Article
Bio-based hydrophobic epoxy-amine networks derived from renewable terpenoids
Michael D. Garrison,
Benjamin G. Harvey,
Michael D. Garrison
US NAVY, NAWCWD, Research Office, Chemistry Branch, China Lake, California, 93555
Search for more papers by this authorCorresponding Author
Benjamin G. Harvey
US NAVY, NAWCWD, Research Office, Chemistry Branch, China Lake, California, 93555
Correspondence to: B. G. Harvey (E-mail: [email protected])Search for more papers by this authorMichael D. Garrison,
Benjamin G. Harvey,
Michael D. Garrison
US NAVY, NAWCWD, Research Office, Chemistry Branch, China Lake, California, 93555
Search for more papers by this authorCorresponding Author
Benjamin G. Harvey
US NAVY, NAWCWD, Research Office, Chemistry Branch, China Lake, California, 93555
Correspondence to: B. G. Harvey (E-mail: [email protected])Search for more papers by this authorABSTRACT
Carvacrol and p-cymene are sustainable and versatile starting materials for the preparation of hydrophobic monomers. These molecules can be readily derived from pine resin or produced from other sustainable feedstocks via a biosynthetic approach. A hydrophobic epoxy monomer [bis(2-isopropyl-5-methyl-4-(oxiran-2-ylmethoxy)phenyl)methane, 3] with methyl and isopropyl substituents on the aromatic rings was synthesized from carvacrol. A bisaniline [4,4′-methylenebis(5-isopropyl-2-methylaniline, 4] was then synthesized from p-cymene. Using a cured epoxy-amine network prepared from the diglycidyl ether of bisphenol A (DGEBA) and 4,4′-methylenedianiline (MDA) as a baseline system, three additional networks were prepared from DGEBA:4, 3:MDA, and 3:4. The cured epoxy-amine networks were tested for moisture uptake as well as changes in thermomechanical properties after exposure to boiling water for several days. Incorporation of the bio-based monomers resulted in up to 53% lower water uptake compared to the baseline system. The bio-based resins also showed greater resistance to degradation under hot-wet conditions, with wet-TG knockdowns as low as 8% as compared to a 19% decrease for the baseline system. These results show that the unique functionality of the renewable bisphenol and aniline used in this study can result in materials with improved hot/wet performance as compared to conventional thermosetting resins. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016, 133, 43621.
Supporting Information
Additional Supporting Information may be found in the online version of this article.
| Filename | Description |
|---|---|
| app43621-sup-0001-suppinfo.docx548.3 KB |
Supporting Information |
Please note: The publisher is not responsible for the content or functionality of any supporting information supplied by the authors. Any queries (other than missing content) should be directed to the corresponding author for the article.
REFERENCES
- 1 Wilbon, P. A.; Chu, F.; Tang, C. Macromol. Rapid Commun. 2013, 34, 8.
- 2 Gandini, A. Green Chem. 2011, 13, 1061.
- 3 Auvergne, R.; Caillol, S.; David, G.; Boutevin, B.; Pascault, J.-P. Chem. Rev. 2014, 114, 1082.
- 4 Harvey, B. G.; Guenthner, A. J.; Lai, W. W.; Meylemans, H. A.; Davis, M. C.; Cambrea, L. R.; Reams, J. T.; Lamison, K. R. Macromolecules 2015, 48, 3173.
- 5 Harvey, B. G.; Guenthner, A. J.; Meylemans, H. A.; Haines, S. R. L.; Lamison, K. R.; Groshens, T. J.; Cambrea, L. R.; Davis, M. C.; Lai, W. W. Green Chem. 2015, 17, 1249.
- 6 Meylemans, H. A.; Groshens, T. J.; Harvey, B. G. ChemSusChem 2012, 5, 206.
- 7 Meylemans, H. A.; Harvey, B. G.; Reams, J. T.; Guenthner, A. J.; Cambrea, L. R.; Groshens, T. J.; Baldwin, L. C.; Garrison, M. D.; Mabry, J. M. Biomacromolecules 2013, 14, 771.
- 8 Fache, M.; Boutevin, B.; Caillol, S. Eur. Polym. J. 2015, 68, 488.
- 9 Davis, M. C.; Parrish, D. A.; Harvey, B. G. Org. Prep. Proc. Intern. 2013, 45, 304.
- 10 Harvey, B. G.; Guenthner, A. J.; Yandek, G. R.; Cambrea, L. R.; Meylemans, H. A.; Baldwin, L. C.; Reams, J. T. Polymer 2014, 55, 5073.
- 11 Harvey, B. G.; Sahagun, C. M.; Guenthner, A. J.; Groshens, T. J.; Cambrea, L. R.; Reams, J. T.; Mabry, J. M. ChemSusChem. 2014, 7, 1964.
