ORIGINAL PAPER
Investigating the effects of material density on strain rates in pressurized rotational cylinders
Priya Gulial,
Pankaj Thakur,
Priya Gulial
Department of Mathematics, ICFAI University, Baddi, Himachal Pradesh, India
Search for more papers by this authorCorresponding Author
Pankaj Thakur
Department of Mathematics, ICFAI University, Baddi, Himachal Pradesh, India
Correspondence
Pankaj Thakur, Department of Mathematics, ICFAI University, Baddi, Himachal Pradesh 174103, India.
Email: [email protected]
Search for more papers by this authorPriya Gulial,
Pankaj Thakur,
Priya Gulial
Department of Mathematics, ICFAI University, Baddi, Himachal Pradesh, India
Search for more papers by this authorCorresponding Author
Pankaj Thakur
Department of Mathematics, ICFAI University, Baddi, Himachal Pradesh, India
Correspondence
Pankaj Thakur, Department of Mathematics, ICFAI University, Baddi, Himachal Pradesh 174103, India.
Email: [email protected]
Search for more papers by this authorAbstract
This study investigates strain rates in internally pressurized rotating cylinders with varying density, using Norton's law to analyze the effects of anisotropy and the creep law exponent n. The research is significant for optimizing the design and durability of such cylinders in engineering applications. A detailed analysis revealed distinct strain rate patterns among anisotropic materials Types I and II exhibited lower circumferential strain rates compared to isotropic Type III materials, while Types I and III showed reduced axial strain rates relative to isotropic Type II materials. These findings suggest that anisotropic Types I and II materials offer superior stress-related performance, enhancing the durability of cylinders under pressure and rotation. The study's novelty lies in its comprehensive examination of anisotropy's influence on strain rates, extending beyond prior work by demonstrating how specific anisotropic materials outperform isotropic ones in reducing deformation and improving structural resilience.
CONFLICT OF INTEREST STATEMENT
Authors have no conflict of interest to declare.
REFERENCES
- 1Wahl, A.M.: Further studies of stress distribution in rotating disks and cylinders under elevated temperature creep conditions. J. Appl. Mech. 25, 243–250 (1958) https://doi.org/10.1115/1.4011752
10.1115/1.4011752 Google Scholar
- 2Finnie, I., Heller, W.R.: Sources of Data, Creep of Engineering Materials. McGraw-Hill, New York (1959)
- 3Finnie, I.: Steady-state creep of a thick-walled cylinder under combined axial load and internal pressure. Trans. ASME. 82(D), 689–694 (1960). https://doi.org/10.1115/1.3662706
10.1115/1.3662706 Google Scholar
- 4Schweiker, J.W., Sidebottom, O.M.: Creep of thick-walled cylinders subjected to internal pressure and axial load. Exp. Mech. 5, 186–192 (1965). https://doi.org/10.1007/BF02328425
10.1007/BF02328425 Google Scholar
- 5Pai, H.: Steady-state creep analysis of thick-walled orthotropic cylinders. Int. J. Mech. Sci. 9(6), 335–347 (1967). https://doi.org/10.1016/0020-7403(67)90039-2
10.1016/0020-7403(67)90039-2 Google Scholar
- 6Sim, R.G., Penny, R.K.: Plane strain creep behaviour of thick-walled cylinders. Int. J. Mech. Sci. 13(12), 987–1009 (1971). https://doi.org/10.1016/0020-7403(71)90023-3
10.1016/0020-7403(71)90023-3 Google Scholar
- 7Bhatnagar, N.S., Arya, V.K., Debnath, K.K.: Creep analysis of orthotropic rotating cylinder. J. Pressure Vessel Technol. 102, 371–377 (1980). https://doi.org/10.1115/1.3263347
- 8Bhatnagar, N.S., Kulkarni, P.S., Arya, V.K.: Creep analysis of an internally pressurised orthotropic rotating cylinder. Nucl. Eng. Des. 83, 379–388 (1984). https://doi.org/10.1016/0029-5493(84)90130-4
- 9Jones, I.A.: Approximate solutions to the orthotropic pinched cylinder problem. Compos. Struct. 42, 73–91 (1998). https://doi.org/10.1016/S0263-8223(97)00005-6
- 10Gao, X.L.: Elasto-plastic analysis of an internally pressurized thick-walled cylinder using a strain gradient plasticity theory. Int. J. Solids Struct. 40, 6445–6455 (2003). https://doi.org/10.1016/S0020-7683(03)00424-4
- 11Singh, T., Gupta, V.K.: Creep analysis of an internally pressurized thick cylinder made of a functionally graded composite. J. Strain Anal. Eng. Des. 44(7), 583–594 (2009). https://doi.org/10.1243/03093247JSA530
- 12Thakur, P.: Creep transitional stresses of orthotropic thick-walled cylinder under combined axial load under internal pressure. FACTA Univ. Ser.: Mech. Eng. 11, 13–18 (2013). http://facta.Junis.ni.ac.rs/me/me201301/me201301-02.pdf
