The preparation of different types of reclaimed rubber and their applications in tire inner liner
Yunhui Xu
College of Materials Engineering, Xuzhou College of Industrial Technology, Xuzhou, People's Republic of China
Contribution: Conceptualization (equal), Funding acquisition (lead), Methodology (equal), Project administration (lead), Supervision (equal), Visualization (equal), Writing - review & editing (equal)
Search for more papers by this authorCorresponding Author
Shifeng Wang
Department of Polymer Science and Engineering, Shanghai Jiao Tong University, Shanghai, People's Republic of China
Correspondence
Shifeng Wang, Department of Polymer Science and Engineering, Shanghai Jiao Tong University, Shanghai 200240, People's Republic of China.
Email: [email protected]
Contribution: Conceptualization (equal), Data curation (equal), Resources (supporting), Supervision (equal), Writing - review & editing (lead)
Search for more papers by this authorZaheer ul Haq
Department of Polymer Science and Engineering, Shanghai Jiao Tong University, Shanghai, People's Republic of China
Contribution: Data curation (lead), Software (lead), Writing - original draft (lead), Writing - review & editing (equal)
Search for more papers by this authorTeng Ren
Department of Polymer Science and Engineering, Shanghai Jiao Tong University, Shanghai, People's Republic of China
Contribution: Writing - review & editing (equal)
Search for more papers by this authorZhenggang Luo
College of Materials Engineering, Xuzhou College of Industrial Technology, Xuzhou, People's Republic of China
Contribution: Data curation (equal)
Search for more papers by this authorHui Tu
College of Materials Engineering, Xuzhou College of Industrial Technology, Xuzhou, People's Republic of China
Contribution: Data curation (equal)
Search for more papers by this authorZaixue Wang
College of Materials Engineering, Xuzhou College of Industrial Technology, Xuzhou, People's Republic of China
Contribution: Data curation (equal), Resources (equal), Software (equal)
Search for more papers by this authorMin Deng
College of Materials Engineering, Xuzhou College of Industrial Technology, Xuzhou, People's Republic of China
Contribution: Software (equal)
Search for more papers by this authorJianming Zhang
Rubber & Plastic Materials and Engineering Ministry of Education Key Laboratory, Qingdao University of Science and Technology, Qingdao, People's Republic of China
Contribution: Data curation (equal), Methodology (equal)
Search for more papers by this authorYanan Zang
College of Materials Engineering, Xuzhou College of Industrial Technology, Xuzhou, People's Republic of China
Contribution: Data curation (supporting), Methodology (supporting)
Search for more papers by this authorPeipei Li
College of Materials Engineering, Xuzhou College of Industrial Technology, Xuzhou, People's Republic of China
Contribution: Software (supporting)
Search for more papers by this authorHouluo Cong
College of Materials Engineering, Xuzhou College of Industrial Technology, Xuzhou, People's Republic of China
Contribution: Formal analysis (supporting)
Search for more papers by this authorShuaishuai Song
College of Materials Engineering, Xuzhou College of Industrial Technology, Xuzhou, People's Republic of China
Contribution: Methodology (supporting)
Search for more papers by this authorFeng Liu
College of Materials Engineering, Xuzhou College of Industrial Technology, Xuzhou, People's Republic of China
Contribution: Data curation (supporting), Methodology (supporting)
Search for more papers by this authorYunhui Xu
College of Materials Engineering, Xuzhou College of Industrial Technology, Xuzhou, People's Republic of China
Contribution: Conceptualization (equal), Funding acquisition (lead), Methodology (equal), Project administration (lead), Supervision (equal), Visualization (equal), Writing - review & editing (equal)
Search for more papers by this authorCorresponding Author
Shifeng Wang
Department of Polymer Science and Engineering, Shanghai Jiao Tong University, Shanghai, People's Republic of China
Correspondence
Shifeng Wang, Department of Polymer Science and Engineering, Shanghai Jiao Tong University, Shanghai 200240, People's Republic of China.
