Assessment of Gas‐Metal‐Slag Interaction in a Steel Making Ladle Through Physical and Mathematical Modelling - 6th International Symposium on High‐Temperature Metallurgical Processing - Wiley Online Library

Zhejiang Agr & For University

Zhejiang Agr & For University

Search term
Advanced Search Citation Search
Search term
Advanced Search Citation Search

Assessment of Gas-Metal-Slag Interaction in a Steel Making Ladle Through Physical and Mathematical Modelling

Augusto Pereira de Sa,

Augusto Pereira de Sa

augustop [email protected]

REDEMAT - Federal University of Ouro Preto, 35400-000, Ouro Preto, MG, Brazil

Search for more papers by this author

Varadarajan Seshadri,

Varadarajan Seshadri

[email protected]

Metallurgical and Materials Engineering. Department, Federal University of Minas Gerais, 6627, Av. Antonio Carlos, 31.270-901 Belo Horizonte, Brazil

Search for more papers by this author

Itavahn Alves da Silva,

Itavahn Alves da Silva

[email protected]

Metallurgical and Materials Engineering. Department, Federal University of Ouro Preto, 35400-000, Ouro Preto, MG, Brazil

Search for more papers by this author

Filipe de Menezes Torres,

Filipe de Menezes Torres

[email protected]

Metallurgical and Materials Engineering. Department, Federal University of Ouro Preto, 35400-000, Ouro Preto, MG, Brazil

Search for more papers by this author

Carlos Antonio da Silva,

Carlos Antonio da Silva

[email protected]

Metallurgical and Materials Engineering. Department, Federal University of Ouro Preto, 35400-000, Ouro Preto, MG, Brazil

Search for more papers by this author

Eliana Ferreira Rodrigues,

Eliana Ferreira Rodrigues

[email protected]

Metallurgical and Materials Engineering. Department, Federal University of Ouro Preto, 35400-000, Ouro Preto, MG, Brazil

Search for more papers by this author

Augusto Pereira de Sa,

Augusto Pereira de Sa

augustop [email protected]

REDEMAT - Federal University of Ouro Preto, 35400-000, Ouro Preto, MG, Brazil

Search for more papers by this author

Varadarajan Seshadri,

Varadarajan Seshadri

[email protected]

Metallurgical and Materials Engineering. Department, Federal University of Minas Gerais, 6627, Av. Antonio Carlos, 31.270-901 Belo Horizonte, Brazil

Search for more papers by this author

Itavahn Alves da Silva,

Itavahn Alves da Silva

[email protected]

Metallurgical and Materials Engineering. Department, Federal University of Ouro Preto, 35400-000, Ouro Preto, MG, Brazil

Search for more papers by this author

Filipe de Menezes Torres,

Filipe de Menezes Torres

[email protected]

Metallurgical and Materials Engineering. Department, Federal University of Ouro Preto, 35400-000, Ouro Preto, MG, Brazil

Search for more papers by this author

Carlos Antonio da Silva,

Carlos Antonio da Silva

[email protected]

Metallurgical and Materials Engineering. Department, Federal University of Ouro Preto, 35400-000, Ouro Preto, MG, Brazil

Search for more papers by this author

Eliana Ferreira Rodrigues,

Eliana Ferreira Rodrigues

[email protected]

Metallurgical and Materials Engineering. Department, Federal University of Ouro Preto, 35400-000, Ouro Preto, MG, Brazil

Search for more papers by this author

Book Editor(s):Tao Jiang,

Tao Jiang

Search for more papers by this author

Jiann-Yang Hwang,

Jiann-Yang Hwang

Search for more papers by this author

Gerardo R. F. Alvear F.,

Gerardo R. F. Alvear F.

Search for more papers by this author

Onuralp Yücel,

Onuralp Yücel

Search for more papers by this author

Xinping Mao

Search for more papers by this author

Hong Yong Sohn,

Hong Yong Sohn

Search for more papers by this author

Naiyang Ma

Search for more papers by this author

Phillip J. Mackey,

Phillip J. Mackey

Search for more papers by this author

Thomas P. Battle,

Thomas P. Battle

Search for more papers by this author

First published: 16 February 2015

https://doi.org/10.1002/9781119093381.ch50

Summary

This chapter contains sections titled:

Introduction
Materials and Methods
Results and Discussion
Conclusions
Acknowledgements

References

Q. Shu, O. Volkova, S. Lachmann and P. Scheller Modification of inclusion composition in steel during secondary metallurgical ladle treatment. A comprehensive process simulation model. Aistech-conference proceedings; 2; 2011, 537-548
Google Scholar
S. Subagyo, G.A. Brooks and G. A Irons Spout eyes area correlation in ladle metallurgy. (ISIJ International. 43 (2), 2003, 262–263.
CAS Web of Science® Google Scholar
C.A. Silva, I.A. Silva, V.A. Leão, V. Seshadri, O. Neto and V. Lambertucci Some aspects of slag-metal interaction in a two plume stirred ladle, Molten 2009. Proceedings of VIII international conference on molten slags, fluxes and salts, Santiago, Chile, Jan 2009, 751-760
Google Scholar
A.N. Conejo, S. Kitamura, N. M. Maruoka and S.J. Kim Effects of top layer, nozzle arrangement and gas flow rate on mixing time in agitated ladles by bottom gas injection. (Metallurgical and Materials Transactions B. 44 (4) 2013, 914–923.
CAS Web of Science® Google Scholar
S.P. Patil. D. Satish, M. Peranandhanathan and D. Mazumdar. Mixing models for slag covered, argon stirred ladles. (ISIJ International. 50 (8) 2010, 1117–24.
Web of Science® Google Scholar
J. Mandal, S. Patil, M. Madan and D. Mazumdar. Mixing time and correlation for ladles stirred with dual porous plugs. Metallurgical and Materials Transactions. 36B, 2005, 479-87
Google Scholar
C.J. Su, J.M Chou, S.H, Liu and C.H. Chiang. Effect of gas bottom blowing conditions on mixing of molten iron inside an ironmaking smelter. Materials Transactions. 51 (2010, 1594-1601
Google Scholar
M. Zhu Y. T. Inomoto, K. Sawada and T.C. Hsiao T Fluid flow and mixing phenomena in the ladle stirred by argon through multi tuyeres. (ISIJ International. 35 (5), 1995), 472–79.
CAS Web of Science® Google Scholar
http://www1.ansys.com/customer/content/documentation/130/cfx_thry.pdf
Google Scholar

6th International Symposium on High‐Temperature Metallurgical Processing

The full text of this article hosted at iucr.org is unavailable due to technical difficulties.