Impact of the Solution Cooling Rate and of Thermal Aging on the Creep Properties of the New Cast & Wrought René 65 Ni-Based Superalloy
Aude Laurence
Institut Pprime, UPR CNRS n° 3346, CNRS – Université de Poitiers – ENSMA, Physics and Mechanics of Materials Department, ISAE-ENSMA, 1 avenue Clement Ader, BP 40109, 86961 Futuroscope - Chasseneuil, France
Snecma-Safran Group, Technical Department, 171 boulevard de Valmy - BP 31, 92702 Colombes Cedex, France
Search for more papers by this authorJonathan Cormier
Institut Pprime, UPR CNRS n° 3346, CNRS – Université de Poitiers – ENSMA, Physics and Mechanics of Materials Department, ISAE-ENSMA, 1 avenue Clement Ader, BP 40109, 86961 Futuroscope - Chasseneuil, France
Search for more papers by this authorPatrick Villechaise
Institut Pprime, UPR CNRS n° 3346, CNRS – Université de Poitiers – ENSMA, Physics and Mechanics of Materials Department, ISAE-ENSMA, 1 avenue Clement Ader, BP 40109, 86961 Futuroscope - Chasseneuil, France
Search for more papers by this authorThomas Billot
Snecma-Safran Group, Technical Department, 171 boulevard de Valmy - BP 31, 92702 Colombes Cedex, France
Search for more papers by this authorJean-Michel Franchet
Safran SA, Materials & Process Division – Research and Technology Center (CRT), 171 boulevard de Valmy - BP 31, 92702 Colombes Cedex, France
Search for more papers by this authorFlorence Pettinari-Sturmel
CEMES, UPR CNRS n° 8011, 29 rue Jeanne Marvig - BP 94347, 31055 Toulouse Cedex 4, France
Search for more papers by this authorMuriel Hantcherli
CEMES, UPR CNRS n° 8011, 29 rue Jeanne Marvig - BP 94347, 31055 Toulouse Cedex 4, France
Search for more papers by this authorFrederic Mompiou
CEMES, UPR CNRS n° 8011, 29 rue Jeanne Marvig - BP 94347, 31055 Toulouse Cedex 4, France
Search for more papers by this authorAndrew Wessman
GE Aviation, Structural Materials Development, One Neumann Way, Cincinnati, OH 45215-1988, USA
Search for more papers by this authorAude Laurence
Institut Pprime, UPR CNRS n° 3346, CNRS – Université de Poitiers – ENSMA, Physics and Mechanics of Materials Department, ISAE-ENSMA, 1 avenue Clement Ader, BP 40109, 86961 Futuroscope - Chasseneuil, France
Snecma-Safran Group, Technical Department, 171 boulevard de Valmy - BP 31, 92702 Colombes Cedex, France
Search for more papers by this authorJonathan Cormier
Institut Pprime, UPR CNRS n° 3346, CNRS – Université de Poitiers – ENSMA, Physics and Mechanics of Materials Department, ISAE-ENSMA, 1 avenue Clement Ader, BP 40109, 86961 Futuroscope - Chasseneuil, France
Search for more papers by this authorPatrick Villechaise
Institut Pprime, UPR CNRS n° 3346, CNRS – Université de Poitiers – ENSMA, Physics and Mechanics of Materials Department, ISAE-ENSMA, 1 avenue Clement Ader, BP 40109, 86961 Futuroscope - Chasseneuil, France
Search for more papers by this authorThomas Billot
Snecma-Safran Group, Technical Department, 171 boulevard de Valmy - BP 31, 92702 Colombes Cedex, France
Search for more papers by this authorJean-Michel Franchet
Safran SA, Materials & Process Division – Research and Technology Center (CRT), 171 boulevard de Valmy - BP 31, 92702 Colombes Cedex, France
Search for more papers by this authorFlorence Pettinari-Sturmel
CEMES, UPR CNRS n° 8011, 29 rue Jeanne Marvig - BP 94347, 31055 Toulouse Cedex 4, France
Search for more papers by this authorMuriel Hantcherli
CEMES, UPR CNRS n° 8011, 29 rue Jeanne Marvig - BP 94347, 31055 Toulouse Cedex 4, France
Search for more papers by this authorFrederic Mompiou
CEMES, UPR CNRS n° 8011, 29 rue Jeanne Marvig - BP 94347, 31055 Toulouse Cedex 4, France
