Volume 56, Issue 5 pp. 1033-1040
Full Paper

Fully balanced steady-state 3D-spin-echo (bSSSE) imaging at 3 Tesla

R. Krug

Corresponding Author

R. Krug

Musculoskeletal and Quantitative Imaging Research (MQIR), Department of Radiology, University of California–San Francisco, San Francisco, California, USA

QB3 Building, 2nd floor, #203, 1700 Fourth St., San Francisco, CA 94143-2520===Search for more papers by this author
E.T. Han

E.T. Han

Applied Science Lab West, GE Healthcare, Menlo Park, California, USA

Search for more papers by this author
S. Banerjee

S. Banerjee

Musculoskeletal and Quantitative Imaging Research (MQIR), Department of Radiology, University of California–San Francisco, San Francisco, California, USA

Search for more papers by this author
S. Majumdar

S. Majumdar

Musculoskeletal and Quantitative Imaging Research (MQIR), Department of Radiology, University of California–San Francisco, San Francisco, California, USA

Search for more papers by this author
First published: 19 September 2006
Citations: 26

Abstract

In this work a 3D fully balanced steady-state spin-echo sequence (bSSSE) was designed and implemented on a 3-Tesla whole-body MR scanner. In contrast to previously introduced nonbalanced SSSE (nbSSSE) sequences, bSSSE features fully rewound imaging gradients. Additionally, all phase encodings and the readout prephasing are performed after the refocusing pulse. Its performance was compared with previously used gradient-echo (GE) and nbSSSE sequences. The signal response of each sequence was simulated by numerical solution of the Bloch equation. All sequences were then optimized based on these simulations for high-resolution (HR) imaging of tissues with short relaxation times and applied to in vivo HR-MRI of trabecular bone. bSSSE outperformed nbSSSE sequences in terms of SNR and SNR efficiency. Measurements of structural bone parameters revealed thinner trabeculae and a lower bone/bone-marrow fraction for the bSSSE sequence compared to the nbSSSE sequence. By applying a parallel imaging technique based on generalized autocalibrating partially parallel acquisition (GRAPPA) with a reduction factor of 2, we were able to maintain a clinically feasible scan time using bSSSE. Comparisons of structural bone parameters revealed a difference of less than 3% for all structural parameters between parallel and conventional imaging. Magn Reson Med, 2006. © 2006 Wiley-Liss, Inc.

The full text of this article hosted at iucr.org is unavailable due to technical difficulties.