Email: [email protected]
Contribution: Conceptualization (equal), Data curation (equal), Resources (supporting), Supervision (equal), Writing - review & editing (lead)
Search for more papers by this authorZaheer ul Haq
Department of Polymer Science and Engineering, Shanghai Jiao Tong University, Shanghai, People's Republic of China
Contribution: Data curation (lead), Software (lead), Writing - original draft (lead), Writing - review & editing (equal)
Search for more papers by this authorTeng Ren
Department of Polymer Science and Engineering, Shanghai Jiao Tong University, Shanghai, People's Republic of China
Contribution: Writing - review & editing (equal)
Search for more papers by this authorZhenggang Luo
College of Materials Engineering, Xuzhou College of Industrial Technology, Xuzhou, People's Republic of China
Contribution: Data curation (equal)
Search for more papers by this authorHui Tu
College of Materials Engineering, Xuzhou College of Industrial Technology, Xuzhou, People's Republic of China
Contribution: Data curation (equal)
Search for more papers by this authorZaixue Wang
College of Materials Engineering, Xuzhou College of Industrial Technology, Xuzhou, People's Republic of China
Contribution: Data curation (equal), Resources (equal), Software (equal)
Search for more papers by this authorMin Deng
College of Materials Engineering, Xuzhou College of Industrial Technology, Xuzhou, People's Republic of China
Contribution: Software (equal)
Search for more papers by this authorJianming Zhang
Rubber & Plastic Materials and Engineering Ministry of Education Key Laboratory, Qingdao University of Science and Technology, Qingdao, People's Republic of China
Contribution: Data curation (equal), Methodology (equal)
Search for more papers by this authorYanan Zang
College of Materials Engineering, Xuzhou College of Industrial Technology, Xuzhou, People's Republic of China
Contribution: Data curation (supporting), Methodology (supporting)
Search for more papers by this authorPeipei Li
College of Materials Engineering, Xuzhou College of Industrial Technology, Xuzhou, People's Republic of China
Contribution: Software (supporting)
Search for more papers by this authorHouluo Cong
College of Materials Engineering, Xuzhou College of Industrial Technology, Xuzhou, People's Republic of China
Contribution: Formal analysis (supporting)
Search for more papers by this authorShuaishuai Song
College of Materials Engineering, Xuzhou College of Industrial Technology, Xuzhou, People's Republic of China
Contribution: Methodology (supporting)
Search for more papers by this authorFeng Liu
College of Materials Engineering, Xuzhou College of Industrial Technology, Xuzhou, People's Republic of China
Contribution: Data curation (supporting), Methodology (supporting)
Search for more papers by this authorAbstract
In this work, the application of reclaimed ground tire rubber (RGTR) and butyl reclaimed rubber (BRR) in the inner liner rubber were investigated. Carbon black dispersion, rheological, mechanical, tear strength, dynamic compression heat build-up, aging performance, and gas barrier properties of tire inner liner were evaluated to analyze the effects of reclaimed rubbers on the tire application. It was found that RGTR improves carbon black dispersion and tear strength of tire inner liner, while maintaining comparable tensile strength, particularly with low amount of RGTR. Furthermore, compounds containing lower amounts of RGTR exhibit reduced heat build-up during dynamic compression tests. Additionally, RGTR with higher reclamation degree demonstrates favorable aging performance, and has superior gas barrier properties at lower amount. These findings suggest promising opportunities for the application of reclaimed rubber to enhance the performance inner liner of Radial Engineering Tires and contribute to the waste management.
CONFLICT OF INTEREST STATEMENT
The authors declare no conflict of interest.
Open Research
DATA AVAILABILITY STATEMENT
The data that support the findings of this study are available from the corresponding author upon reasonable request.
REFERENCES
- 1 U. S. Environmental Protection Agency, Profile of the Rubber and Plastic Industry, U. S. Environmental Protection Agency, washington, DC 2005, p EPA/310.
- 2J. I. Reisman, Air emissions from scrap tire combustion, EPA, Washington, DC, USA 1997.
- 3A. N. Gent, Engineering with Rubber: How to Design Rubber Components, Carl Hanser Verlag GmbH Co KG, Munich Germany, 2012.
10.3139/9783446428713 Google Scholar
- 4K. Collins, A. Jensen, J. Mallinson, V. Roenelle, I. Smith, J. Mar. Sci. 2002, 59, S243.
- 5B. Rodgers, Rubber Compounding: Chemistry and Applications, CRC Press, Boca Raton, Florida, USA 2015.
10.1201/b18931 Google Scholar
- 6P. E. Rosenfeld, L. Feng, Risks of Hazardous Wastes, William Andrew, Norwich, New York, USA 2011.
- 7X. X. Zhang, C. H. Lu, M. Liang, J. Appl. Polym. Sci. 2007, 103, 4087.
- 8X. Zhang, T. Wang, L. Ma, J. Chang, Waste Manage. 2008, 28, 2301.