- 12 Schutyser, W.; Koelewijn, S. F.; Dusselier, M.; Van de Vyver, S.; Thomas, J.; Yu, F.; Carbone, M. J.; Smet, M.; Van Puyvelde, P.; Dehaen, W.; Sels, B. F. Green Chem. 2014, 16, 1999.
- 13 Cash, J. J.; Davis, M. C.; Ford, M. D.; Groshens, T. J.; Guenthner, A. J.; Harvey, B. G.; Lamison, K. R.; Mabry, J. M.; Meylemans, H. A.; Reams, J. T. Polym. Chem. 2013, 4, 3859.
- 14 Davis, M. C.; Guenthner, A. J.; Groshens, T. J.; Reams, J. T.; Mabry, J. M. J. Polym. Sci. Part A: Polym. Chem. 2012, 50, 4127.
- 15 Van de Vyver, S.; Geboers, J.; Helsen, S.; Yu, F.; Thomas, J.; Smet, M.; Dehaen, W.; Sels, B. F. Chem. Commun. 2012, 48, 3497.
- 16 Zúñiga, C.; Larrechi, M. S.; Lligadas, G.; Ronda, J. C.; Galià, M.; Cádiz, V. J. Polym. Sci. Part A: Polym. Chem. 2011, 49, 1219.
- 17 Morley, K. L.; Grosse, S.; Leisch, H.; Lau, P. C. K. Green Chem. 2013, 15, 3312.
- 18 Voirin, C.; Caillol, S.; Sadavarte, N. V.; Tawade, B. V.; Boutevin, B.; Wadgaonkar, P. P. Polym. Chem. 2014, 5, 3142.
- 19 Staples, C. A.; Dome, P. B.; Klecka, G. M.; Oblock, S. T.; Harris, L. R. Chemosphere 1998, 36, 2149.
- 20 Tyl, R. W.; Myers, C. B.; Marr, M. C.; Thomas, B. F.; Keimowitz, A. R.; Brine, D. R.; Veselica, M. M.; Fail, P. A.; Chang, T. Y.; Seely, J. C.; Joiner, R. L.; Butala, J. H.; Dimond, S. S.; Cagen, S. Z.; Shiotsuka, R. N.; Stropp, G. D.; Waechter, J. M. Toxicol. Sci. 2002, 68, 121.
- 21 Chen, M. Y.; Ike, M.; Fujita, M. Environ. Toxicol. 2002, 17, 80.
- 22 Niederst, J.; Evans, R. H.; O'Brien, R. M.; Romagnoli, K.; Von Maier, M. S. U.S. Patent Application 2013/0316109, (2013).
- 23 Zhang, X.; Lambert, J. C.; Doll, M. A.; Walraven, J. M.; Arteel, G. E.; Heln, D. W. J. Pharmacol. Experiment. Therap 2006, 316, 289.
- 24 Weiss, T.; Schuster, H.; Müller, J.; Schaller, K.-H.; Drexler, H.; Angerer, J.; Käfferlein, H. U. Ann. Occup. Hyg. 2011, 55, 886–892.
- 25 Erman, W. F. Chemistry of Monoterpenes; Marcel Dekker: New York, 1985.
- 26 Belgacem, M. N.; Gandini, A. Monomers, Polymers and Composites from Renewable Resources; Elsevier: Amsterdam, 2008.
- 27 Lu, J.; Kamigaito, M.; Sawamoto, M.; Higashimura, T.; Deng, Y. X. Macromolecules 1997, 30, 27.
- 28 Mathers, R. T.; Damodaran, K.; Rendos, M. G.; Lavrich, M. S. Macromolecules 2009, 42, 1512.
- 29 Satoh, K.; Matsuda, M.; Nagai, K.; Kamigato, M. J. Am. Chem. Soc. 2010, 132, 10003.
- 30 Martin-Luengo, M. A.; Yates, M.; Domingo, M. J. M.; Casal, B.; Iglesias, M.; Esteban, M.; Ruiz-Hitsky, E. R. Appl. Catal. B: Environ. 2008, 81, 218.
- 31 Martin-Luengo, M. A.; Yates, M.; Rojo, E. S.; Arribus, D. H.; Aguilar, D.; Hitzky, E. R. Appl. Catal. A: Gen. 2010, 387, 141.
- 32 Kamitsou, M.; Panagiotou, G. D.; Triantafyllidis, K. S.; Bourikas, K.; Lycourghiotis, A.; Kordulis, C. Appl. Catal. A: Gen. 2014, 474, 224.
- 33 Meylemans, H. A.; Quintana, R. L.; Rex, M. L.; Harvey, B. G. J. Chem. Technol. Biotechnol. 2014, 89, 957.
