Computational Modeling and Simulation of Alloy 718
David Furrer,
Vasisht Venkatesh,
Fan Zhang,
Daniel Gynther,
Ted Asare,
Dmitri Novikov,
Sergei Burlatsky,
David Furrer
Pratt & Whitney, 400 Main Street, East Hartford, CT 06118, USA
Search for more papers by this authorVasisht Venkatesh
Pratt & Whitney, 400 Main Street, East Hartford, CT 06118, USA
Search for more papers by this authorFan Zhang
CompuTherm LLC, 437 S. Yellowstone Dr., Suite 217, Madison, WI 53719, USA
Search for more papers by this authorDaniel Gynther
Pratt & Whitney, 400 Main Street, East Hartford, CT 06118, USA
Search for more papers by this authorTed Asare
Pratt & Whitney, 400 Main Street, East Hartford, CT 06118, USA
Search for more papers by this authorDmitri Novikov
United Technologies Research Center, 411 Silver Ln., East Hartford, CT 06108, USA
Search for more papers by this authorSergei Burlatsky
United Technologies Research Center, 411 Silver Ln., East Hartford, CT 06108, USA
Search for more papers by this authorDavid Furrer,
Vasisht Venkatesh,
Fan Zhang,
Daniel Gynther,
Ted Asare,
Dmitri Novikov,
Sergei Burlatsky,
David Furrer
Pratt & Whitney, 400 Main Street, East Hartford, CT 06118, USA
Search for more papers by this authorVasisht Venkatesh
Pratt & Whitney, 400 Main Street, East Hartford, CT 06118, USA
Search for more papers by this authorFan Zhang
CompuTherm LLC, 437 S. Yellowstone Dr., Suite 217, Madison, WI 53719, USA
Search for more papers by this authorDaniel Gynther
Pratt & Whitney, 400 Main Street, East Hartford, CT 06118, USA
Search for more papers by this authorTed Asare
Pratt & Whitney, 400 Main Street, East Hartford, CT 06118, USA
Search for more papers by this authorDmitri Novikov
United Technologies Research Center, 411 Silver Ln., East Hartford, CT 06108, USA
Search for more papers by this authorSergei Burlatsky
United Technologies Research Center, 411 Silver Ln., East Hartford, CT 06108, USA
Search for more papers by this authorBook Editor(s):Eric Ott, Anthony Banik,
Joel Andersson,
Ian Dempster,
Tim Gabb, Jon Groh, Karl Heck, Randy Helmink,
Xingbo Liu,
Agnieszka Wusatowska-Sarnek,
Anthony Banik
Search for more papers by this authorJoel Andersson
Search for more papers by this authorIan Dempster
Search for more papers by this authorRandy Helmink
Search for more papers by this authorXingbo Liu
Search for more papers by this authorAgnieszka Wusatowska-Sarnek
Search for more papers by this authorSummary
This chapter contains sections titled:
-
Introduction
-
Application and Opportunity for Alloy 718
-
Advances in Modeling and Simulation Methods
-
Examples of Industrial Application of Modeling and Simulation to Alloy 718
-
Conclusions
References
- G. Shen, D. Kahlke, R. Denkenberger, and D. Furrer, “ Advances in the State-of-the-Art of Hammer Forged Alloy 718 Aerospace Components”, Superalloys 718, 625, 706 and Various Derivatives, ed. E.A. Loria, TMS, 2001, 237-247.
10.7449/2001/Superalloys_2001_237_247 Google Scholar
- G. Shen, N. Cooper, N. Ottow, R. Goetz and J. Matlik, “ Integration and Automation of Residual Stress and Service Stress Modeling for Superalloy Component Design”, Superalloys 2012: 12th International Symposium on Superalloys, Eds., E. S. Huron, et. al., TMS, 2012, pp. 129–134.
10.1002/9781118516430.ch14 Google Scholar
- D. Furrer, R. Goetz, and G. Shen, “ Modeling and Simulation of Alloy 718 Microstructure and Mechanical Properties”, proceedings of the 7th International Symposium on Superalloy 718 & Derivatives, October 10-13, 2010, Pittsburgh, Pennsylvania, TMS, 2010.
- Reed, Roger C. The superalloys: fundamentals and applications. Cambridge University Press, 2006.
10.1017/CBO9780511541285 Google Scholar
- G.B. Olson, “ Integrated Computational Materials Design: From Genome to Flight”, Proceedings of 54th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, 2011, AIAA, pp. 1–10.
- D. U. Furrer, J. Schirra, “ The Development of the ICME Supply-Chain: Route to ICME Implementation and Sustainment” TMS, JoM, April, 2011, pp. 38–45.
- W. Gostic, “ Application of Materials and Process Modeling to the Design, Development and Sustainment of Advanced Turbine Engines”, Superalloys 2012: 12th International Symposium on Superalloys, Eds., E. S. Huron, et. al., TMS, 2012, pp. 3–12.