- 9M. Perederii, M. Tsodikov, I. Malikov, Y. I. Kurakov, Solid Fuel Chem. 2011, 45, 102.
- 10E. Antonio, Annual Tire Technology International Conference, Essen, Germany 2005, p. 142.
- 11M. Swett, R. C. Challenge, Literature Review of the Water Quality Effects of Tire Derived Aggregate and Rubber Modified Asphalt Pavement, EPA, Washington, DC, USA 2006.
- 12R. Ahmed, A. van de Klundert, I. Lardinois, Rubber Waste: Options for Small-scale Resource Recovery Urban Solid Waste Series 3, Netherlands: WASTE. 1996.
- 13K. M. Feriha, R. A. Hussein, G. A. Ismail, H. M. El-Naggar, O. D. El-Sebaie, J. Environ. Eng. Ecol. Sci. 2014, 3, 5.
10.7243/2050-1323-3-5 Google Scholar
- 14J. Fiksel, B. R. Bakshi, A. Baral, E. Guerra, B. DeQuervain, Clean Techn. Environ. Policy 2011, 13, 19.
- 15B. Adhikari, D. De, S. Maiti, Prog. Polym. Sci. 2000, 25, 909.
- 16N. Sunthonpagasit, M. R. Duffey, Resour., Conserv. Recycl. 2004, 40, 281.
- 17S. Akbulut, S. Arasan, E. Kalkan, Appl. Clay Sci. 2007, 38, 23.
- 18 California Environmental Protection Agency, Sacramento California Integrated Waste Management Board, California Environmental Protection Agency, California 2004.
- 19M. W. Rouse, Rubber Recycling, The Rubber Manufacturers Association (RMA), Washington, DC, USA 2005, pp. 110–135.
- 20L. Ma, Z. Zhang, Z. Peng, K. Formela, S. Wang, J. Appl. Polym. Sci. 2021, 138, 51290.
- 21K. Khait, S. H. Carr, M. H. Mack, Solid-State Shear Pulverization, CRC Press, Boca Raton, Florida, USA 2001.
10.1201/9781420015010.ch8 Google Scholar
- 22 M, R, Recycling of Post-Consumer Scrap Rubber, New York State Department of Economic Development, Albany, New York, USA 1993.
- 23F. Stark Jr., D. Wagner, presented at Rubbercon, Gothenburg, Sweden 1995, p. 1.
- 24T. Ren, P. Song, W. Yang, K. Formela, S. F. Wang, J. Appl. Polym. Sci. 2023, 140, e53580.
- 25W. H. Waddell, S. Tracey, D. F. Rouckhout, KGK, Kautsch. Gummi Kunstst. 2006, 59, 659.
- 26A. A. Hassan, Z. Zhang, K. Formela, S. Wang, Compos. Sci. Technol. 2021, 214, 108991.
- 27Y. Zhang, Z. Zhang, A. M. Wemyss, C. Wan, Y. Liu, P. Song, S. Wang, ACS Sustainable Chem. Eng. 2020, 8, 9079.
- 28J. Shi, K. Jiang, D. Ren, H. Zou, Y. Wang, X. Lv, L. Zhang, J. Appl. Polym. Sci. 2013, 129, 999.
- 29G.-L. Zhuang, H.-H. Tseng, M.-Y. Wey, J. CO2 Util. 2018, 25, 226.
- 30O. Buitrago-Suescún, R. Britto, Iran. Polym. J. 2020, 29, 553.
- 31A. Zanchet, L. Carli, M. Giovanela, R. Brandalise, J. Crespo, Mater. Des. 2012, 39, 437.
- 32S. K. Srivastava, H. Acharya, Rubber Nanocomposites: Preparation, Properties, Applications, Wiley, Hoboken, New Jersey, USA 2010, p. 551.
10.1002/9780470823477.ch20 Google Scholar
- 33K. Jiang, J. Shi, Y. Ge, R. Zou, P. Yao, X. Li, L. Zhang, J. Appl. Polym. Sci. 2013, 127, 2397.
- 34E. Dannenberg, Rubber Chem. Technol. 1986, 59, 512.
- 35P. Song, C. Wan, Y. Xie, Z. Zhang, S. Wang, Polym. Test. 2018, 71, 115.
- 36G. He, T. Luo, Y. G. Dang, L. Zhou, Y. Y. Dai, X. Ji, RSC Adv. 2021, 11, 817.
- 37V. Litvinov, R. Orza, M. Kluppel, M. van Duin, P. Magusin, Macromolecules 2011, 44, 4887.