- 34 Leita, B. A.; Warden, A. C.; Burke, N.; O'Shea, M. S.; Trimm, D. Green Chem. 2010, 12, 70.
- 35 Harvey, B. G.; Wright, M. E.; Quintana, R. L. Energy Fuels 2010, 24, 267.
- 36 Fachini-Queiroz, F. C.; Kummer, R.; Estevão-Silva, C. F.; de Barros Carvalho, M. D.; Cunha, J. M.; Grespan, R.; Aparecida, B.-A.; Cuman, R. K. N. Evid Based Complement. Alternat. Med. 2012, 2012, 10. DOI: 10.1155/2012/657026
- 37 De Falco, E.; Mancini, E.; Roscigno, G.; Mignola, E.; Taglialatela-Scafati, O.; Senatore, F. Molecules 2013, 18, 14948.
- 38 Sökmen, M.; Serkedjieva, J.; Daferera, D.; Gulluce, M.; Polissiou, M.; Tepe, B.; Akpulat, H. A.; Sahin, F.; Sokmen, A. J. Agric. Food Chem. 2004, 52, 3309.
- 39 Gibbs, H. D.; Phillips, M. J. Ind. Eng. Chem. 1920, 12, 145.
- 40 Singh, B.; Patial, J.; Sharma, P.; Chandra, S.; Kaul, P.; Maity, S. Ind. J. Chem. Technol. 2011, 18, 21.
- 41 Royals, E. E.; Horne, S. E. J. Am. Chem. Soc. 1951, 73, 5856.
- 42 Rothenberger, O. S.; Krasnoff, S. B.; Rollins, R. B. J. Chem. Educ. 1980, 57, 741.
- 43 Maksimchuk, N. V.; Kovalenko, K. A.; Fedin, V. P.; Kholdeeva, O. A. Adv. Synth. Catal. 2010, 352, 2943.
- 44 Costa, V. V.; da Silva Rocha, K. A.; Kozhevnikov, I. V.; Kozhevnikova, E. F.; Gusevskaya, E. V. Catal. Sci. Technol. 2013, 3, 244.
- 45 Wallach, O. Justus. Leibigs. Ann. Der. Chemie. 1895, 286, 90.
- 46 Harvey, B. G.; Guenthner, A. J.; Koontz, T. A.; Storch, P. J.; Reams, J. T.; Groshens, T. J. Green Chem. 2016, DOI: 10.1039/C5GC02893K
- 47 Zhou, J.; Lucas, J. P. Polymer 1999, 40, 5513.
- 48 Frigione, M.; Lettieri, M. J. Polym. Sci. Part B: Polym. Phys. 2008, 46, 1320.
- 49 Luo, S.; Leisen, J.; Wong, C. P. J. Appl. Polym. Sci. 2002, 85, 1.
- 50 Ito, S.; Hashimoto, M.; Wadgaonkar, B.; Svizero, N.; Carvalho, R. M.; Yiu, C.; Rueggeberg, F. A.; Foulger, S.; Saito, T.; Nishitani, Y.; Yoshiyama, M.; Tay, F. R.; Pashley, D. H. Biomaterials 2005, 26, 6449.
- 51 Choi, S.; Phantu, A.; Douglas, E. P. J. Appl. Polym. Sci. 2012, 125, 3778.
- 52 Colombini, D.; Martinez-Vega, J. J.; Merle, G. Polymer 2002, 43, 4479.
- 53 Bellenger, V.; Verdu, J. J. Mater. Sci. 1989, 24, 63.
- 54 Mensitieri, G.; Lavorgna, M.; Musto, P.; Ragosta, G. Polymer 2006, 47, 8326.
- 55 Li, L.; Liu, M.; Li, S. Polymer 2004, 45, 2837.
- 56 Nie, L.; Burgess, A.; Ryan, A. Macromol. Chem. Phys. 2013, 214, 225.
- 57 Frank, K.; Wiggins, J. J. Appl. Polym. Sci. 2013, 130, 264.
- 58 Grave, C.; McEwan, I.; Pethrick, I. A. J. Appl. Polym. Sci 1998, 69, 2369.
- 59 Diamant, Y.; Marom, G.; Broutman, L. J. J. Appl. Polym. Sci. 1981, 26, 3015.
- 60 Li, L.; Yu, Y.; Wu, Q.; Zhan, G.; Li, S. Corros. Sci. 2009, 51, 3000.
- 61 Soles, C. L.; Chang, F. T.; Gidley, D. W.; Yee, A. F. J. Polym. Sci. Part B: Polym. Phys. 2000, 38, 776.
- 62 Soles, C. L.; Yee, A. F. J. Polym. Sci. Part B: Polym. Phys. 2000, 38, 792.
