Microstructural Analysis on 3D Printed Nickel-Based Alloy 718
Naing Naing Aung
Mechanical and Aerospace Engineering Department, West Virginia University, Morgantown, WV 26506, USA
Search for more papers by this authorTing Chen
Mechanical and Aerospace Engineering Department, West Virginia University, Morgantown, WV 26506, USA
Search for more papers by this authorJairus Morton
Mechanical and Aerospace Engineering Department, West Virginia University, Morgantown, WV 26506, USA
Search for more papers by this authorXingbo Liu
Mechanical and Aerospace Engineering Department, West Virginia University, Morgantown, WV 26506, USA
Search for more papers by this authorNaing Naing Aung
Mechanical and Aerospace Engineering Department, West Virginia University, Morgantown, WV 26506, USA
Search for more papers by this authorTing Chen
Mechanical and Aerospace Engineering Department, West Virginia University, Morgantown, WV 26506, USA
Search for more papers by this authorJairus Morton
Mechanical and Aerospace Engineering Department, West Virginia University, Morgantown, WV 26506, USA
Search for more papers by this authorXingbo Liu
Mechanical and Aerospace Engineering Department, West Virginia University, Morgantown, WV 26506, USA
Search for more papers by this authorAnthony Banik
Search for more papers by this authorJoel Andersson
Search for more papers by this authorIan Dempster
Search for more papers by this authorRandy Helmink
Search for more papers by this authorXingbo Liu
Search for more papers by this authorAgnieszka Wusatowska-Sarnek
Search for more papers by this authorSummary
This chapter contains sections titled:
-
Introduction
-
Materials and Experiments
-
Results and Discussions
-
Conclusions
References
- Z. Wang et al., “The Microstructure and Mechanical Properties of Deposited-IN718 by Selective Laser Melting,” Journal of Alloys and Compounds, 513 (2012) 518-523.
- T.J. Horn, and Ola L.A. Harrysson, “Overview of Current Additive Manufacturing Technologies and Selected Applications,” Science Progress, 95 (2012) 255–282.
- M. Vaezi, H. Seitz, and S.F. Yang, “A Review on 3D Micro-Additive Manufacturing Technologies,” International Journal of Advanced Manufacturing Technology, 67 (2013) 1721-1754.
- D. Manfredi et al., “Direct Metal Laser Sintering: an Additive Manufacturing Technology Ready to Produce Lightweight Structural Parts for Robotic Applications,” METALLURGIA ITALIANA, 10 (2013) 15-24.
- Q.B. Jia, and D.D. Gu, “Selective Laser Melting Additive Manufacturing of Inconel 718 Superalloy Parts: Densification, Microstructure and Properties,” Journal of Alloys and Compounds, 585 (2014) 713-721.
- G.A. Rao et al., “Effect of Standard Heat Treatment on the Microstructure and Mechanical Properties of Hot Isostatically Pressed Superalloy Inconel 718,” Materials Science and Engineering A, 355 (2003) 114-125.
- L. Chang et al., “Effect of Heat Treatment on Microstructure and Mechanical Properties of the Hot-isostatic-Pressed Inconel 718 Powder Compact,” Journal of Alloys and Compounds, 590 (2014) 227-232.
- S.X. Jin et al., “Evolution of Precipitate in Nickel-Base Alloy 718 Irradiated with Argon Ions at Elevated Temperature,” Nuclear Instruments and Methods in Physics Research B, 307 (2013) 522-525.
- F.C. Liu et al., “Effect of Intermediate Heat Treatment Temperature on Microstructure and Notch Sensitivity of Laser Solid Formed Inconel 718 Superalloy,” Journal of Wuhan University of Technology-Materials Science Edition, 26 (2011) 908-913.
- S.H. Chang et al., “Influences of Soaking Time in Hot Isostatic Pressing on Strength of Inconel 718 Superalloy,” Materials Transactions, 47 (2006) 426-432.
- C.N. Wei, H.Y. Bor, and L. Chang, “Effect of Hot Isostatic Pressing on Microstructure and Mechanical Properties of CM-681LC Nickel-Base Superalloy Using Microcast,” Materials Transactions, 49 (2008) 193-201.
- A. Chamanfar et al., “Microstructural Characteristics of Forged and Heat Treated Inconel-718 Disks.” Materials and Design 52 (2013) 791-800.
- M. Dehmas et al., “TEM Study of High-Temperature Precipitation of Delta Phase in Inconel 718 alloy.” Advances in Materials Science and Engineering, 2011 (2011) 1–9.
- C.M. Kuo et al., “Aging Effects on the Microstructure and Creep Behavior of Inconel 718 Superalloy.” Materials Science and Engineering A, 510-511 (2009) 289-94.
- M. Preuss, P.J. Withers and G.J. Baxter. “A Comparison of Inertia Friction Welds in Three Nickel Base Superalloys.” Materials Science and Engineering A, 437 (2006) 38-45.
