Thermoplastic vulcanizates based on epoxidized natural rubber/polypropylene blends: Effect of epoxide levels in ENR molecules

Epoxidized natural rubbers (ENR) with various levels of epoxide groups were prepared. Thermoplastic vulcanizates based on 75/25 ENRs/PP blends with Ph-PP compatibilizer were later prepared by dynamic vulcanization using sulfur curing system. Influence of various levels of epoxide groups on rheological, mechanical morphological properties, and swelling resistance of the TPVs was investigated. It was found that the mixing torque, apparent shear stress, apparent shear viscosity, tensile strength, and hardness properties increased with increasing levels of epoxide groups in the ENR molecules. This may be attributed to increasing level of chemical interaction between the methylol groups of the Ph-PP molecules and polar functional groups of the ENR molecules. Also, the PP segments in the Ph-PP molecules are capable of compatibilizing with the PP molecules used as a blend composition. In SEM micrographs, we observed finer dispersion of vulcanized rubber domains as increasing levels of epoxide contents. This corresponds to increasing trend of strength and hardness properties of the TPVs. An increasing trend of tension set and a decreasing trend of elongation at break were observed as increasing levels of epoxide groups in the ENR molecules. This is because of higher rigidity of the vulcanized ENR phase with higher epoxide groups. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 3046–3052, 2006