Microwave and Optical Technology Letters

THIS ARTICLE HAS BEEN RETRACTED

RETRACTED: Planar rectangular split ring shape band-pass structures

Retraction(s) for this article

Corresponding Author

Jan-Dong Tseng

[email protected]

Department of Electronic Engineering, National Chin Yi University of Technology, No.35, Lane 215, Sec. 1 Chung Shan Road, Taiping City, Taichung County, 411, Taiwan, Republic of China

Department of Electronic Engineering, National Chin Yi University of Technology, No.35, Lane 215, Sec. 1 Chung Shan Road, Taiping City, Taichung County, 411, Taiwan, Republic of ChinaSearch for more papers by this author

Wei-Geo Chang,

Wei-Geo Chang

Department of Electronic Engineering, National Chin Yi University of Technology, No.35, Lane 215, Sec. 1 Chung Shan Road, Taiping City, Taichung County, 411, Taiwan, Republic of China

Search for more papers by this author

Jan-Dong Tseng,

Corresponding Author

Jan-Dong Tseng

[email protected]

Department of Electronic Engineering, National Chin Yi University of Technology, No.35, Lane 215, Sec. 1 Chung Shan Road, Taiping City, Taichung County, 411, Taiwan, Republic of China

Wei-Geo Chang,

Wei-Geo Chang

Department of Electronic Engineering, National Chin Yi University of Technology, No.35, Lane 215, Sec. 1 Chung Shan Road, Taiping City, Taichung County, 411, Taiwan, Republic of China

Search for more papers by this author

First published: 27 July 2007

https://doi.org/10.1002/mop.22794

Citations: 3

About

PDF

Tools

Share a link

Email
Wechat
Bluesky

Abstract

A planar rectangular split ring shaped band-pass structure is proposed and analyzed by coupled line equivalent circuit instead of commonly used LC resonator circuit. The derived results were then used to design two- and three-cascaded rectangular split ring shape structures. Two prototypes were both designed at center frequency at 2.45 GHz, simulated by microwave simulators: IE3D and microwave office, and fabricated on FR-4 substrate. The simulated and experimental results show good agreement within 0–10 GHz. © 2007 Wiley Periodicals, Inc. Microwave Opt Technol Lett 49: 2520–2523, 2007; Published online in Wiley InterScience (www.interscience.wiley.com) DOI 10.1002/mop.22794

REFERENCES

1 J.B. Pendry, A.J. Holden, D.J. Robbins, and W.J. Stewart, Magnetism from conductors and enhanced nonlinear phenomena, IEEE Trans Microwave Theory Tech 47 (1999), 2075–2084.
10.1109/22.798002
Web of Science® Google Scholar
2 J.B. Pendry, A.J. Holden, W.J. Stewart, and I. Youngs, Low frequency plasmons in thin wire structures, J Phys Condens Matter 10 (1998), 4785–4809.
10.1088/0953-8984/10/22/007
CAS Web of Science® Google Scholar
3 R. Marques and M.J. Freire, On the usefulness of split ring resonators for magnetic metamaterial design at infrared and optical frequencies, electrotechnical conference, 2006, IEEE Mediterr (2006) 222–224.
Google Scholar
4 K. Shepard and G. Zinkann, A 145 MHz niobium split-ring resonator for particle velocities from 0.12 to 0.23 c, IEEE Trans Magn 19 (1983), 1312–1314.
10.1109/TMAG.1983.1062559
Web of Science® Google Scholar
5 F. Iza and J.A. Hopwood, Low-power microwave plasma source based on a microstrip split-ring resonator, IEEE Trans Plasma Sci 31 (2003), 782–787.
10.1109/TPS.2003.815470
Web of Science® Google Scholar
6 J. Bonache, I. Gil, J. Garcia-Garcia, and F. Martin, Novel microstrip bandpass filters based on complementary split-ring resonators, IEEE Trans Microwave Theory Tech 54 (2006), 265–271.
10.1109/TMTT.2005.861664
Web of Science® Google Scholar
7 J. Jung, C.S. Cho, J.W. Lee, J. Kim, and T.H. Kim, A low phase noise microwave oscillator using split ring resonators, 36th European, microwave conference, September 2006, pp. 95–98.
Google Scholar
8 J. Bonache, I. Gil, J. Garcia-Garcia, and F. Martin, Complementary split ring resonators for microstrip diplexer design, Electron Lett 41 (2005), 810–811.
10.1049/el:20050895
Web of Science® Google Scholar
9 J. Garcia-Garcia, F. Martin, F. Falcone, J. Bonache, I. Gil, T. Lopetegi, M.A.G. Laso, M. Sorolla, and R. Marques, Spurious passband suppression in microstrip coupled line band pass filters by means of split ring resonators, IEEE Microwave Wireless Compon Lett 14 (2004), 416–418.
10.1109/LMWC.2004.832066
Web of Science® Google Scholar
10 J. Martel, R. Marques, F. Falcone, J.D. Baena, F. Medina, F. Martin, and M. Sorolla, A new LC series element for compact bandpass filter design, IEEE Microwave Wireless Compon Lett 14 (2004), 210–212.
10.1109/LMWC.2004.827836
Web of Science® Google Scholar
11 J. Kim, C.S. Cho, and J.W. Lee, CPW bandstop filter using slot-type SRRs, Electron Lett 41 (2005), 1333–1334.
10.1049/el:20053306
Web of Science® Google Scholar
12 C. Li, K.-Y. Liu, and F. Li, Design of microstrip highpass filters with complementary split ring resonators, Electron Lett 43 (2007), 35–36.
10.1049/el:20072945
CAS Web of Science® Google Scholar
13 J. Martel, et al. Design of wide-band semi-lumped bandpass filters using open split ring resonators, IEEE Microwave Wireless Compon Lett 17 (2007), 28–30.
10.1109/LMWC.2006.887246
Web of Science® Google Scholar
14 G.I. Zysman and A.K. Johnson, Coupled transmission line networks in an inhomogeneous dielectric medium, IEEE Trans Microwave Theory Tech MTT-17 (1969), pp. 753–759.
10.1109/TMTT.1969.1127055
Web of Science® Google Scholar
15 D.A. Frickey, Conversions between S, Z, Y, H, ABCD, and T parameters which are valid for complex source and load impedances, IEEE Trans Microwave Theory Tech 42 (1994), 205–211.
10.1109/22.275248
Web of Science® Google Scholar
16 G.L. Matthaei, L. Young, and E.M.T. Jones, Microwave filters, impedance-matching networks, and coupling structures, Artech House, Norwood, MA, 1980.
Google Scholar
17 J.-S. Hong and M. J. Lancaster, Micrstrip filters for RF/microwave applications, Wiley, New York, NY 2001.
10.1002/0471221619
Google Scholar

Citing Literature

Volume49, Issue10

October 2007

Pages 2520-2523

RETRACTED: Planar rectangular split ring shape band-pass structures

Retraction(s) for this article

Retraction: “Planar rectangular split ring shape band-pass structures,” by Jan-Dong Tseng and Wei-Geo Chang

Abstract

REFERENCES

Citing Literature

References

Information

About Wiley Online Library

Help & Support

Opportunities

Connect with Wiley

RETRACTED: Planar rectangular split ring shape band-pass structures

Retraction(s) for this article

Retraction: “Planar rectangular split ring shape band-pass structures,” by Jan-Dong Tseng and Wei-Geo Chang

Abstract

REFERENCES

Citing Literature

References

Related

Information