- 13Iglesias, D.A., Martínez, J.A.R., Rubin, M.B.: Nonlinear axisymmetric vibrations of a hyperelastic orthotropic cylinder. Int. J. Non Linear Mech. 99, 131–143 (2018). https://doi.org/10.1016/j.ijnonlinmec.2017.11.007
10.1016/j.ijnonlinmec.2017.11.007 Google Scholar
- 14Askari, D., Ghasemi-Nejhad, M.N.: Generally cylindrical orthotropic constitutive modeling of matrix-filled carbon nanotubes: transverse mechanical properties and responses. J. Sandw. Struct. Mater. 22, 2330–2363 (2020). https://doi.org/10.1177/1099636218795377
- 15Sahni, M., Mehta, P.D., Sahni, R., et al.: Secondary creep analysis of FG rotating cylinder with exponential, linear and quadratic volume reinforcement. Materials. 15, 1803 (2022). https://doi.org/10.3390/ma15051803
- 16Singh, A., Gulial, P., Thakur, P.: Exploring the effective stress behavior of internally pressurized cylinders with varying density. Z. Angew. Math. Mech. 104(8), e202400254 (2024). https://doi.org/10.1002/zamm.202400254
- 17Thakur, P., Sethi, M., Gupta, K., Bhardwaj, R.K.: Thermal stress analysis in a hemispherical shell made of transversely isotropic materials under pressure and thermo-mechanical loads. J. Appl. Math. Mech. (ZAMM), 101(12), e202100208 (2021). https://doi.org/10.1002/zamm.202100208
10.1002/zamm.202100208 Google Scholar
- 18Thakur, P., Sethi, M., Kumar, N., et al.: Analytical solution of hyperbolic deformable disk having variable density. Mech. Solids. 56, 1039–1046 (2021). https://doi.org/10.3103/S0025654421060194
- 19Chand, S., Sood, S., Thakur, P., Gupta, K.: Elastoplastic stress deformation in an annular disk made of isotropic material and subjected to uniform pressure. Struct. Integr. Life. 23(1), 61–64 (2023). http://divk.inovacionicentar.rs/ivk/ivk23/OF2301-9.html
- 20Singh, N., Kaur, J., Thakur, P., Murali, G.: Structural behaviour of annular isotropic disk made of steel/copper material with gradually varying thickness subjected to internal pressure. Struct. Integr. Life. 23(3), 293–297 (2023). http://divk.inovacionicentar.rs/ivk/ivk23/OF2303-10.html
- 21Sukhvinder, Gulial, P., Pathania, D.S., et al.: Comparative study of creep in a disk made of rubber/copper material and fitted with rigid shaft. Struct. Integr. Life. 24(2), 159–166 (2024). https://doi.org/10.69644/ivk-2024-02-0159
- 22Sukhvinder, Gulial, P., Pathania, D.S., et al.: Thermal stress distribution in a tube of natural rubber /polyurethane material and subjected to internal pressure and mechanical load. Struct. Integr. Life. 24(2), 151–158 (2024). https://doi.org/10.69644/ivk-2024-02-0151
- 23Akbar, S., Zamir, T., Akram, J., Noor, T., Muhammad, T.: Simulation of hybrid boiling nano fluid flow with convective boundary conditions through a porous stretching sheet through Levenberg Marquardt artificial neural networks approach. Int. J. Heat Mass Transfer. 228, 125615 (2024). https://doi.org/10.1016/j.ijheatmasstransfer.2024.125615
- 24Alghamdi, M., Akbar, N.S., Zamir, T., Muhammad, T.: Double layered combined convective heated flow of Eyring-Powell fluid across an elevated stretched cylinder using intelligent computing approach. Case Stud. Therm. Eng. 54, 104009 (2024). https://doi.org/10.1016/j.csite.2024.104009
- 25Akbar, N.S., Akram, J., Hussainc, M.F., Maraj, E.N., Muhammad, T.: Thermal storage study and enhancement of heat transfer through hybrid Jeffrey nanofluid flow in ducts under peristaltic motion with entropy generation. Therm. Sci. Eng. Progress. 49, 102463 (2024). https://doi.org/10.1016/j.tsep.2024.102463
- 26Akbar, N.S., Rafiq, M., Muhammad, T., et al.: Microbic flow analysis of nano fluid with chemical reaction in microchannel with flexural walls under the effects of thermophoretic diffusion. Sci. Rep. 14, 1474 (2024). https://doi.org/10.1038/s41598-023-50915-6
- 27Akbar, N.S., Zamir, T., Noor, T., Muhammad, T., Mohamed, R.A.: Heat transfer enhancement using ternary hybrid nanofluid for cross-viscosity model with intelligent Levenberg-Marquardt neural networks approach incorporating entropy generation. Case Stud. Therm. Eng. 63, 105290 (2024). https://doi.org/10.1016/j.csite.2024.105290
- 28Kaur, J., Singh, N., Thakur, P.: Heat-driven stress: Comprehending thermal dynamics in solid disks with varying different densities. J. Appl. Math. Mech. (2024). https://doi.org/10.1002/zamm.202401087
10.1002/zamm.202401087 Google Scholar
- 29Temesgen, A.G., Singh, S.B., Thakur, P.: Modeling of creep deformation of a transversely isotropic rotating disc with a shaft having variable density and subjected to a thermal gradient. Therm. Sci. Eng. Progress. 20, 100745 (2020). https://doi.org/10.1016/j.tsep.2020.100745
10.1016/j.tsep.2020.100745 Google Scholar