Search for more papers by this authorAndrew Wessman
GE Aviation, Structural Materials Development, One Neumann Way, Cincinnati, OH 45215-1988, USA
Search for more papers by this authorAnthony Banik
Search for more papers by this authorJoel Andersson
Search for more papers by this authorIan Dempster
Search for more papers by this authorRandy Helmink
Search for more papers by this authorXingbo Liu
Search for more papers by this authorAgnieszka Wusatowska-Sarnek
Search for more papers by this authorSummary
This chapter contains sections titled:
-
Introduction
-
Material and Experimental Procedures
-
Experimental Results
-
Discussion
-
Conclusions
-
Acknowledgements
References
- L. Mataveli Suave, J. Cormier et al., “Microstructural evolutions during thermal aging of alloy 625: impact of temperature and forming process”, Metallurgical and Materials Transactions A, 45 (2014), 2963-2982
- S.T. Wlodek, M. Kelly et al., “ The structure of the Rene88DT”, (Paper presented at Superalloys 1996, Seven Springs, Champion, PA, USA, 1996), 129–136
- C.M.F. Rae, R.C. Reed, “The precipitation of topologically closed-packed phases in rhenium-containing superalloys”, Acta Materialia, 49 (2001), 4113-4125
- T. Billot, ” Comportement et endommagement en fatigue et fatigue-fluage à haute température de différents états microstructuraux du superalliage base-nickel Udimet 720”, (PhD. Thesis, ENSMA, 2010)
- P.R. Bhowal et al., “Effects of cooling rate and γ′ morphology on creep and stress-rupture properties of a powder metallurgy superalloy”, Metallurgical and Materials Transactions A, 21 (1990), 1709-1717
- R.C. Reed et al., “Characterization and modeling of the precipitation of the sigma phase in Udimet 720 and Udimet 720Li”, Metallurgical and Materials Transactions A, 30 (1999), 521-533
- S. Simonetti and P. Caron, “Role and behavior of μ phase during deformation of a nickel-based single crystal superalloy”, Materials Science and Engineering, A 254 (1998), 1-12
- J-B. le Graverend, J. Cormier et al., “Numerical simulation of γ/γ′ microstructural evolutions induced by TCP-phase in the MC2 nickel base single crystal superalloy”, Materials Science and Engineering, A 528 (2011), 2620-2634
- X.Z. Quin et al. “Long-term thermal exposure responses of the microstructure and properties of a cast Ni-base superalloy”, Materials Science and Engineering, A 543 (2012), 121-128
- J.X. Yang, Q. Zheng et al., “Formation of μ phase during thermal exposure and its effect on the properties of K465 superalloy”, Scripta Materialia, 55 (2006) 331-334
- J-E Vaunois, J. Cormier et al., (Paper presented at 7th International Symposium on Superalloy 718 and Derivatives, Pittsburgh, PA, USA, 2010), 199–213
- E.F. Rauch, M. Véron, et al., “ Automatic crystal orientation and phase mapping in TEM by precession diffraction”, Microscopy and Analysis Nanotechnology Supplement, November (2008), S5–s8
- D.M. Collins, L. Yan et al., ”Lattice misfit during ageing of polycristakkine nickel-base superalloy”, Acta Materialia, 61 (2013), 7791-7804
- I.M. Lifshitz and V.V. Slyozov, Journal of Physical Chemistry solids, 19 (1961), 35-50.
- C. Wagner, Zeitschrift für Elektrochemie, 65 (7/8) (1961), 581-591.
- B. Flageolet, P. Villechaise et al., “ Ageing characterization of the powder metallurgy superalloy N18”, (Paper presented at Superalloys 2004, Seven Springs, Champion, PA, USA, 2004), 371–379.
- S. Steuer, Z. Hervier et al., “Creep behavior under isothermal and non-isothermal conditions of AM3 single crystal superalloy for different solutioning cooling rates”, Materials Science and Engineering A, 601 (2014), 145-152
