(6), 615–627.
- Zhang, W., Ahmed, S., Masters, S., Ounaies, Z., & Frecker, M. (2017). Finite element analysis of electroactive polymer and magnetoactive elastomer based actuation for origami folding. Smart Materials and Structures, 26(10), 105032.
- Zhang, X., Rajan, D., & Story, B. (2019). Concrete crack detection using context-aware deep semantic segmentation network. Computer-Aided Civil and Infrastructure Engineering, 34(11), 951–971.
- Zhang, Y., Miyamori, Y., Mikami, S., & Saito, T. (2019). Vibration-based structural state identification by a 1-dimensional convolutional neural network. Computer-Aided Civil and Infrastructure Engineering, 34(9), 822–839.
- Zhao, J., Lin, C. M., & Chao, F. (2019). Wavelet fuzzy brain emotional learning control system design for MIMO uncertain nonlinear systems. Frontiers in Neuroscience, 12, 918.
- Zhong, M., Song, Y., & Ding, S. X. (2015). Parity space-based fault detection for linear discrete time-varying systems with unknown input. Automatica, 59, 120–126.
- Zhou, L., Yan, G., Wang, L., & Ou, J. (2013). Review of benchmark studies and guidelines for structural health monitoring. Advances in Structural Engineering, 16(7), 1187–1206.
- Zhou, Y. L., Maia, N. M., & Abdel Wahab, M. (2018). Damage detection using transmissibility compressed by principal component analysis enhanced with distance measure. Journal of Vibration and Control, 24(10), 2001–2019.
- Zhou, Z., & Adeli, H. (2003). Time-frequency signal analysis of earthquake records using Mexican hat wavelets. Computer-Aided Civil and Infrastructure Engineering, 18(5), 379–389.
- Zhu, X., Jing, X., & Cheng, L. (2012). Magnetorheological fluid dampers: A review on structure design and analysis. Journal of Intelligent Material Systems and Structures, 23(8), 839–873.