- 63 Soles, C. L.; Chang, F. T.; Bolan, B. A.; Hristov, H. A.; Gidley, D. W.; Yee, A. F. J. Polym. Sci. Part B: Polym. Phys. 1998, 36, 3035.
- 64 Frank, K.; Childers, C.; Dutta, D.; Gidley, D.; Jackson, M.; Ward, S.; Maskell, R.; Wiggins, J. Polymer 2013, 54, 403.
- 65 Maxwell, I. D.; Pethrick, R. A. J. Appl. Polym. Sci 1983, 28, 2363.
- 66 Enns, J. B.; Gillham, J. K. J. Appl. Polym. Sci. 1983, 28, 2831.
- 67 Dang, D. N.; Cohendoz, S.; Mallarino, S.; Feaugas, X.; Touzain, S. J. Appl. Polym. Sci. 2013, 129, 2451.
- 68 Cotugno, S.; Mensitieri, G.; Musto, P.; Sanguigno, L. Macromolecules 2005, 38, 801.
- 69 Jackson, M.; Kaushik, M.; Nazarenko, S.; Ward, S.; Maskell, R.; Wiggins, J. Polymer 2011, 52, 4528.
- 70 Tai, H. J.; Wang, J. B.; Chen, J. H.; Chou, H. L. J. Appl. Polym. Sci. 2001, 79, 652.
- 71 Sauvant, V.; Halary, J. L. J. Appl. Polym. Sci. 2001, 82, 759.
- 72 Sauvant, V.; Halary, J. L. Compos. Sci. Technol. 2002, 62, 481.
- 73 Chateauminois, A.; Sauvant, V.; Halary, J. L. Polym. Int. 2003, 52, 507.
- 74 Liu, M.; Ding, Y.; Wang, M.; Li, S.; Liu, W.; Wang, B. J. Polym. Sci. Part B: Polym. Phys. 2003, 41, 1135.
- 75 Ding, Y.; Liu, M.; Li, S.; Zhang, S.; Zhou, W. F.; Wang, B. Macromol. Chem. Phys. 2001, 202, 2681.
- 76 Shimp, D. A. Polym. Mater. Sci. Eng. 1986, 54, 107.
- 77 Shimp, D. A. U.S. Pat. 4,604,452 (1986).
- 78 Guenthner, A. J.; Wright, M. E.; Chafin, A. P.; Reams, J. T.; Lamison, K. R.; Ford, M. D.; Kirby, S. P. J.; Zavala, J. J.; Mabry, J. M. Macromolecules 2014, 47, 7691.
- 79 J. I. Kroschwitz, Ed. Encyclopedia of Polymer Science and Engineering, Vol. 6; Wiley: New York, 1986; Epoxy Resins, 326.
- 80 Wisanrakkit, G.; Gillham, J. K. J. Appl. Polym. Sci. 1990, 41, 2885.
- 81 Kobe, K. A.; Langworthy, E. M. Indus. Eng. Chem. 1957, 49, 801.
- 82 Karkanas, P. I.; Partridge, I. K. J. Appl. Polym. Sci. 2000, 77, 1419.
- 83 Hardt, P.; Völker, T. U.S. Pat 5,286,874 (1994).
- 84 Girard-Reydet, E.; Riccardi, C. C.; Sautereau, H.; Pascault, J. P. Macromolecules 1995, 28, 7599.
- 85
Eloundou, J. P.;
Ayina, O.;
Nga, H. N.;
Gerard, J. F.;
Pascault, J. P.;
Boiteux, G.;
Seytre, G. J. Polym. Sci. Part B: Polym. Phys. 1998, 36, 2911.
10.1002/(SICI)1099-0488(19981130)36:16<2911::AID-POLB6>3.0.CO;2-Z CAS Web of Science® Google Scholar
- 86 Prime, R. B. In Thermal Characterization of Polymeric Materials, 2nd ed.; E. A. Turi Ed.; Academic Press: San Diego, 1997; p 1379.
- 87
Prime, R. B. In Thermal Analysis of Polymers; J. D. Menczel Ed.; Wiley: Hoboken, NJ, 2009; p 7.
10.1002/9780470423837.ch2 Google Scholar
- 88 Riccardi, C. C.; Adabbo, H. E.; Williams, R. J. J. J. Appl. Polym. Sci. 1984, 29, 2481.
- 89 Morel, E.; Bellenger, V.; Verdu, J. Polymer 1985, 26, 1719.
- 90
Odian, G. Principles of Polymerization, 4th ed.; Wiley: Hoboken, NJ, 2004; p 24.
10.1002/047147875X Google Scholar
- 91
Chawla, K. K. Composite Materials: Science and Engineering, 3th ed.; Springer: New York, 2012; p 137.
10.1007/978-0-387-74365-3 Google Scholar
