Lessons Learned from the Development, Application and Advancement of Alloy 718

I.S. Hwang, R. G. Ballinger, M. M. Morra, B. Tao, and S. Matthew, “ Improved Mechanical Properties of Alloy 718 by Anneal and Direct Aging Process for Nuclear Fusion Applications”, Superalloys 718, 625 and Various Derivatives,June 23-26, 1991, Ed. E. A. Loria, TMS, pp. 621–633.
10.7449/1991/Superalloys_1991_621_633
Google Scholar
S. Widge, W. P. Rehrer and J. F. Radavich, Effect of Varying Aluminum and Columbium Content on Harness and Tensile Properties of 718 Alloy Heat Treated for Oil Field Requirements”, Superalloy 718-Metallurgy ad Applications, Ed. E. A. Loria, TMS, 1989, pp. 363–380.
10.7449/1989/Superalloys_1989_363_380
Google Scholar
L. Raymond, “ Effect of Chemistry and Processing on the Structure and Mechanical Properties of Inconel Alloy 718”, Superalloy 718-Metallurgy ad Applications, Ed. E. A. Loria, TMS, 1989, pp. 577–587.
Google Scholar
M. C. Chaturvedi and Y. Han, “ Creep Deformation of Alloy 718”, Superalloy 718-Metallurgy ad Applications, Ed. E. A. Loria, TMS, 1989, pp. 489–498.
10.7449/1989/Superalloys_1989_489_498
Google Scholar
G. K. Bouse and M. R. Behrendt, “ Mechanical Properties f Microcast-X® Alloy 718”, Superalloy 718-Metallurgy ad Applications, Ed. E. A. Loria, TMS, 1989, pp. 319–328.
10.7449/1989/Superalloys_1989_319_328
Google Scholar
G. Shen, R. Denkenberger, and D. Furrer, “ Aerospace Forging – Process and Modeling”, Materials Design Approaches and Experiences, ed. J.-C. Zhao, et. al., TMS, 2001, 347-357.
Google Scholar
G. Shen, D. Kahlke, R. Denkenberger, and D. Furrer, “ Advances in the State-of-the-Art of Hammer Forged Alloy 718 Aerospace Components”, Superalloys 718, 625, 706 and Various Derivatives, ed. E.A. Loria, TMS, 2001, 237-247.
10.7449/2001/Superalloys_2001_237_247
Google Scholar
P. Roamer et. al., “ Room Temperature Formability of Alloys 625LCF, 718 and 718SPF”, Superalloys 718, 625, 706 and Various Derivatives, June 15-18, 1997, Ed. E. A. Loria, TMS, pp. 315–329.
Google Scholar
G. E. Gapinski and T. J. Devine, “ Mechanical Properties and Microstructure of Fine Grain, Centrifugally Cast Alloy 718”, Superalloy 718-Metallurgy ad Applications, Ed. E. A. Loria, TMS, 1989, pp. 533–544.
10.7449/1989/Superalloys_1989_533_544
Google Scholar
M. E. Mehl and J. C. Lippold, Effect of 5-phase Precipitation on the Repair Weldability of Alloy 718, Superalloys 718, 625, 706 and Various Derivatives, June 15-18, 1997, Ed. E. A. Loria, TMS, pp. 731–741.
10.7449/1997/Superalloys_1997_731_741
Google Scholar
Wei-Di Cao, “ Thermal Stability Characterization of Ni-Base ATI 718Plus”, Superalloys 2008, Ed. R. A. Reed, et. al., TMS, 2008, pp. 789–797.
10.7449/2008/Superalloys_2008_789_797
Google Scholar
L. A. Jackman, et. al., “ Rotory Forge Processing of Direct Aged Inconel 718 for Aircraft Engine Shafts”, Superalloys 718, 625 and Various Derivatives, June 23-26, 1991, Ed. E. A. Loria, TMS, pp. 125–132.
10.7449/1991/Superalloys_1991_125_132
Google Scholar
M. Wardell, J. F. Radavich, and E. A. Loria, “ Heat Treatment of Variables on Microstructue and Mechanical Properties of Cast PWA1472”, Superalloys 718, 625, 706 and Various Derivatives, Ed. E. A. Loria, TMS 1994, pp. 451–462.
10.7449/1994/Superalloys_1994_451_462
Google Scholar
B. Peterson, D. Frias, D. Brayshaw, R. Helmink, E. Ott, R. Benn, and M. Uchic, “ On the Development of Cast ATI 718Plus® Alloy for Structural Gas Turbine Components”, Superalloys 2012: 12th International Symposium on Superalloys, Eds., E. S. Huron, et. al., TMS, 2012, pp. 787–802.
10.1002/9781118516430.ch87
Google Scholar
X. Liu et. al., “ Fatigue Crack Propagation Behavior of New Developed Allvac 718Plus Superalloy”, Superalloys 2004, Ed. K. A. Green, et. al., TMS, 2004, pp. 283–290.
Google Scholar
D. Furrer, V. Venkatesh, F. Zhang, D. Gynther, T. Asare, D. Novikov, and S. Burlatsky, “ Computational Modeling and Simulation of Alloy 718”, in this Proceedings.
Google Scholar
D. Furrer, R. Goetz, and G. Shen, “ Modeling and Simulation of Alloy 718 Microstructure and Mechanical Properties” in the proceedings of the 7th International Symposium on Superalloy 718 & Derivatives, October 10-13, 2010, Pittsburgh, Pennsylvania, TMS, 2010, pp. 663–678.
Google Scholar
R. Cao, P. Aubry and K. Verdier, “ Experimental Analysis of the Influence of Processing Parameters on the Melt Pool Formation and Stability in Powder Bed Laser”, in the proceedings of 32^nd International Congress on Applications of Lasers & Electro-Optics“, Oct. 6-10, 2013. Paper No. 1006.
Google Scholar
T. Maiwald-Immer, et. al., “ Application of ICME Methods for the Development of Rapid Manufacturing Technologies”, 2nd World Congress on Integrated Computational Materials Engineering, M. Li, ed., et. al., TMS, 2013, pp. 75–80.
10.1002/9781118767061.ch12
Google Scholar

Citing Literature

8th International Symposium on Superalloy 718 and Derivatives

Lessons Learned from the Development, Application and Advancement of Alloy 718

Summary

References

Citing Literature

References

Information

About Wiley Online Library

Help & Support

Opportunities

Connect with Wiley

Lessons Learned from the Development, Application and Advancement of Alloy 718

Summary

References

Citing Literature

References

Related

Information