Relationship Between the Tensile Properties, Microstructures and the Macrostructure of the Investment Complex-Shaped Casting
Jun Wang
Shanghai Key Lab of Advanced High-temperature Materials and Precision Forming, Shanghai Jiao Tong University; 800 Dongchuan RD. Minhang District, Shanghai, 200240, China
The State Key Laboratory of Metal Matrix Composites, Shanghai Jiao Tong University; 800 Dongchuan RD. Minhang District, Shanghai, 200240, China
Search for more papers by this authorHaiyan Gao
Shanghai Key Lab of Advanced High-temperature Materials and Precision Forming, Shanghai Jiao Tong University; 800 Dongchuan RD. Minhang District, Shanghai, 200240, China
Search for more papers by this authorMaodong Kang
Shanghai Key Lab of Advanced High-temperature Materials and Precision Forming, Shanghai Jiao Tong University; 800 Dongchuan RD. Minhang District, Shanghai, 200240, China
Search for more papers by this authorJun Wang
Shanghai Key Lab of Advanced High-temperature Materials and Precision Forming, Shanghai Jiao Tong University; 800 Dongchuan RD. Minhang District, Shanghai, 200240, China
The State Key Laboratory of Metal Matrix Composites, Shanghai Jiao Tong University; 800 Dongchuan RD. Minhang District, Shanghai, 200240, China
Search for more papers by this authorHaiyan Gao
Shanghai Key Lab of Advanced High-temperature Materials and Precision Forming, Shanghai Jiao Tong University; 800 Dongchuan RD. Minhang District, Shanghai, 200240, China
Search for more papers by this authorMaodong Kang
Shanghai Key Lab of Advanced High-temperature Materials and Precision Forming, Shanghai Jiao Tong University; 800 Dongchuan RD. Minhang District, Shanghai, 200240, China
Search for more papers by this authorAnthony Banik
Search for more papers by this authorJoel Andersson
Search for more papers by this authorIan Dempster
Search for more papers by this authorRandy Helmink
Search for more papers by this authorXingbo Liu
Search for more papers by this authorAgnieszka Wusatowska-Sarnek
Search for more papers by this authorSummary
This chapter contains sections titled:
-
Introduction
-
Materials and Experimental
-
Results and Discussion
-
Conclusions
-
Acknowledgement
References
- C. M. Kuo et al., “Aging effects on the microstructure and creep behavior of Inconel 718 superalloy,” Materials Science and Engineering: A, 510-511 (0) (2009), 289-294.
- D. Shahriari, M. H. Sadeghi, and A. Akbarzadeh, “Precipitate Dissolution during Heat Treatment of Nimonic 115 Superalloy,” Materials and Manufacturing Processes, 24 (5) (2009), 559-563.
- R. C. Reed, The Superalloys: Fundamentals and Appcations (Cambridge: Cambridge University Press, 2006), 1-8
10.1017/CBO9780511541285.003 Google Scholar
- U. Krupp et al., “Improving resistance to dynamic embrittlement and intergranular oxidation of nickel based superalloys by grain boundary engineering type processing,” Materials Science and Technology, 21 (11) (2005), 1247-1254.
- G. A. Rao et al., “Characterisation of hot isostatically pressed nickel base superalloy Inconel 718,” Materials Science and Technology, 19 (3) (2003), 313-321.
- A. Thomas et al., “High temperature deformation of Inconel 718,” Journal of materials processing technology, 111 (1) (2006), 469-472.
- Y. Wang et al., “Tensile deformation behavior of superalloy 718 at elevated temperatures,” Journal of Alloys and Compounds, 471 (1) (2009), 331-335.
- R. Sharghi-Moshtaghin, S. Asgari, “The influence of thermal exposure on the γ′ precipitates characteristics and tensile behavior of superalloy IN-738LC,” Journal of materials processing technology, 147 (3) (2004), 343-350.
- L. Z. He et al., “Effect of heat treatment on microstructures and tensile properties of Ni-base superalloy M963,” Materials Science and Engineering: A, 398 (1) (2005), 128-136.
- K. Prasad et al., “Tensile deformation behaviour of forged disc of IN 718 superalloy at 650d̀ C,” Materials & Design, 31 (9) (2010), 4502-4507.
- Y. Xiong et al., “Effect of fine-grained structure on the mechanical properties of superalloys K3 and K4169,” Science and Technology of advanced Materials, 2 (1) (2001), 7-11.
- D. G. L. Prakash, D. Regener, and W. J. J. Vorster, “Effect of position on the tensile properties in high-pressure die cast Mg alloy,” Journal of Alloys and Compounds, 470 (1-2) (2009), 111-116.
- A. M. Gokhale and G. R. Patel, “Origins of variability in the fracture-related mechanical properties of a tilt-pour-permanent-mold cast Al-alloy,” Scripta Materialia, 52 (3) (2005), 237-241.
- J. H. Du et al., “High-temperature structure stability and mechanical properties of novel 718 superalloy,” Materials Science and Engineering: A, 452 (2007), 584-591.
- J. Campbell and M. Tiryakioğlu, “Bifilm Defects in Ni-Based Alloy Castings,” Metallurgical and Materials Transactions B, 43B (2012) 1-13.
- C. Slama and M. Abdellaoui, “Structural characterization of the aged Inconel 718,” Journal of Alloys and Compounds, 306 (1) (2000), 277-284.
- S. H. Chang, S. C. Lee, and K. T. Huang, “Influences of gamma and delata and Precipitations on the Microstructural Properties of 718 Alloy through HIP, Solid-Solution, and Different Aging Heat Treatments,” Materials Transactions 51 (9) (2010), 1683-1688
- N. D'Souza et al., “Morphological aspects of competitive grain growth during directional solidification of a nickel-base superalloy, CMSX4,” Journal of Materials Science, 37 (3) (2002), 481-487.
- J. Campbell, “Entrainment defects,” Materials Science and Technology, 22 (2) (2006), 127-145.
- J. T. Staley Jr, M. Tiryakioglu, and J. Campbell, “The effect of hot isostatic pressing (HIP) on the fatigue life of A206-T71 aluminum castings,” Materials Science and Engineering: A, 465 (1-2) (2007), 136-145.
- G. Appa Rao and S. D. V. V. Satyanarayana, “Influence of HIP processing on microstructure and mechanical properties of superalloy Udimet 720 LI,” Materials Science and Technology, 27 (2) (2011), 478-486.
- T. Alam et al., “Precipitation and clustering in the early stages of ageing in Inconel 718,” Materials Science and Engineering: A, 527 (29) (2010), 7770-7774.
- M. C. Chaturvedi and Y. Han, “Strengthening mechanisms in Inconel 718 superalloy,” Metal science, 17 (3) (1983), 145-149.