- M.A. Rist, S. Tin, B.A. Roder, J.A. James, and MR. Daymond, “Residual Stresses in a Quenched Superalloy Turbine Disc: Measurements and Modeling”, Met. Trans. A,Vol. 37A, February 2006, pp 459-467
- D. Dye, K.T. Conlon, and R.C. Reed, “Characterization and Modeling of Quenching-Induced Residual Stresses in the Nickel-Based Superalloy IN718”, Met. Trans. A, Vol. 35A, June 2004, pp 1703-1713.
- M. G. Glavicic, V. Venkatesh, “ Integrated Computational Materials Engineering of Titanium: Current Capabilities Being Developed under the Metals Affordability Initiative”, JOM, to be submitted for review, June 2014 Publication.
- Cao W, Chen SL, Zhang F, Wu K, Yang Y, Chang YA, Schmid-Fetzer R, Oates WA, PANDAT software with PanEngine, PanOptimizer and PanPrecipitation for multicomponent phase diagram calculation and materials property simulation, Calphad 33 (2009) pp. 328–342.
- PanNI-the thermodynamic database of Nickel-based alloys for Pandat (http://www.computherm.com)
- Y.-F. Han, P. Deb, and M. C. Chaturvedi, “Coarsening behaviour of γ″ - γ′-particles in Inconel alloy 718”, Metal Science, Vol 16, Dec 1982, page 555–561.
- W.-D. Cao, “ Thermal Stability Characterization of Ni-Base ATI 718Plus® Superalloy”, Superalloys 2008, eds., R. C. Reed et. al., TMS, 2012, pp. 789–797.
- P. Roamer, C. J. Van Tyne, D. K. Matlok, A. M. Meier, H. Ruble, and F. Suarez, “ Room Temperature Formability of Alloy 625LCF™, 718, and 718SPF™”, Superalloys 718, 625, 706 and Various Derivatives, ed. E. A. Loria, TMS, 1996, pp 315-329.
- L. A. Jackman, G. J. Smith, A. W. Dix and M. L. Lasande, “ Rotary Forge Processing of Direct Aged Inconel 718 for Aircraft Engine Shafts”, Superalloys 718, 625 and Various Derivatives, ed. E. A. Loria, TMS, 1991, pp 125-132.
10.7449/1991/Superalloys_1991_125_132 Google Scholar
- M. Wardell, J. F. Radavich, and E. A. Loria, “ Heat Treatment of Variables on Microstructue and Mechanical Properties of Cast PWA1472”, Superalloys 718, 625, 706 and Various Derivatives, Ed. E. A. Loria, TMS, 1994, pp. 451–462.
10.7449/1994/Superalloys_1994_451_462 Google Scholar
- B. Peterson, D. Frias, D. Brayshaw, R. Helmink, E. Ott, R. Benn, and M. Uchic, “ On the Development of Cast ATI 718Plus® Alloy for Structural Gas Turbine Components”, Superalloys 2012: 12th International Symposium on Superalloys, Eds., E. S. Huron, et. al., TMS, 2012, pp. 787–802.
10.1002/9781118516430.ch87 Google Scholar
- D. U. Furrer, “ Application of phase-field modeling to industrial materials and manufacturing processes”, Current Opinion in Solid State and Materials Science, Elsevier, 2011.
- Z. Chu, Z. Chen, Y. Wang, Y. Lu, and Y. Li, “Microscopic Phase-Field Simulation of Competing Mechanism Between L12 and DO22 Structures in Ni-Cr-Al Alloy”, J. Mat. Sci. Technol., Vol. 22, No. 2, 2006, pp. 315–320
- V.V. Atrazhev, S.F. Burlatsky, Y.N. Gornostyrev, D.V. Dmitriev, D. Furrer, N.Y. Kuzminyh, I.L. Lomaev, D.L. Novikov, S. Stolz, P. Reynolds, “ The mechanism of grain boundary serration and fan-type structures formation in Ni-based superalloys”, to be published.
- I.L. Lomayev, D. L. Novikov, S. V. Okatov, Y. N. Gornostyrev, A. Cetel, M. Maloney, K. Schlichting, B. Cowles, R. Montero, and S. F. Burlatsky, “Fast Sulfur Diffusion in 3d Transition Metals”, Acta Materialia, Vol. 67, 2014, pp. 95–101
- K. Ma, R. Goetz, and S. K. Srivatsa, “ Modeling of Residual Stress and Machining Distortion in Aerospace Components”, ASM Metals Handbook, Vol. 22B, Metals Process Simulation, Eds, D. U. Furrer, and S. L. Semiatin, ASM-International, 2010, pp. 386–408.
- F. R. Preli and D. Furrer, “ Lessons Learned from Development, Application and Evolution of Alloy 718”, in this proceedings.
