Separation of Non-Metallic Inclusions from Aluminum Melt by Super Gravity
Gaoyang Song
School of Metallurgical and Ecological Engineering, University of Science and Technology, Beijing, Xueyuan Road 30, Haidian District, Beijing 100083, China
State Key Laboratory of Advanced Metallurgy, University of Science and Technology Beijing, Xueyuan Road 30, Haidian District, Beijing 100083, China
Search for more papers by this authorBo Song
School of Metallurgical and Ecological Engineering, University of Science and Technology, Beijing, Xueyuan Road 30, Haidian District, Beijing 100083, China
State Key Laboratory of Advanced Metallurgy, University of Science and Technology Beijing, Xueyuan Road 30, Haidian District, Beijing 100083, China
Search for more papers by this authorYuhou Yang
School of Metallurgical and Ecological Engineering, University of Science and Technology, Beijing, Xueyuan Road 30, Haidian District, Beijing 100083, China
State Key Laboratory of Advanced Metallurgy, University of Science and Technology Beijing, Xueyuan Road 30, Haidian District, Beijing 100083, China
Search for more papers by this authorShujian Jia
School of Metallurgical and Ecological Engineering, University of Science and Technology, Beijing, Xueyuan Road 30, Haidian District, Beijing 100083, China
State Key Laboratory of Advanced Metallurgy, University of Science and Technology Beijing, Xueyuan Road 30, Haidian District, Beijing 100083, China
Search for more papers by this authorMingming Song
School of Metallurgical and Ecological Engineering, University of Science and Technology, Beijing, Xueyuan Road 30, Haidian District, Beijing 100083, China
State Key Laboratory of Advanced Metallurgy, University of Science and Technology Beijing, Xueyuan Road 30, Haidian District, Beijing 100083, China
Search for more papers by this authorGaoyang Song
School of Metallurgical and Ecological Engineering, University of Science and Technology, Beijing, Xueyuan Road 30, Haidian District, Beijing 100083, China
State Key Laboratory of Advanced Metallurgy, University of Science and Technology Beijing, Xueyuan Road 30, Haidian District, Beijing 100083, China
Search for more papers by this authorBo Song
School of Metallurgical and Ecological Engineering, University of Science and Technology, Beijing, Xueyuan Road 30, Haidian District, Beijing 100083, China
State Key Laboratory of Advanced Metallurgy, University of Science and Technology Beijing, Xueyuan Road 30, Haidian District, Beijing 100083, China
Search for more papers by this authorYuhou Yang
School of Metallurgical and Ecological Engineering, University of Science and Technology, Beijing, Xueyuan Road 30, Haidian District, Beijing 100083, China
State Key Laboratory of Advanced Metallurgy, University of Science and Technology Beijing, Xueyuan Road 30, Haidian District, Beijing 100083, China
Search for more papers by this authorShujian Jia
School of Metallurgical and Ecological Engineering, University of Science and Technology, Beijing, Xueyuan Road 30, Haidian District, Beijing 100083, China
State Key Laboratory of Advanced Metallurgy, University of Science and Technology Beijing, Xueyuan Road 30, Haidian District, Beijing 100083, China
Search for more papers by this authorMingming Song
School of Metallurgical and Ecological Engineering, University of Science and Technology, Beijing, Xueyuan Road 30, Haidian District, Beijing 100083, China
State Key Laboratory of Advanced Metallurgy, University of Science and Technology Beijing, Xueyuan Road 30, Haidian District, Beijing 100083, China
Search for more papers by this authorJiann-Yang Hwang
Search for more papers by this authorGerardo R. F. Alvear F.
Search for more papers by this authorOnuralp Yücel
Search for more papers by this authorXinping Mao
Search for more papers by this authorHong Yong Sohn
Search for more papers by this authorNaiyang Ma
Search for more papers by this authorPhillip J. Mackey
Search for more papers by this authorThomas P. Battle
Search for more papers by this authorSummary
This chapter contains sections titled:
-
Introduction
-
Experiment
-
Results and Discussion
-
Conclusions
-
Acknowledgement
References
- P.N. Grepeau, “Molten aluminum contamination: gas, inclusions and dress,” Modern Casting, 87 (7) (1997), 39–41.
- N. El-Kaddah, A.D. Patel, and T.T. Natarajan, “The electromagnetic filtration of molten aluminum using an induced-current separator,” JOM, 47 (5) (1995), 46–49.
- S. Shimasaki et al., “Separation of Inclusion Particles from Liquid Metal by Electromagnetic Force,” 13th International Conference on Aluminum Alloys(ICAA13), ed. Hasso Weiland, Anthony D. Rollett and William A. Cassada (Pittsburgh, PA: TMS, 2012), 1321-1326.
- Q.T. Guo et al., “Separation efficiency of alumina particles in Al melt under high frequency magnetic field,” T NONFERR METAL SOC, 20 (1) (2010), 153–157.
- B.W. Zhang, Z.M. Ren, and J.X. Wu, “Continuous electromagnetic separation of inclusion from aluminum melt using alternating current,” T NONFERR METAL SOC, 16 (1) (2006), 33–38.
- F. Frisvold et al., “Removal of Inclusions - A Survey and Comparison of Principles,” Essential Readings in Light Metals: Cast Shop for Aluminum Production, 3 (1992), 324–331.
- Hiromi Matsubara, Norihisa Izawa, and Masura Nakunishi, “Macroscopic Segregation in Al-11 Mass-Si Alloy Containing 2 Mass-Fe Solidified under Centrifugal Force,” Japanese Journal of Institute of Light Metals, 48 (2) (1998), 93–97.
- L.X. Zhao et al., “Removal of Low-Content Impurities from Al By Super-Gravity,” Metallurgical and Materials Transactions B, 41 (B) (2010), 505–508.
- J.C. LI, Z.C. GUO, and J.T. GAO, “Isothermal Enriching Perovskite Phase from CaO–TiO2–SiO2–Al2O3–MgO Melt by Super Gravity,” ISIJ International, 54 (4) (2014), 743–749.
- J.T. GAO, J.C. LI, and Z.C. GUO, “Separation of Perovskite Phase from CaO-TiO2-SiO2-Al2O3-MgO System by Supergravity,” 5th International Symposium on High-Temperature Metallurgical Processing ed. Tao Jiang and Joseph Lessard (San Diego, CA: TMS, 2014), 67-72.
- C.G. Kang, and P.K. Rohatgi, “Transient thermal analysis of solidification in a centrifugal casting for composite materials containing particle segregation,” Metallurgical and Materials Transactions B, 27 (2) (1996), 277–285.
- Y. Watanabe, N. Yamanaka, and Y. Fukui, “Control of composition gradient in a metalceramic functionally graded material manufactured by the centrifugal method,” Composites Part A: Applied Science and Manufacturing, 29 (5) (1998), 595–601.
