Weldability and Welding Metallurgy of Haynes 282 Alloy - 8th International Symposium on Superalloy 718 and Derivatives - Wiley Online Library

Zhejiang Agr & For University

Zhejiang Agr & For University

Search term
Advanced Search Citation Search
Search term
Advanced Search Citation Search

Weldability and Welding Metallurgy of Haynes 282 Alloy

Jeremy L. Caron,

Jeremy L. Caron

Haynes International, Inc., Kokomo, IN 46094-9013, USA

Search for more papers by this author

Jeremy L. Caron,

Jeremy L. Caron

Haynes International, Inc., Kokomo, IN 46094-9013, USA

Search for more papers by this author

Book Editor(s):Eric Ott,

Eric Ott

Search for more papers by this author

Anthony Banik

Search for more papers by this author

Joel Andersson,

Joel Andersson

Search for more papers by this author

Ian Dempster

Search for more papers by this author

Tim Gabb

Search for more papers by this author

Jon Groh

Search for more papers by this author

Karl Heck

Search for more papers by this author

Randy Helmink

Search for more papers by this author

Xingbo Liu

Search for more papers by this author

Agnieszka Wusatowska-Sarnek,

Agnieszka Wusatowska-Sarnek

Search for more papers by this author

First published: 11 November 2014

https://doi.org/10.1002/9781119016854.ch23

Citations: 2

Summary

This chapter contains sections titled:

Introduction
Experimental Procedure
Results and Discussion
Summary and Conclusions
Acknowledgments

References

L. M. Pike, “ HAYNES® 282® Alloy - A New Wrought Superalloy Designed for Improved Creep Strength and Fabricability,” ASME Turbo Expo 2006, GT2006-91204 (2006).
Google Scholar
L. M. Pike, “ Development of a Fabricable Gamma-Prime (γ′) Strengthened Superalloy,” Superalloys 2008, ed. R. C. Reed et al. (Hoboken, NJ: John Wiley & Sons, Inc., TMS, 2008), 191-200.
10.7449/2008/Superalloys_2008_191_200
Google Scholar
AWS A3.0M/A3.0:2010, Standard Welding Terms and Definitions (Miami, FL: American Welding Society, 2009), 47.
Google Scholar
Haynes International, Inc., HAYNES® 282® Alloy, http://www.haynesintl.com/pdf/h3173.pdf (2008), 20-21.
Google Scholar
J. L. Caron and L. M. Pike, “ Weldability of HAYNES 282 Superalloy After Long-Term Thermal Exposure,” EURO Superalloys 2014, Accepted for Publication.
Google Scholar
D. A. Metzler, “A Gleeble®-based Method for Ranking the Strain-Age Cracking Susceptibility of Ni-Based Superalloys,” Welding Journal, 87 (2008), 249-s-256-s.
Google Scholar
D. A. Metzler, “Strain-Age Cracking Susceptibility of Ni-Based Superalloys as a Function of Strain Rate, Temperature, and Alloy Composition,” Welding Journal, 91 (2012), 163-s-168-s.
Google Scholar
C. D. Lundin et al., “The Varestraint Test,” Welding Research Council Bulletin, 280 (1982), 1-19.
Google Scholar
J. N. DuPont, J. C. Lippold, and S. D. Riser, Welding Metallurgy and Weldability of Nickel-Base Alloys, (Hoboken, NJ: John Wiley & Sons, Inc., 2009).
10.1002/9780470500262
Google Scholar
J. F. Radavich, “ Electron Metallography of Alloy 718,” Superalloys 718, 625, 710 and Various Derivatives, ed. E. A. Loria, 17–26 (1997).
Google Scholar
D. C. Tung and J. C. Lippold, “ Weld Solidification Behavior of Ni-Base Superalloys for Use in Advanced Supercritical Coal-Fired Power Plants,” Superalloys 2012, ed. E. S. Huron et al. (Hoboken, NJ: John Wiley & Sons, Inc., TMS, 2012), 563-567.
10.1002/9781118516430.ch62
Google Scholar
D. H. Bechetti, “ Microstructural Evolution and Creep Rupture Behavior of INCONEL® Alloy 740H® Fusion Welds,” Ph.D. Dissertation, Lehigh University, (2013).
Google Scholar
J. Andersson, G. Sjöberg, and M. Chaturvedi, “ Hot Ductility Study of HAYNES® 282® Superalloy,” 7th International Symposium on Superalloy 718 and Derivatives, ed. E. A. Ott et al. (TMS, 2010), 539-554.
Google Scholar
M. Qian and J. C. Lippold, “Effect of Multiple Postweld Heat Treatment Cycles on the Weldability of Waspaloy,” Welding Journal, 81 (2002), 233s–238s.
Web of Science® Google Scholar
M. Qian and J. C. Lippold, “Liquation Phenomena in the Simulated Heat-Affected Zone of Alloy 718 after Multiple Postweld Heat Treatment Cycles,” Welding Journal, 82 (2003), 145s–150s.
Google Scholar
J. J. Pepe and W. F. Savage, “Effects of Constitutional Liquation in 18-Ni Maraging Steels,” Welding Journal, 46 (1967), 411s-4422-s.
CAS Google Scholar
ø. Grong, Metallurgical Modelling of Welding, Second Edition, ed. H. K. D. H. Bhadeshia, (London, UK: The Institute of Materials, 1997).
Google Scholar
L. O. Osoba, R. G. Ding, and O. A. Ojo, “Improved Resistance to Laser Weld Heat-Affected Zone Microfissuring in a Newly Developed Superalloy HAYNES 282,” Metallurgical and Materials Transactions A, 43 (2012), 4281-4295.
10.1007/s11661-012-1212-7
CAS Web of Science® Google Scholar

Citing Literature

8th International Symposium on Superalloy 718 and Derivatives

The full text of this article hosted at iucr.org is unavailable due to technical difficulties.